SPECIAL REPAIR TO OR LIVING ACCN AT SUKNA MIL STN UNDER GE SUKNA

Amount

Dismantling timber scantlings 40 sq. cm and over in section, in any position like trusses, rafters, purlins etc, complete all as specified and as directed.

Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutters from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc, also including disposing off the retrieved debris outsite the premises, complete all as specified and as directed.

Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutters from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc, also including disposing off the debris outsite the premises, complete all as specified and as directed.

Demolition of brick work or rubbled stone masonry including all quoins, arches , pillars etc built in cement mortar including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

M&L for Brickwork with Sub class 'B' old size bricks of class designation 75 (i.e average compressive strength 75 Kg / cm2), straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

All as per item No 5 here-in above but using old useable bricks (after removal of mortar and cleaning of the old useable bricks) retrieved from item No. 4.00 herein before.

M&L for brick work with Sub-class 'B' Old size of class designation 75 (i.e of average compressive strength 75 Kg/cm2 ) straight or curved on plan to any radius as in half brick thick walls, built in CM 1:4, complete all as specified and as directed.

All as per item No 7 here-in above but using old useable bricks (after removal of mortar and cleaning of the old useable bricks) retrieved from item No. 4.00 herein before.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site outside the premises, complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:6) on the surfaces of brick work or concrete, finsihed even and smooth (without using extra cement), complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 mixed with W.P.C on the surfaces of brick or concrete, finished even and smooth without using extra cement, complete all as specified and as directed. Note:- W.P.C shall be measured and paid for seperately as " supply only".

Supply only liquid water proofing compound, complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description as in slabs, beams, lintels etc & in any other position not otherwise specifically provided for including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

M&L for reinforced cement concrete (1:11/2:3) type A-1 (using 20 mm graded stone aggrgates ) as in Beams, cantilevers, bressumers, lintels over 1.5 metre span, complete all as specified and directed. Note: Reinforcement and Form work shall be measured and paid for seperately.

M&L for reinforced cement concrete (1:11/2:3) type A-1 (using 20 mm graded stone aggrgates) as in slabs supported on walls, beams and and columns in floors, roofs, landings, balconies, canopies, deck slabs, in shelves, kitchen platform/slab and the like, complete all as specified and as directed. Note: Reinforcement and Form work shall be measured and paid for seperately.

Use and waste of formwork to soffits of suspected slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizonal or slopping) for rough finished flat surfaces of concrete, complete all as specified and as directed.

Use and waste of formwork to Beams, cantillevers, bressumers, lintels, shelves and similar items for rough finished flat surface of concrete, complete all as specified and as directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide, sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished flat concrete surfaces, complete all as specified and as directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc, complete all as specified and as directed.

All as per item No 19 above but 8mm dia TMT bars.

M&L TMT bars 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and as directed.

Dimantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverings including ridges, valley gutter etc, complete all as specified and as directed.

S&F pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, as in roof covering, cladding to wall etc, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed.

S&F pre-painted colored plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer,as in roof covering, cladding to wall, ridges, valley gutter etc, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed.

S&F steel work in tubular trusses, purlins, rafters, Fan Hook & similar work including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, also including necessary welding etc and applying one shop coat of Zinc Chrolomate primer after prepation of the surfaces, complete all as specified and as directed.

S&F Mild Steel plates (plain or chequred) conforming to Fe 410W(Gde-E-250), quality 'B', square cut or notched (ordinary and counter sunk), forming holes with reveted,bolted or welded attachment, complete all as specified and as directed.

S&F mild steel screw bolts (machine made) of 16 to 20mm dia & length exc 22.5cm but n.exc 30cm, with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed.

S&F factory made 1.25 mm thick pressed steel frame of size 165 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate etc, applying one shop coat of Zinc Chromate primer after prepation of the surfaces, complete all as specified and as directed. Note :- Hinges shall be paid for separately.

S&F Factory made 30mm thick flush shutter solid core construction with Medium Density Fibre Board Core, Exterior Grade, commercial type on both sides including provision of 4mm thick 2nd class hard wood edging to the exposed edges of the shutter, complete all as specified and as directed.

S&F Factory made wire gauged Solid Panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling shall be of wire gauze, the wire gauze shall be wrapped on an additional square 8mm MS Solid tube and this tube shall be welded to MS tubes, the wire gauge shall be stretched to tighten firmly, all as shown on page No 159 of SSR Part-II, complete all as specified and as directed. Note : Wire gauge shall be measured and paid for separately.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail, on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as shown on drawing on Srl Page No 156 of SSR Part-II, complete all as specified and as directed.

S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, all as shown in drg for SI No. 8095 on Ser Page No. 160 in SSR-2010 (Part-II), complete all as specified and as directed.

Taking down steel window & ventilator, including cutting holes for removing the lugs etc, also disposing off the debris outside the premises, complete all as specified and as directed.

S & F factory made steel windows with side hung shutters including box type hinges with steel handle, and peg stay, complete with glazing bars, dovetaild or welded, including application of one shop of Zinc Chromate primer after preparation of the surfaces, complete all as specified and directed.

All as per item No 34 above but steel windows without glazing bars.

S&F Factory made, steel ventilator with top hung shutter including hinges, steel peg stay, also including application of one shop coat of Zinc Chromate primer after preparation of the surfaces, complete all as specified and directed.

M&L for the Framed work such as framed guard bars, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and as directed.

Dismantling wrought iron as in rafters, purlins, guard bars, grills etc or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F 3mm thick sheet glass of ordinary quality and glazing with & including oil putty for steel surrounds or with wooden beading for wooden joinery (cost of wooden beads included in wooden joinery), in squares n exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with and including stainles steel wire staples etc, complete all as specified and as directed.

M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of 3:1, complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled, mild steel, complete all as specified and as directed

S&F 150 mm size aluminium handle, cast type, anodised, complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt 150 mm long of extruded section, complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and as directed.

S&F Floor door stopper (Overall length of cover plate 140mm) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed.

S&F mild steel 150mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L for Preparation of steel & iron surfaces duly applied the primer in the workshop of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint, complete all as specified and as directed.

S&F hold-fasts, wall ties, hooks for hanging fans; plain angle cleats for securing purlins to steel trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290; Gde-E-165, complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets and existing frame work also, complete all as specified and as directed.

S&F of GI frame work (size of grid 605mm x 605mm) for seamless ceiling comprising GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, Provision of Hangers 4 mm dia. G.I. (upto 1800mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and as directed.

S & F 4mm thick Non-asbestos fibre cement building boards (4mm thick pre-painted designed type E-Board) to GI frame work with screws in ceiling (flat and/or slopping) and in jointless finish with & including joining compound and tape as per manufacturer instructions, complete all as specified and as directed. Notes :- (i) The board shall be confirming to IS-14862 and shall be manufactured from the homogeneious mixture of cement, quartz and cellulose and shall be curred with high pressure steam using auto claving process. (ii) Unless otherwise specified in these tender documents, the boards shall of make, colour and pattern as approved by the GE. (iii) The quoted rates against the above item shall also be deemed to include for applying two coats of oil bound distemper to the exposed surfaces of the board.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square / rectangular) of approved size, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles of size 300mmx 450mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick screed bed backing coat in CM 1:4, complete all as specified and as directed.

S&F in repairs, vitreous china wash basin, 1st quality, white, flat back, size 550mm x 400mm excluding taps but including provision of 32 mm bore brass chromium plated waste fittings, 32mm bore PVC waste pipe, MS brackets, complete all as specified and as directed.

S&F in repairs Vitreous China Wash Down Water closet (Pedestal Pattern) 1st quality, white (excluding flushing cistern & flush pipe) including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel CP or aluminised huiging device, making connections, complete all as specified and as directed.

S&F in repairs, vitreous china, 1st quality, squatting pan, Orrisa pattern of size 580 X 440mm, white with integral foot rests, 'P' trap including making connection to trap, flush pipe, anti-syphonage pipe etc and also including provision of lime conctere bedding, complete all as specified and directed.

S&F in repairs PVC valveless, double syphonic action type, flushing cistern, low level of 10 Litres capacity, white, with and including inlet, ball valve, float, 32mm dia flush pipe of polyethylane of low or high density or PVC, flushing bend & handles, also including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet & making connections, complete all as specified and as directed.

S & F in repairs angle valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore, including provision of GI nipple & socket, complete all as specified and as directed.

S&F in repairs stop valves, fancy type, cast copper alloy, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified and as directed.

S&F in repairs bib tap, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and as directed

S&F in repairs Pillar taps, fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and as directed.

S&F in repairs PVC connection of 450 mm length including brass nuts, complete all as specified and as directed.

S&F grating doom, 100mm dia of PTMT (minimum weight 100gms), complete all as specified and as directed.

S&F in repairs tubular towel rail, 20mm dia, D type, brass chrormium plated, 600mm long between flanges, complete all as specified and as directed.

Taking down 15mm bore steel tubing & connections, complete all as specified and as directed.

All as per item No 68 above but 20 mm bore.

S&F 15mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed partly on the surfaces and partly concealed in the walls & ceiling or laid in floors, also including cutting chases of the required size and making good the same after fixing of the pipes in CM 1:3 to match with the adjoining surfaces, complete all as specified and as directed.

All as per item No 70 above but 20 mm bore pipes.

Taking down PVC SWR Pipes (any size or pattern) including all fittings, heads, shoes etc, complete all as specified and as directed.

S & F 110 mm bore uPVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, complete all as specified and directed. Note :- Quoted rates shall also be deemed to include for cutting of the holes where required/ directed and making good the same in CM 1:3 to match with the existing surfaces.

S & F 75 mm bore uPVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, complete all as specified and directed. Note :- Quoted rates shall also be deemed to include for cutting of the holes where required/ directed and making good the same in CM 1:3 to match with the existing surfaces.

S&F 110mm bore uPVC (SWR) bends (any radius), with and including rubber ring joints, complete all as specified and directed.

S & F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms), complete all as specified and directed.

S&F 75mm bore uPVC (SWR) bends (any radius), with and including rubber ring joints, complete all as specified and directed.

Dismantling water tanks 1000 litres capacity including disconnecting the connections, complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 1000 Litres capacity, ISI marked, (cylindrical vertical type double-layered) with closed top including inlet,outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoisted in position, complete all as specified and as directed.

S&F Ball brass valves, high pressure, with polythene float and flyment complete screwed for iron pipe of 20mm bore, complete all as specified and as directed.

S&F in repair 20mm dia Harrison Rails (Curtain Rails), mild steel, chromium plated, with and including suitable CP brackets, stops, rollers etc, complete all as specified and as directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank, hold-fast blocks, PCC filling for pressed steel door frame etc, including necessary formwork, weathering, slightly rounded or chamfered angles & throating, complete all as specified and as directed.

M&L for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregates) as in sub base, correction layer etc, complete all as specified and as directed.

S&F Aluminium Hat and coat hooks, solid body, 175 to 250mm, complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls, applying two coats of Birla/Asian wall care Putty (minimum thickness of two layers shall be 2.00mm) and thereafter applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and directed.

M&L for complete removal of existing treatment from the old decorated surfaces of wall, preparing the surfaces, applying two coats of Birla/Asian wall care Putty (minimum thickness of two layers shall be 2.00mm) and thereafter applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and directed.

M&L for applying Two coats of cement base paint over & including one coat of primer, also including preparation of new surfaces of wall etc, complete all as specified and directed.

M&L for complete removal of existing treatment from the wall surfaces etc by washing/rubbing down, preparation of the surfaces & stopping of filling nail holes / rough surfaces with putty / plaster of paris etc and thereafter applying two coats of cement base paint over & including one coat of primer, complete all as specified and directed.

S&F in repairs brass chromium plated shower roses, 125 mm size with or without swivel joints including fixing to 15mm bore steel pipe or union, complete all as specified and as directed.

S&F in repair grating doom 100mm dia of PTMP (minimum weight 25 grm), complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A-1 (using 20mm graded stone aggregates) as in lintel band including necessary formwork, complete all as specified and as directed.

Taking down carefully existing aluminium/copper point wiring (light / fan / socket or power point) complete, with all fittings such as switch socket combination, switches, sockets, regulator, ceiling rose, utility light fittings and lamp holders etc and making good the disturbed surfaces of walls, roof and floor etc to match with the existing specification, complete all as specified and as directed.

