Construction of Community Hall at Sunjwan Lower Block Satwari.

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil 80% and :Ordinary Rock 20%. Including all lead lift and carriage complete

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. All kinds of soil. Including all lead lift and carriage complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).Including all lead lift and carriage complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Including all lead lift and carriage complete

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).Including all lead lift and carriage complete

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).Including all lead lift and carriage complete

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). Including all lead lift and carriage complete

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms

Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bresssumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for. Edges of slabs and breaks in floors and walls Under 20 cm wide

Centering and shuttering including strutting, propping etc. and removal of form for: Weather shades, chajjas, corbels etc. including edges

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-mechnically treated bars of grade Fe 500 D or more

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.Including all lead lift and carriage complete

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth & s.st including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) superstructure above plinth level upto floor five level.Including all lead lift and carriage complete

Providing and laying vertified tiles in floors with different sizes 80 x 80 cm ( thickness to be specified by the manufacturers) with water absoprtion less than 0.08% and conforming to IS: 15622 of approved make, in all colors and shades laid on 20 mm thick cement mortar 1:4 ( 1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc complete.Including all lead lift and carriage complete

Providing and laying ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer ) of 1st quality conforming to IS : 15622 of approved make, laid on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc, complete in colors such as all colors, shades except white, ivory, fume red brown. Including all lead lift and carriage complete

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, rises of steps dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm , including pointing in white cement mixed with pigement of matching shade complete. Including all lead lift and carriage complete

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand). Including all lead lift and carriage complete

15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand). Including all lead lift and carriage complete

Providing and fixing circular/hexagonal cast iron box for ceiling fan clamp, of internal dia 140 mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamps shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Painting top of roofs with bitumen of approved quality at 17 kg per 10sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of grade VG-10

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0.Including all lead lift and carriage complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.Including all lead lift and carriage complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood

Providing and fixing 35 mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelle and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick. Plain particle board flat pressed, 3 layers or graded wood particle board medium density grade I, IS: 3087 marked

Providing and fixing 35 mm glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class kail wood

Providing and fixing 35mm wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class Kail wood

Providing and fixing G.I pipes complete G.I fittings and clamps including cutting and making the walls etc. internal work exposed on wall. 15 mm dia nominal bore (medium)

Providing and fixing G.I pipes complete G.I fittings and clamps including cutting and making the walls etc. internal work exposed on wall. 20 mm dia nominal bore(medium)

Providing and fixing G.I union in G.I pipes including cutting and threading the pipes and making long screws etc. complete (new work) 15mm dia nominal bore(medium)

Providing and fixing G.I union in G.I pipes including cutting and threading the pipes and making long screws etc. complete (new work) 20mm dia nominal bore (medium)

Providing and fixing white vitrous china pedestal type water closet ( European type wc pan) with seat and lid ,10 litre low level pipe with PVC flushing cistern including flush type with manually controlled device conforming to IS:7231 with all fittings and fixures, complete including cutting and making good the walls and floors where ever required.W.C pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitrous china Flat back or wall corner type lipped front urinal basin of 430x260x35mm and 340x410x265mmsizes respectively with automatic flushing cistern with standard flush pipe and C.P brass spreaders with brass union and G.I Clamps complete including painting of fittings and brackets ,cutting and making good the wall and floor wherev ever required one urinal basin with 5 liter whitr P.V.C Automatic Flushing Cistern.

Providing and fixing wash basin with C.I /M.S brackets 15mm C.P bras pillar taps , 32mm C.P bras waste of standard pattern , including Painting of fittings and brackets , cutting and making the good walls wherever . white vitrerous China . size wash basin 630x450mm with pair of 15mm c.p brass pillar tap

Providing and fixing stainless steel A ISI 304 (1818) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40 mm. Including painting of fitting and brackets. cutting and making the walls wherever required 610x510mm bowl below 200mm depth including all types of fitting

Providing and fixing 600x450mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board .ground fixed to wooden cleats with C.P bras screws and washer complete

Providing and fixing ball valve ( brass) of approved quality complete high or low pressure with plastic floats 15mm dia nominal bore

Providing and fixing ball valve ( brass) of approved quality complete high or low pressure with plastic floats 20 mm dia nominal bore

Providing and fixing soap dish of approved quality

Providing and fixing PTMP towel ring trapezoidal shape 215mm long 200 mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour , weighing not less than 80 gram.

Providing and fixing PTMT grating of approved grating of approved quality and colour . circular type. 100 mm dia without waste pipe

Providing and fixing PTMT grating of approved grating of approved quality and colour . circular type. 125mm nominal dia with 25mm waste hole

Providing and fixing of C.P brass shower rose with 15 or 20 mm inlet 100 mm diameter

Providing and fixing cp bib cock of approved quality 15mm nominal bore. Long nose

Providing and fixing cp bib cock of approved quality 15mm nominal bore. Short nose

Providing and fixing C.P brass angle valve For basin mixer and gyser points of approved make confirming to IS:8931. 15mm nominal bore complete job .

Providing and fixing 110mm dia. PVC waste water / sewerage pipe of 4 kg pressure per sqm of supreme / prince/ finoeix make prakash surya

Providing and fixing in position complete PVC floor trap of supreme / prince make 110/75mm dia.

P/Fixing plain PVC bend of 110 mm dia

P/Fixing PVC soil waste pipe and vent pipes 75mm dia

P/Fixing PVC connections (hot and cold) for gyser unions complete.

Constructing brick masonry manhole in cement motor 1:4 ( 1 cement : 4 coarse sand ) RCC top slab with 1:1.5:3 mix( 1 cement:1.5 coarse sand (zone III):3 graded stone aggregrate 20 mm nominal size) foundation concrete 1:4:8 mix ( 1 cement:4 coarse sand (zone III):8 graded stone aggregrate 40 mm nominal size) inside plastering 12mm thick with cement mortar 1:3 mix ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement:2 coarse sand :4 graded stone aggregrate 20 mm nominal size) finished with a floating coat neat complete as per standard design. Inside size 90x80 cm and 45cm deep including C.I cover with frame (light duty) 455 x 10 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 Kg and weight of frame 15 Kg):. With F.P.S bricks class desgnation. 75. Including all leads , lifts and all types of carriages

Providing and fixing unplasticised PVC connection pipe with brass union 30cm length 15mm nominal bore

Providing and fixing Motor pump of ½ HP of sharp ,bajaj,or equivalent make including fittings (complete job)

Providing and fixing of 600x120x5 mm glass shelf with edges round off supported on aluminium angle frame with cp brass brackets and guard rail complete fixed with 40 mm long screws etc

Providing and fixing toilet paper holder vitrous china Cp brass

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and color 450 mm long towel rail with total length of 495 mm ,78 mm wide and effective height 88 mm , weighing not less than 170 gms.

Providing and fixing PVC waste pipe for sink or wash basin Including PVC waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing 8 mm dia cp/ss jet with flexible tube upto 1 mtr long with ss triangular plate to eoropean type WC of aaproved quality and make as desired by engineer in charge.

Providing and fixing gI inlet conection for flush pipe connecting with Wc pan.

Providing and fixing MS holder bat clamp of total bracket length 580 mm of approved shape and design. Complete job

Providing and fixing cp brass extension nipple of approved brand and make as per direction of engineer in charge.

