CLEANING OF SEWAGE LINES, SEPTIC TANKS AND REPAIR / REPLACEMENT OF PLUMBING AND SANITARY WORKS AND WELCOME MAINT TO CERTAIN BLDGS UNDER AGE B/R RND SECUNDERABAD.

Amount

M&L for Cleaning of all blockage of any type of sewage line i.e, branch sewer line, main sewer line etc., by rodding and cleaning/disludging of manholes of any section and depth mechanically using super jetting machine or by suitable means as ordered and making the sewage line functional, cleaning the trap,water closet,soil, waste/vent pipe,gully traps upto final drop out let into first manhole/septic tanks and removing the sludge/foreign material and depositing the same outside the MOD land complete all as directed. Tentative quantities required to be cleaned per month shall be as under:- (a) 100mm bore sewage line -250Metre (b) 150mm bore sewage line -800Metre (c) 200mm bore sewage line -750 metre (d) Manholes of any size - 550 Nos (e) Trap/water closet -200 Nos The above mentioned quantities may be varied at the descretion of Engineer- in -charge as per requirement and nothing extra shall be claimed on this account.

Note :- (i) Adequate precautions and safety measures shall be taken while working under foul conditions and cost for the same shall be deemed to be included in the quoted rate.The contractor or his representative shall monitor entire process of cleaning adhering to standard safety practices while attending daily complaints. (ii) Contractor or his representative shall collect the complaints from complaint cell in job cards (as per specimen attached as Annex ‘A’) from the concerned JE on all days and the complaint shall be attended & rectified by the contractor on priority depending on the nature & urgency of complaint.The job card shall be returned to JE on completion of the complaint and duly signed by the User/Occupant . If the contractor or his representative fail to collect the complaints from the complaint cell on daily basis, a penal recovery of Rs.2500/day shall be recovered from the RAR/bill due to contractor.

Cleaning the septic tanks of Internal size of septic tanks (6.25 m x 4.57 m x 3.05 m) at Varun Vihar by dewatering all the water, taking out sludge, rigid soil by mobile tank cleaners and shifting / removing out side MOD land, flushing the septic tanks with clean water in order to remove all slaked mud sludge cleaning the tanks with bleaching powder solution and surface dressing all around the septic tank to a distance not exc 3 mtr complete all as directed.

All as per item No.2 but of Internal size of septic tanks (14.54 m x 3.54 m x 2.60 m) at Pratap Colony.

All as per item No.2 but of Internal size of septic tanks (6.25 m x 2.50 m x 3.05 m) at Transit Mess Note :- (i) All precaution to be taken while working foul condition.

Excavation in trenches 1.5 mtr in width and not exc 1.5 mtr in depth for foundations, manholes and getting out in hard/dense soil complete all as directed

M&L for cement concrete bed 1:3:6 type C2 to drain pipe 150 mm bore including packing under and haunching against the sides of pipes after they laid and tested including demolition of old concrete and removing debris outside of MOD land complete all as directed.

M&L for cement concrete bed 1:3:6 type C2 to drain pipe 200 mm bore including packing under and haunching against the sides of pipes after they laid and tested including demolition of old concrete and removing debris outside of MOD land complete all as directed.

M&L for Plain Cement Concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benching including necessary form work includiing demolition of existing PCC work complete all as directed.

M&L for 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including taking out existing old existing pipe complete all as directed

M&L for 200mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including taking out existing old existing pipe complete all as directed

Retuning, filling in, including spreading levelling , watering and wall ramming in laying not exc 25 cm thick complete all as directed.

Removal of surplus soil to a distance exceeding 500 mtrs but not exceeding 1.50 km complete all as directed.

S&F FRP Rectangular Manhole Cover, Capacity 2.5 to 4.0 Ton, Size: 900 X 1200 mm including demolition of old covers of any description complete all as directed Make :Sintex / Fibrocast/ Flortek

S&F factory made precast reinforced cement concrete 1:2:4 type B0 (using 12.5mm garded aggregate),as in cover slabs for drain or manholes etc including necessary formwork and fibre reinforcement as per site requirements all as specified and as directed.

M&L brickwork with sub class B bricks straight or curved on plan exc 6.00 m mean radius built in cement mortar 1:6 including demolition of existing damaged brick work complete all as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 finished even & smooth without using extra cement

M&L preparation of new plastered surfaces and applying two coats of OBD as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT

M&L for preparation of new plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

M&L preparation of old plastered surfaces of walls and applying one coat of OBD as per manufacturers instructions complete all as specified and directed.

M&L preparation of old plastered surfaces of ceiling and applying one coat of OBD as per manufacturers instructions complete all as specified and directed.

M&L preparation of old plastered surfaces of walls and applying two coat of OBD as per manufacturers instructions complete all as specified and directed. Make for item Nos.18 to 20:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT

M&L for preparation of old painted wooden surafces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for preparation of old painted steel/iron surafces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for preparation of old plastered surfaces and applying one coats of weather proof antifungal exterior paint as per manufacturers instructions complete all as specified and directed. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

M&L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat white wash complete all as directed.

M&L non-skid ceramic colour tiles as in floors, area of each tile exc 0.06 sqm but n. exc 0.11 sqm of 7 to 8 mm thick set and jointed in neat cement slurry and pointing in coloured cement laid over and including 15mm thick screed bed in CM 1:4, including demolition of existing tiles alongwith old screed bed complete all as directed.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick in skirting and dado laid over and including 10 mm thick backing coat in CM 1:3, set and jointed with a thin layer of neat cement paste and pointing in coloured cement to match with colour of tiles including demolition of existing tiles alongwith old plaster complete all as directed.

Cleaning storm water open drain by digging out loose soil consisting of dirt, debris, leaves etc from drain and removing and depositing it in a low lying area exc 100 m distance from site, complete all as directed.

M&L for PCC 1:2:4 type B1 in surface channel and drains including demolition of old concrete complete all as directed

M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x22 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 20mm thick screed layer in CM 1:6, including dismantling existing floor tile alongwith screed of any descrption complete all as directed. Make : NAVEEN/SPARTEK/NITCO

M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, as in floors/pavings laid over 50 mm thick sand cushioning layer including dismantling existing floor tile of any descrption complete in all respect and all as specified. Make : NAVEEN/SPARTEK/NITCO

M&L for 75mm thick PCC as in sub base 1:4:8 type D2 using 40mm garded aggregate including demolition of old concrete complete all as specified and directed

Taking down shutters of door/ window n.exc 4 sqm and refixing the same after easing adjusting and also refixing builders hardware as required incluidng renewal of unserviceable screws etc renewal of builders hardware articles of ordered shall be measured and paid as supply rates complete all as directed.

Taking down existing PVC door shutters of any size and tightening loose joints of styles/rails, making good loose hinges etc., and making the shutter fully functional and re-fixing in the same location complete all as directed.

Removal of damaged wooden beading from door/window shutters and refixing of existing bulged wiremesh n,exc 0.5 Sqm in the same position and providing new wooden beading with mutating synthetic enamel paint complete all as directed.

S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as directed

S&F in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250 mm and fixed complete all as directed

S&F in repairs 100 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as directed

S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as directed

S&F in repairs 200 mm long aluminium, anodised or matt finished barrel tower bolts of extruded section complete all as directed

S&F in repairs 125 mm size extruded aluminium alloy handles, fabricated type with plate, matt or anodised finish complete all as directed

S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type with plate, matt or anodised finish complete all as directed

M&L for Welding in repairs not exceeding 2.5 cm in length each and thickness of metal to be welded n.exc 6 mm including cleaning and preparing the surface together and holding the member together complete all as directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading of suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane including hacking out old unserviceable glass/ broken glass panes complete all as directed.

S&F 4 mm thick figured glass, pin headed type and glazing with oil putty and glazing clip in metal frame and second class hard wood beading of suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane including hacking out old unserviceable glass/ broken glass panes complete all as directed.

S & F in repairs Stainless steel curtain rod 25 mm dia and 304 grade of standard thickness complete all as directed.

S&F in repairs Stainless steel Curtain rod brackets 25mm dia complete all as directed

S&F in repairs door closer, hydraulically regulated, aluminium extruded section body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg fixed complete all as directed.

S&F in repairs 40mm dia brass polished cup board knobs fixed with nut screws and washer complete all as directed

S&F in repair bathroom PVC cabinet mirror of size 450 mm x 300 mm x 155 mm complete all as directed. Make :Prayag/Polytuf

S&F in repairs door magnet lock to shutter complete all as directed .

S&F in repairs Venetian blinds vertical type 100mm width with polyester fabric of approved colour & pattern including powder coated aluminium fittings of top rail .weight and nylon button /loops etc fixed complete all as specified and as directed. Make : vista/Levador/Amar

S&F in repairs Multicolor double layered black out fabric roller zebra blinds horizontal type including hanging mechanism water resistant, UV protection for window etc fixed complete all as directed. Make: Vista/Levador/Amar

S&F in repairs nylon net mosquito proof with wire cloth best quality colour complete all as directed

S&F in repairs stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter including replacement of broken wooden beadings , as per requirement complete all as specified and directed.