Material and labour for point wiring for one light point controlled by 1 one way switch/one Fan point controlled by one switch/one bell point controlled by one switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia, (also including conduit fittings & PVC Junction boxes etc, along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including factory made pressed steel sunken boxes (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm), concealed type with and including 3mm thick plastic laminated sheet cover for mounting switches, sockets, fan regulators etc, testing on completion also including cutting chases for concealed conduit, steel boxes etc, pinning in, making good the surfaces in CM 1:3 to match with the adjoining surfaces, complete all as specified and as directed.

All as per Item No 94 above but for one switch socket outlet, 5 Amp on independent board, complete all as specified and as directed.

All as per item No 94 here-in-before but for one socket outlet, 5 Amp on the same board, with other switches, complete all as specified and as directed.

All as per item No. 94 here-in-before but for one light point controlled by two, 2- way switch.

All as per item No 94 here-in-before but for one15 Amp switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.50 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity earth wire, complete all as specified and as directed.

Taking down existing unserviceable submain wiring (including conduit /casing -caping), any size and making good the disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed.

M & L for sub main wiring with 2 run of single core FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including PVC concealed conduit, medium grade, 25mm bore complete with fittings, PVC Junction Boxes, fixing accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, complete all as specified and directed. Note for Item No 100 & 101:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as "1RM".

M & L for sub main wiring with 2 run of single core FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including PVC concealed conduit, medium grade, 25mm bore complete with fittings, PVC Junction Boxes, fixing accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, complete all as specified and directed.

Supply and fixing switch piano flush type, single pole, one way, 5 amps, complete all as specified and as directed.

S&F switch, flush type, 5 Amps, SP, two way, complete all as specified and as directed.

S&F bell push, flush type, 5 Amps, complete all as specified and directed.

S&F socket outlet, 5 pin, 5 Amps, flush type, complete all as specified and as directed.

Supply and fix electronic fan regulator, flush type, 5 step not less than 100 watt, complete all as specified and directed.

Supply and fixing ceiling rose, 3 phase /PVC/Polycarbonate, isolated body, complete all as specified and as directed.

S&F Buzzer, Dingdong type, AC, 230 Volts, single pole, complete all as specified and directed.

Supply and Fix LED Lamp, 9 watt, retro fit, complete all as specified and directed.

Supply and fixing indoor LED 18/20 watt luminaires, Trim linea in a PC batten, compact appearance (with 4 Feet LED Tube light Luminaries), make Crompton : Cat No. LCTLN-20-CDL or equivalent of make BAJAJ/PHILIPS/HAVELL's as approved by the GE, including provision of twin twisted copper conductor flexible wire from ceiling rose to connector, complete all as specified and as directed.

Supply and fixing indoor LED 10 watt luminaires, Trim linea in a PC batten, compact appearance (with 2 Feet LED Tube light Luminaries), make Crompton : Cat No. LCTLN-10-CDL or equivalent of make BAJAJ/PHILIPS/HAVELL'S as approved by the GE, including provision of twin twisted copper conductor flexible wire from ceiling rose to connector, complete all as specified and as directed.

Supply and fixing in repairs Bulkhead LED 10 watt luminaires, complete with all inbuilt accessories, prewired, make HAVELLS : Cat NoHEXAFT 10W LED 857 SSYM BOPC IP66 or equivalent of make BAJAJ/PHILIPS/CROMPTON as approved by the GE, including provision of twin twisted copper conductor flexible wire, complete all as specified and as directed.

S & F Lamp holder, PVC/polycarbonate type with cord grip cap suitable for batten fittings, complete all as specified and as directed.

Taking down existing unserviceable distribution board, switch fuse unit, enclosure for MCB / DB (inclusive of MCBs etc of any type and capacity) and making good the disturbed surfaces, complete all as specified and as directed.

Supply and fixing sheet metal enclosure for MCCB DBs, IP-43, IK-09, Double Door, phosphatised, Powder coated , Triple Pole and Neutral (TPN), VERTICLE TYPE , 4 way, 415 Volts, complete with and including 250 Amps rated copper bus bar, also cutting nitches/opening in the wall for accommodating the enclosures, plastering to the back & sides of nitches/surfaces of opening in CM 1:3 & making good the damaged surfaces to match with the adjoining surfaces, complete all as specified and as directed .

S&F MCCB, 125 Amp, 4 pole, 50Hz, breaking capacity 16 KA, complete all as specified and directed.

Supply and fixing sheet metal enclosure for MCBs DBs, Double Door, phosphatised, Powder coated , Single Pole and Neutral (SPN), 08 way, 240 Volts, complete with and including 200 Amps rated bus bar, also cutting nitches/opening in the wall for accommodating the enclosures, plastering to the back & sides of nitches/surfaces of opening in CM 1:3 & making good the damaged surfaces to match with the adjoining surfaces, complete all as specified and as directed.

Supply and fixing MCB, SPN, C series, 10kA ruputring capacity, 40 Amps, 240 Volts, complete all as specified and as directed.

S&F MCB 'C' Series, SP, 06 to 32 Amp, 240 Volts, reputring capacity 10 KA, complete all as specified and directed.

Materials and labour for earthing complete with galvanised earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 metre below normal ground level with top edge of the plate not less than 1.50 metre below normal ground level connected to galvanised earth lead GI wire of 4mm dia by means of bolts, nuts and washers and check nuts of galvanised iron or steel GI earth wire protected by 25 mm bore light grade galvanised iron pipe including of 20 mm dia medium grade GI water tubing sheet metal 4mm wire mash funnel, charcoal or coke and common salt in paint and testing on completion as shown on electrical plate No.5 ofm SSR Part-I. including taking out unserviceable one, complete all as specified and directed.

Taking down and refixing of ceiling fans of any size and sweep after replacement of ball-bearing, greasing & servicing of fans, applying one coat of spray painting after preparation of the surfaces of the fans, also including making connection by providing 3 core 1 Sqmm flexible copper conductor wire ,complete all as specified and as directed.

Material and labour for galvanized iron tubing, 40mm bore, light grade with & including all fittings for protection of cable, laid along the wall etc, also including provision of necessary clamps, bolts, nuts etc, complete all as specified and as directed.

S&F ceiling fan, 5 star rating, white in colour,1200 mm sweep, 230V, SP, complete with accessories, MS hook made out of mild steel flat iron of size 25 x 5mm of the rquired length for hanging of ceiling Fan, also making connection with and including copper conductor cable from ceiling rose to fan, also including taking down of existing Fan and depositing the same in MES store yard of GE, complete all as specified and as directed, Make : Usha model TECHNIXPLUS ISI marked or Equivalent of make Havells/Bajaj as approved by the GE.

S&F in repairs Wall fan of size 400mm sweep (white), 230Volts, AC, provision of PVC copper conductor cable for making connection with ceiling rose, Make-Usha, Model No : MAXX AIR SUPER WF or equivalent model of Havells/BAJAJ as approved by the GE, complete all as specified and as directed. Note :- Rate of fixing arrangement as directed shall also be deemed to be included in quoted rate. Existing Fans etc retrieved shall be the property of the Deptt and the same shall be deposited in the MES store yard by the contractor.

S&F in repairs Exhaust fan, 300 mm sweep, 230 V, SP, metal body, heavy duty complete with and including accessories, luovers, anchoring bolts, nuts, washers, making opening for fixing of the Exhaust Fan and making good the surfaces of the opening with CM 1:3 to match with the existing surfaces and provision of PVC copper conductor cable for making connection with ceiling rose, complete all as specified and as directed, Make : Usha Model No : TURBO-DBB-G or Equivalent of make Havells/Bajaj as approved by the GE. Note : Existing Exhaust Fans etc retrieved shall be the property of the Deptt and the same shall be deposited in the MES store yard by the contractor.

Supply and fixing in repairs, single pole, neutral enclosure with & including a two pin & earth plug and socket, also with and including one number double pole, MCB, 20 Amps, 240 volts, 10 KA ruputring capacity, complete all as specified and as directed.

Supply and Fix square LED Recessed full lit luminaire with glare free uniform illuminiation including provision of copper conductor cable for connection, complete all as specified and as directed. Make - Crompton Cat No : LCTLRNE-36-FO-WW or equivalent of make BAJAJ/PHILIPS/HAVELL'S as approved by the GE.

Supply and fixing switch socket out let multipurpose, 3 pin, 15 amp and one 3 pin, 5 amp, controlled by one switch, complete all as specified and as directed.

MS ORIENT ENGINEERING WORKS

Janata Enterprises

KARMIBRINDA

METTLE WORKS

M/s TALCO

MS S S CONSTRUCTION AND CO