Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.2 LAccepted-AOC 179 URBAN ESTATE RAM TIRATH ROAD NR GURUDAWARA DARSHAN SINGH AMRITSAR PUNJAB 143001 | AMRITSAR | PUNJAB | 143001 | L1 | Accepted-AOC lowest | |
| 2 | L2₹12.9 L+₹1.7 L (15.2%)Rejected-Finance GP RAM COLONY AMRITSAR JALANDHAR 144103 | AMRITSAR | AMRITSAR | PUNJAB | 144103 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹13.5 L+₹2.3 L (20.8%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹14.9 L+₹3.7 L (33.6%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹15.0 L+₹3.8 L (34.0%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹15.0 L
EMD Value
₹29,980
Closing Date
20 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AIR FORCE STATION AMRITSAR
ASST. GARRISON ENGINEER (I) AIR FORCE STATION AMRITSAR- 143001
PERIODICAL SERVICES FOR VARIOUS MD/OTM ACCN AT AIR FORCE STATION AMRITSAR UNDER AGE (I) AF AMRITSAR
2023_MES_594536_1
AGE (I) AF/ASR/T-11/2023-2024
Open Tender
Civil Works
Item Rate
270 days
AGE (I) AIR FORCE STATION AMRITSAR
CLASS E AND CATEGORY a(i)
8 documents required · 8 mandatory
₹500
Yes
AGE (I) AIR FORCE AMRITSAR
₹29,980
Yes
30 Jun 2023
11 May 2023
23 May 2023
11 May 2023
20 May 2023
13 May 2023
Amount
M&L for Preparation of plastered or un-plastered surface or removal of existing treatment by scrappinf of walls, ceiling, chajjas, fins,fascias, parapets etc shall be done by using mechanical sander with internal dust extraction system for clean environment certificate by the manufacturer. After preparation of surface, approval shall be obtained from Engineer-in-Charge before applying primer and further treatment / coat including applying one coat of Oil bound distemper by mechanical spray machine gun complete all as specified and direceted.
M&L for Preparation of plastered or un-plastered surface or removal of existing treatment by scrappinf of walls, ceiling, chajjas, fins,fascias, parapets etc shall be done by using mechanical sander with internal dust extraction system for clean environment certificate by the manufacturer. After preparation of surface, approval shall be obtained from Engineer-in-Charge before applying primer and further treatment / coat including applying two coat of exterior grade emulsion paint by mechanical spray machine gun complete all as specified and direceted.
M&L for Preparation of plastered or un-plastered surface or removal of existing treatment by scrappinf of walls, ceiling, chajjas, fins,fascias, parapets etc shall be done by using mechanical sander with internal dust extraction system for clean environment certificate by the manufacturer. After preparation of surface, approval shall be obtained from Engineer-in-Charge before applying primer and further treatment / coat including applying two coat of interior grade emulsion paint by mechanical spray machine gun complete all as specified and direceted.
Taking down cement plaster and decayed concrete if any upto double storey buildings from roof projection, chajja, beam, concrete surface of any description and making good the decayed portion with CM 1:3 or with PCC 1:2:4 using form work if any and finally finishing the surface with 15mm thick cement plaster 1:3 to match the existing surface all as specified and directed
Prepration of new plastered surfaces if any upto double storey buildings of roof projection, chajja, beam, concrete surface of any description and applying two coat cement base paint over a coat of cement primer including prepration of surface complete all as specified and direceted.
Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coat of white wash on old decorated surface wall complete all as specified and direceted.
Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying two coat of white wash on old decorated surface wall complete all as specified and direceted.
Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coat of white wash on ceiling complete all as specified and direceted.
Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying two coat of white wash on ceiling complete all as specified and direceted.
Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coat of oil bpund distemper on wall complete all as specified and direceted.
Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc with 1mm thick wall putty and applying two coat oil bound distemper on walls complete all as specified and direceted.
Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coats of cement based paint on wall upto height 12 mtr.
Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying two coats of cement based paint on wall upto height 12 mtr.
Preparation of old painted wooden surfacs of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of old painted wooden surfacs of any description not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint complete all as specified and directed.
Preparation of old painted steel surfacs of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of old painted steel surfacs of any description not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and smooth without using extra cement and applying two coats of oil bound distemper over a coat of primer on plastered surfaces including taking down complete all as spd
M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and smooth without using extra cement and applying three coats of white wash on wall plastered surfaces including taking down complete all as spd
M&L 5mm thick cement plastering on ceiling in CM 1:3 and applying three coats of white wash plastered surfaces including taking down complete all as spd
M&L 15mm thick cement plastering on fair faces in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement but with using water proofing compound including taking down Complete all as spc upto height 12 mtr Note : WPC shall be measured and paid separately.
M&L preparation of new plaster surface and applying two coats of cement base paint over one coat of primer all as spd upto height 12 mtr.
Applying one coat of exterior water emulsion paint on old PCC kerb stone surface including making good to the surface of kerb stone by applying and rendering joints with CM 1:4 complete all as specified and directed by Engineer-in-charge .
M&L for Preparation of old platered or unplastered old decorated surfaces of wall by brooming down with steel brushing,scraping down smoke soot's moulds moss and efflorescent salts trading oil greasy sport etc and applying a coat of exterior water emulsion paint (Appex) all as specified and direceted by Engr-In-Charge.
M&L for Preparation of old platered or unplastered old decorated surfaces of wall by brooming down with steel brushing,scraping down smoke soot's moulds moss and efflorescent salts trading oil greasy sport etc and applying two coat of exterior water emulsion paint (Appex) all as specified and direceted by Engr-In-Charge.