S&F in repairs Brass cupboard locks heavy duty of size 75mm and 4 levers with duplicate keys complete all as directed.

S&F in repairs stainless steel peg set of 06 hooks fixed with stainless steel screws complete all as directed.

S&F in repairs corner glass shelf 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as directed

S&F in repair floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring of size 140mm (over all length of cover plate) including vulcanised rubber piece complete all as directed.

M&L for 12mm thick Plywood, 7 layered grade BWR type, with screw to timber frame work including taking down the existing boarding complete all as directed.

M&L for 19mm thick particle board exterior grade pre-laminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work including taking down existing particle board complete all as directed.

Taking down chowkats or frames with shutters of area exc 1.5 Sqm but not exc 4.0sqm (without taking off shutters from frames) complete all as directed.

Taking down chowkats or frames with shutters of area n exc 1.5 Sqm each with shutters (without taking off shutters from frames) complete all as directed.

Taking down the shutters of any description exc.1.00sqm but not exc.2.00sqm complete all as directed

S&F M.S frame of size 105 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate etc complete all as specified and as directed.

S&F M.S frame of size 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate etc complete all as specified and as directed.

M&L PCC 1:3:6 type C0 ( using 12.5 mm graded stone aggregate ) as in filling in pressed steel door frames set in CM 1:6 complete all as directed.

M&L PCC 1:2:4 type B0 using 12.5 mm graded aggregate as in bed block of hold fast complete all as directed

S&F solid PVC Door Frame of size 50mm x 47mm, box type, made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F 35mm thick Factory made pressed moulded panelled door of single or multi panel textured masonite moulded door fabricated using well seasoned and chemically treated solid second class hard wood styles, rails and panels made out of tubular core bonded with PF synthetic resin conforming to BWP grade IS: 848. Both faces shall be covered by hot pressing with high density fibre (HDF) of 2.8 to 3 mm thick imported masonite skin. The door's colour, texture design shall be approved by GE complete all as directed.

S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed

S&F stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

M&L for preparation of new painted wooden surfaces of any description not other wise described over 10 cm width & girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, type B-21 anodised and fixed all as directed

S&F aluminum anodized barrel tower bolts of extruded section length of bolt 200mm complete all as directed

S&F extruded aluminum alloy handle fabricated types size 200mm long complete all as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250 mm and fixed complete all as directed

S&F 100 mm size brass butt hinges, extruded brass with mild steel hinge pin bright polished type B-11 complete all as directed.

S&F 300 long brass sliding door bolts with sand or die cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as directed.

S&F 150 mm size brass tower bolts with cast or sheet barrel and rolled or cast bolts complete all as directed.

S&F 150 mm size extruded brass handle fabricated type polished complete all as specified and as directed.

S&F Floor door stopper 150 mm long brass body and tongue with hard drawn steel spring complete all as directed.

Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete all as directed including taking down old steel windows complete all as directed

Supply & fixing of UPVC windows/ventilators with top hung shutters made out of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutters fixed with 5 mm thick plain sheet glass complete all as directed including taking down old steel ventilators all as directed

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165de E-165 complete all as specified including dismantling of existing iron work

M&L for preparation of new steel surface of any description over 10cm width or grith not otherwise described and priming with red oxide zinc chrome primer and finished with two coats of synthetic enamel paint complete in all respect.

M&L Providing and fixing false ceiling with light weight calcuim silicate tiles of spin tone surface textured Aerolite make of size 595x595 mm having 15mm thick dexnsifed micro look edge in true horizontal level suspended on silhouette profile suspension system of grid made from hot dipped G.I. steel section potary stitched double webbed power coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of sixe 33mm x14mm and 0.30mm thick placed at 60cm centre to centre having width of flange 14mm with a 6mm reveal profile,(Black). The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated Galvanized steel of dimension 3.00mm long x(15mmx10mm) x22.5mm and laying false ceiling for services like diffusers grills including cutting making opening for services like diffusers grill light fitting, fixtures smoke detectors including taking down existing damaged ceiling complete completely all as directed.

M&L light shade vitrified ceramic tiles approved shade 10 mm thick (square/rectangular) polished area of each tiles exceeding n.exc 0.36 sqm but floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and 15mm thick screed bed in cement mortar 1:4 for laying of floor tiles including disnantling of existing tiles.

All as per item 90 above but on vertical surfaces over 10mm thick backing coat in CM 1:4

S&F glazed ceramic coloured tiles of size 300 x 600 x 7mm thick in patches in skirting and dado laid over and including 10 mm thick backing coat in CM 1:4, including dismantling of existing tiles, set and jointed in neat cement slurry and pointing in coloured cement to match with colour of tiles complete all as directed.

M&L polishing cutting and grinding to existing terrazzo floor/ skirting including wax polishing complete all as directed.

S&F in repairs brass mortice lock 100mm long vertical type 4 levers fixed to shutter with 2 duplicate keys with handles complete all as directed.

Repairs to leaking bib tap, pillar tap, stop cock, angle cock and gate valve of 15 & 20mm dia by changing spindle as required to complete the defect all as directed.

Removal of air lock/blockage in 15mm/20mm bore GI water tubing, cleaning the pipe and fittings etc and refixing the same in position complete all as directed.

Resecuring loose/ hanging 10Ltr capacity PVC flushing cistern including brackets/ gutties as required including connecting water pipe and flush pipe complete all as directed.

M&L for GI water tubing of 15mm bore 'Medium Grade' with all fittings such as elbow, socket, tee, union and nipples etc, including cutting, threading etc, laid in trenches or fixed to walls complete including taking down unserviceable water tubing complete all as directed.

M&L for GI water tubing of 20mm bore 'Medium Grade' with all fittings such as elbow, socket, tee, union and nipples etc, including cutting, threading etc, laid in trenches or fixed to walls complete including taking down unserviceable water tubing complete all as directed.

M&L for GI water tubing of 25mm bore 'Medium Grade' with all fittings such as elbow, socket, tee, union and nipples etc, including cutting, threading etc, laid in trenches or fixed to walls complete including taking down unserviceable water tubing complete all as directed.

S&F in repairs stainless steel grating of 125mm dia chromium plated grating for nahani traps with or without hole for waste pipe complete all as directed

S&F in repairs 15 mm bore bib taps, cast copper alloy chromium plated long body fancy type with capstan head, screwed down, screwed for iron pipe complete all as directed.

S&F in repairs chromium plated Bib taps, cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete

S&F in repairs 15 mm bore brass, chromium plated, angle cock, screwed for iron pipe complete all as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as directed.

S&F in repair Gun metal, globe or gate valves for 20mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed.

S&F in repair Gun metal, globe or gate valves for 25mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed

S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600 mm long between flanges complete all as directed.

S & F in repair 20mm PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 15mm bore iron pipe and fixed all as specified and directed

S & F in repair 25mm PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 15mm bore iron pipe and fixed all as specified and directed

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white, including plastic seat cover, white, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete fixed all as specified and directed.

S&F in repairs vitreous china squatting pan "orissa" pattern of size 580x440mm white with integral foot rest including provision of P or S trap including connection to flushing pipe and making good to floor complete all as directed. Note :- Demolition of tiles/concrete requested and concreting required for setting trap and making good to floor shall be deemed to included in the quoted rate

Supply and fix in repairs vitreous china wash basin, white, flat back, size 580 x 450 mm incl 32 mm dia PTMT waste coupling, PVC waste pipe incl brackets complete all as specified and as directed

Supply & fix in repairs pillar taps of 15 mm bore fancy type cast copper alloy with capstan heads, chromium plated,screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed

S&F in repairs brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directed Make: F330004CPof Hindware or equivalent in parrware

S&F in repair CP brass 3 in 1 wall mounted mixture with telephone hand shower complete all as directed. Make: Jaquar/Hindware/Parryware

S&F in repair telephone hand shower complete all as directed. Make:Jaquar/Hindware/Parryware

S&F in repair Health faucet,case-copper alloy, chromium plated including all necessary fittings complete all as directed. Make:F160013CP of Hindware or equivalent as approved

M&L cleaning with bleaching powder and removing all scale and dirt etc from water tanks of capacity 500 ltrs and from mouths of circulating pipes etc including writing note with synthetic enamel paint as under : " DATE OF CLEANING " " DUE DATE FOR CLEANING " complete all as directed.

M&L cleaning with bleaching powder and removing all scale and dirt etc from water tanks of capacity 1000 ltrs and from mouths of circulating pipes etc including writing note with synthetic enamel paint as under : " DATE OF CLEANING " " DUE DATE FOR CLEANING " complete all as directed.