Cutting holes up to 30x30 cm in walls including making good the same with common burnt clay bricks

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing GI pipe etc

Wiring for light point/fan point/exhaust point/with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class pvc conduit with paino type switch ,phenolic,laminated sheet,suitable size ms box, and earthing the point with 1.5 sq mm ,FRLS pvc insulated copper conductor sigle core cable etc required. (wire make ISI marked havells/anchor/HPl) Group ( C)

Wiring for circuit /sub main wiring along with earth wire with the following sizes of FRLS PVC isulated copper conductor ,single core cable,in surface /recessed medium class PVC conduit as required.( Wire make ISI markedShalimar/ Havells/Anchor/HPL. 2x1.5+1x1 sq mm

Wiring for circuit /sub main wiring along with earth wire with the following sizes of FRLS PVC isulated copper conductor ,single core cable,in surface /recessed medium class PVC conduit as required.( Wire make ISI markedShalimar/ Havells/Anchor/HPL. 2x2.5+1x2.5 sq m

Wiring for circuit /sub main wiring along with earth wire with the following sizes of FRLS PVC isulated copper conductor ,single core cable,in surface /recessed medium class PVC conduit as required.( Wire make ISI markedShalimar/ Havells/Anchor/HPL. 4x4+2x4 sq m

Supplying and fixing of metal box of following size on the surface /recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 200 x125x60 mm deep

Supplying and fixing of metal box of following size on the surface /recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 200x250x100 mm deep

Supply and fixing paino type switch on the existing switch box or cover including connections as required 15/16 AMP Make havells/HPL/Anchor(power switch)

Supply and fixing 6 pin 15/16 amp socket outlet on the existing switch box or cover including connections as required (power socket) Make havells/HPL/Anchor

Supply and fixing 5/6 amp piano type switch on the existing switch box or cover including connection required.(Make Havells/HPL/Anchor)

Supply and fixing 3 pin 5/6 amp socket outlet on the existing switch box or cover including connection as required. (Make Havells/HPL/anchor)

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubic panel board including drilling holes in cubic panel ,making connections as required including enclose if required.Make Havells/HPL/Crompton/IA/Hager) 100 AMP 16 KA TP (Main switch)

Earthing with copper plate 600x600x3 mm thick including accessories and providing masonary enclosure with coverplate having locking arrangement and watering pipe of 2.7 mtr long with charcoal / coke and salt as required.complete job

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required

Providing and fixing of exhaust fan with all connections required. Complete job

Providing and fixing ceiling fan including regulator of approved ISI make as per required (havells/Anchor)

Supply and fixing 5 A to 32 A rating ,240/415 v,10 Ka C curve ,miniature circuit breakable suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commisioning etc as required . Single pole

Supply and fixing 5 A to 32 A rating ,240/415 v,10 Ka C curve ,miniature circuit breakable suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commisioning etc as required . Single pole and neutral

Supplying and fixing following way, and pole plain /horizontal typesheet steel MCB distribution board,415 V on surface/recess, complete with tinned copper bus bar,neutral bus bar,earth bar.din bar,interconnections,powder painted as required.6 way ,Double door 415 v ,3 phase and neutral DD

Supply of LED battens 4 feet 18 to 22 watt ,230 volts LED batten type tube light fitting complete job. Make surya/havells/bajaj/HPL/phillips

P/Fixing of door bell ding dong type. Make Anchor/Bajaj

P/Fixing of following ratings 230 volts energy saver led lamps. (Make Phillips/havells/bajaj/surya/HPL) A. 8 to 12 watt led lamp

Supplying and fixing 25 mm sq 2 core aluminium cable as required

Making khuras 45 by 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 over pvc sheet 1 mm by 1 mm by 400 micron finished with 12 mm cement plaster 1:3 and a coat of neat cement ,rounding the edges and making and finishing the outlet complete.

Providing gola 75x 75 mm in 1 cement :2 course sand:4 stone aggregate 10 mm down gauge including finishing with 1cement :3 fine sand mortar in 75 by 75 mm deep chase Including all lead lift and carriage complete

Providing and laying cement concrete in 1:3:6 using 20 mm aggregate .all works upto plinth level. Including all lead lift and carriage complete

SAMI AYUB KHAWAJA

liaquat ali

M/S Mahir Construction Company