M&L for preparing duly Complete removal of existing treatment of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efflorescence salts, trading oil greasy spots etc and applying two coat of interior grade emulsion paint over a coat of 1mm thick acrylic putty of color approved by engrs-in-charge complete all as specified & directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in repair in steel frame or in wooden frame of door/ window with MS flat with screw or wooden beading where required and match the surface complete as specified and directed.
Sheet glass 3mm thick ordinary quality and glazing with oil putty in sqaures in n.exc 0.5 sqm in each panes including taking out of old broken glass ( any thickness,size,quality or description ) from wooden or steel frames with putty or fixed with beads, punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed
Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats and removing to store as spd
Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminate wood grain printed PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.
S&F 30mm thick factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded prelaminate wood grain printed PVC sheet 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beadinused for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of prelaminate wood grain printed PVC sheet to e fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.
S&F 30mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides Complete all as specified and directed.
S&F glazed and skeleton shutters 35mm thick of 2nd class hard wood open rebated and prepared to receive gauge & glass etc with edge of sash bar and number edges of framing plain chamfered beads for securing glass etc size of number of shutters as spd SSR Part-I & section 8 clause 8.23 & (b) complete all as spd
S&F butt hinges med weight cold rolled mild steel 100mm size
S&F in repair 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or ectruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as specified and directed.
S&F Aluminium anodized barel tower bolt of extrud sec 150mm long Isi marked
S&F alum alloyed handle fabricated type anodized of size 150 mm long
S&F in repair 150mm floor door stopper of aluminimum alloy body and tongue anodized with hard drawn steel spring
S&F 300mm, mild steel ordinary rat tail rod pattern prings,including roller and roller plate complete. Note : Repair required on steel door frame, welding to be carried out or necessary alternative arrangements tobe done..
S&F in repairs door closer hydraulicaly regulated, aluminium(Die cast ) body Designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed
Petty repair to existing in built Aluminium Door , locks, hinges incl necessary making the lock/Glass/ adjusting shutter complete serviceable all as per existing pattern as directed by Engineer-in-Charge incl provision of duplicate keys as required.
M&L for two coat synthetic enamel paint over a coat red pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed
S & F rotational moulded polytheylene triple layered white water storage tanks of capacity 500 Litres(cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank and 20mm dia brass float valve with brass rod complete all as spd.
S&F 1000 litres capacity rotational moulded polyethylene water storage tanks ISI marked three layers construction (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tank completed all as specified and directed.
S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)
S&F in repair, 10 Litre capacity PVC valveless, syphonic action type,flushing cistern low level ,white, with inlet,ball valve, float ,flush pipe and handle including brackets, 32mm bore PVC flush pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed.
S&F in repair 15mm bib cock,cast copper alloy chromium plated fancy type15mm bore with capstan handle,screwed down,screwed from iron pipe or for brass ferrule, complete all as specified and as directed.
S&F 15 mm bore stop valves/ angle valves fancy type chromium plated screwed dwon high pressure with cruth or butterfly handle for 15 mm dia iron pipe fixed in repairs complete all as directed.
S&F in repair Pillar taps, cast copper alloy but fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
Coupling of PTMT half or full threaded 32 mm dia for kitchen sink fixed in repairs complete all as specified and directed.
Dismantling of CI/PVC pipe of 75/100mm dia fixed with cement joint.
S&F PVC (SWR)pipes 110mm dia in any length with rubber ring joint fixed to wall/floor complete all as specified and directed.
S&F PVC (SWR)bends 110mm dia, in any radius, complete all as specified and directed.
S&F CP brass towel railD type 60 Cm long and 20mm dia type fixed to wall with screw and plastic cleats all as spd and directed by Engr-in-Charge
Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc.
M&L for Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in steps, jambs, pillars, window-cills, cooking platforms including making hole for gas pipe where ew required and like in cement mortar (1:4) 20 mm thick screed bed or bedding layer for laying floor finishe including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, cutting and mirror polishing and 20 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land complete all as specified and directed.
M&L for Virified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured ,light shade cement to match including 15 mm thick screed bed in CM 1:6 all as specified.
M&L for ceramic glazed coloured tiles of size 350x250x7mm/ 450x350x7mm thick joint free on and incl 10mm thick screed bede in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of well as in skirting/dado complete.
M&L for non skid dark/ coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 complete all as spc.
S&F in repair Stainless steel plate rack of size 90 cm x 90 cm with 1 mm thick stainless steel sheet fixed complete all as specified and directed.
S&F incl taking up and down GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed
S&F incl taking up and down GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed
S&F stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe to pipe overall size 915mm x 420mm with bowl size 410mm x 330mm x 160mm with and including PVC waste pipe and CP waste coupling 32 mm and making good to disturbed surfaces fixed as in repair, complete all as specified and directed.
Demolition of cement concrete in ground floor & paving n.exc 15cm above ground level complete all as specified as directed
M&L for cement cocnrete type B-1 (1:2:4) (20mm graded aggregate) as in plinth protection as thickiness of 50mm without using extra cement complete all as specified as directed
M&L for vertified chequered tiles 30 cm x 30cm x 8-10 mm thick with grey cement and no pigment machine pressed, set joined and pointed in neat cement slurry in roofs including 15 mm thick screed bed or bedding layer for laying tiles in CM 1:4 complete all as specified and directed.
M & L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base complete all as specified and directed.
Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed .
M&L Brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius , built in CM 1:4 complete all as specified and directed .
Preparation of old painted wooden surfacs of any description not otherwise described over 10 cm width or grith and applying two coat of French polish Texture paint, color/pattern approved by Engrs-I-Charge complete all as specified and directed.
Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.
AAR KAY BEE ENTERPRISES
H.B AND CO.
B S TRADERS
G S ENTERPRISES
M/S SIMRAN WALIA ENTERPRISES
kapoor and co
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .