LWSS Daung Badota in Tehsil Kasauli Distt. Solan HP

Amount

Excavation in earth work and disposal of excavated earth upto a lead of 20 metres and lift upto 1.50 metres, disposed earth to be levelled and neatly dressed in Pick-Jumper work.

Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size) excluding cost of centring & shuttering in.

Foundation and Plinth.

Providing and laying cement concrete 1:1%:3 (1 cement: 1% sand: 3 graded Stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in.

i) Foundation footings bases of columns and the like and mass concrete.

ii),Walls (any thickness but not less than 0.1m) including attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level)

iii) Column, pillars, posts and struts upto all floor level.

iv) Side of beam, beam haunchings, cantilevers, lintels etc. not exceeding 1 mtrs.in depth in all height from floor.

Providing and laying no fine concrete 1:4(1cement:4agg. 40mm nominal size) & curing complete in foundation and plinth excluding cost of form work within all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batten and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete & plain conrete work in.

i) Plat surfaces such as soffits of suspended floors, roofs, landings & the like (Floors upto 200mm).

ii) Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like.

i) Columns pillars posts and struts square rectangular or polygonal in plan.

Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 grades stone aggregate 20mm nominal size) and curing complete excluding cost c form work and reinforcement for reinforced concrete work in.

Suspended floors, roofs, landing and shelves and their support, balconies beams, girders, bressumers and cantilever upto floor two level.

Providing mild steel/tor steel reinforcement for RCC work including bendin binding and placing in position complete upto floor two level.

Manufacturing, supplying & fixing of M.S frame 35x35x5mm with M.S she man hole cover 1.66mm thick made of M.S Angle 25x25x5mm with lockin arrangement with lock and painting with red oxide complete in all respec as per drawing & design with in all leads & lifts complete & as per th direction of the Engineer-in Charge.

Providing and laying in trenches, galvanized mild steel tubes (light grade tube fittings (earth work in trenches to be measured & paid for separatel For out let and scoring pipe.

40 mm dia

Poviding and fixing gun metal wheel valve of superior quality including all leads and lifts complete in all respects.

40 mm dia.

Supply, Installetion, testing and commisssioning of Mono Submersible pump set of make KSB/Crompton/ Kirloskar suitable to operate on 415 1 volts(+)(-) 10% AC supply complete with installetion connection to panel board as required complete in all respects.

Supply and fixing of Single phase control panel suitable for 2 HP Pump set complete with DOL starter of L&T, Havell make, ICTP swith, volt meter, ampere meter and power capacitor etc as required complete in all respects.

Supply and fixing of 2 core 2.5 mm2 PVC insulated copper conductor/ flexible cable of Havells make complete in all respects.

Providing and Installing submersible pump confirming to ISS 8034-1976 along with a directly coupled submersible type squirrel cage electric induction motor suitable for operation on 440-V-3 phase 50 CPS AC supply with water lubricated bearings, provided with pivoted segment type thrust bearings to with stand vertical pressure with minimum wear and tear and with device to take up the expansion of water with heating of motor complete in all respects including entire carriage of materials upto all leads and lifts complete in all respect.

Discharge : 1.00LPS.

Total Head = 164 Meters.

Dia of Rising Main =40 mm.

Length of Rising Main =830 meters.

Pumping hours =8 Hours.

Providing and fixing copper submersible insulated armored cable 2.5 mm2 or suitable size and capacity to and all other electrical equipment as per IS 1554(P-I) 1988 or latest amendment of Siemens/ Gloster/National/ EICO/Grandly / Havells make complete in all respects.

Providing and fixing suitable DOL starter of MEI/Kilburn/Jyoti/Siemes/L&T make as per IS 8544-1979 with up to date amendments for squirrel cage/slipring motor mounted on panel board with magnetic type overload release and dashpot, time lag under voltage release with or without intial oil fillings as the case may be with single phase prevent or as per IS 248(P-V)1983 with upto date amendments complete in all respect.

Providing and fixing of arrangement for installetion of Submersible Pump with 150 mm dia pipe complete in all respect within all lead and lifts.

Varun Sharma (BID ID -539716)