S&F in repairs Urinal sensor, solonet Valve, Battery box along with batteries complete all as directed. Make:- Hindware or equivalent

S&F in repairs WHB sensor, solonet Valve, Battery box along with batteries complete all as directed. Make:-Jaquar or equivalent

Taking down of existing concealed type flushing cistern and repair and replacement of wall cock, syphon and anglecock and refixing in the same position complete all as directed.

Supply and fix in repairs of brass chromium plated towel rack 600 mm long with lower hangers, brass screws and wooden/plastic cleats complete all as specified and as directed. Make: CAT No F880008 of HINDWARE or equivalent in PARRYWARE/CERA as approved

Supply and fix in repairs toilet paper holder with flap, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed. Make: CAT No F880003 of HINDWARE or equivalent in PARRYWARE/ CERA as approved

M&L for 20 mm thick black grainite (of any type) work in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing, rounding of edges, cutting in oval rectangular, square etc shape for fixing of wash basin including making good and dismantling of old stone slabs complete all as directed.

S&F in repairs wash basin size 550 x425 x195 mm complete all as directed. Make: Jaquar Code- FLS-WHT 5701 or Equivalent in Hindware/ Marc

S&F C.P waste coupling half threaded complete all as directed. Make: Jaquar Code: ALD 709 or Equivalent in Hindware/ Marc

S&F in repair 32 mm brass CP bottle trap for wash basins complete all as directed Make :Jaquar, Code ALD 769 or Equivalent in Hindware/Marc

S&F in repairs pillar cock (sensor taps) complete all as directed. Make: Parryware code T7185A1 or Equivalent in Jaquar/Hindware

S&F in repair couple closet WC of size 810 x 400 x 730 mm complete all as directed. Make:- Hindware ELEMENT-92082 or equivalent in Jaquar/ Parryware

S&F in repairs two way CP brass bib cock complete all as directed Make- Jaquar, code-ARI-39041 or Equivalent in Hindware/ Marc

S&F in repair electronic urinal of size 425x 410 x 645mm neutral integrated AC/DC with power source complete all as directed Make: Parryware code C0588 or Equivalent in Jaquar /Hindware

S&F factory made PCC kerb stone of size 600x250x100mm thick as in sides of paths, jointed in CM 1:4,including dismantling of old stones complete all as directed

M&L for cutting of branches of trees leaning over roofs of buildings, removing vegetation over roof, including grubbing upto roots, killing roots using foaming root killer, filling the cavities formed with PCC 1:2:4 type B0 using 12.5mm graded aggregate complete including making good disturbed surafces all as directed.

M&L for stainless steel emblem of size as decided by the accepting officer made out of 1.2mm thick SS 304 grade sheet matt finish including fixing as per manufacturer's instruction complete all as specified and design and pattern of letters shall be decided

M&L for Stainless steel letters of size 59cmx30cm made out of 1.2mm thick SS 304 grade sheet matt finish as in sign boards including fixing as per manufacturer's instruction complete all as specified and design and pattern of letters shall be decided by the accepting officer

M&L for 18-20mm thick Granite (Lakha red) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismntling old granite slab complete all as specified and as directed

S&F in repairs Solar road stud of size 125x125x25 mm made out of toughened aluminium alloy body with polycarbonate top cover,IP 65 protection against water ingress,having 03 No super bright LEDs on each side,coloured reflective LED cover,inbuilt rechargeable battery,solar panel,visibility upto 800mtr,automatically turns on at night and adverse weather conditions and fixed with epoxy chemical cement and hardener,complete all as specified Make : DarkEye / 3M India / Green light / TATA BP

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates), nexc 100 mm thick as in levelling course over roofs including demolition of cement concrete complete all as specified and as directed

(a) M&L for removal of existing water proofing treatment along with screed complete and cleaning the surface, removing dust, dirt, loose particles and unsound substrate and providing 15mm thick cement screed (1:4) mixed with Dr Fixit water proof compound as per manufacturer's direction. (b) Applying primer coat with solvent based bitumen primer @ 0.30 ltr/ Sqm (c) Align Dr Fixit/STP torch shield water proofing 3mm thick membrane weighing not less than 3.50 Kg/Sqm using gas burner to heat substrate, pressing firmly from lower end to upper end with 100mm over lap. (d) Heat both overlap with round trowel to seal over lap excess compound smoothened, pressed into seam using hot trowel. (e) Seal edges well into grooves & protect with CM 1:2 (f) Applying two coats of aluminium paint over APP membrane complete.

Ravi Enterprises

M.R.ENTERPRISES