REPAIRS TO DRAIN, CHAINLINK FENCING, FOOTPATH, COMPOUND WALL AND HARDSTANDING IN OMQ, SINGLE OFFICER ACCOMODATION AND OFFICER MESS AREA AND REPAIR, MAINTENANCE TO SEWAGE SYSTEM, SEPTIC TANK, MANHOLES, SEWAGE LINES, GULLY TRAPS, UG SUMP IN OMQ AREA UN

Amount

M & L for Removal of blockage of sewage lines including manholes by using necessary tools/mechanically tools or manually such as passing rope knots bamboo kamti and disc of required size including safety measures such as test for gas etc before flushing the pipe well with water after removal of blockage of 100mm bore pipe complete all as specified and directed.

Ditto all as per Ser Item No 1.00 above but bore of pipe 150mm complete all as specified and directed.

Ditto all as per Ser Item No 1.00 above but bore of pipe 200mm to 300mm complete all as specified and directed. Note for Ser Item No. 1.00 to 3.00- (i) The rates quoted in the above item includes cost of T&P like rods, bamboos, gum shoes and hand glouses etc complete (ii) Minimum one sweeper and one helper shall be deployed by contractor and they shall be present on all days from 0900 hrs to 1700 hrs including holiday and Sunday for maintenance of sewage lines. The persons will be detailed by JE/AGE concerned every morning for attending complaints on daily basis. (iii) The complaint has to be rectified within 24 Hrs as given in complaint slip failing which penalty will be imposed @ 500/- per complaint per day and for ser no (ii) also.

M& L for Taking out silt, liquid water sludge in solid/semi solid state from septic tank/Manholes STP tanks of any capacity and size and removing the same using truck mounted honey sucker of capacity minimum 4 cum and to dispose off the sludge to in low lying area at any distance including Sunday and holiday as per requirement depositing the sludge in low laying area with covering by earth over it and leaving the septic tank/sump clean etc. all as specified complete. Note : Driver and operator must be passes a valid license and confirm the serviceability of the Truck complete all as specified and directed.

M & L for Cleaning of sewer line by mechanically by truck mounted sewage cleaning of sewage line water sludge tank with wash down system / suck derrick arm hydraulically spring loaded rotary sliding vane compressor with V hose end section no 33 nozzle and strainer complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation and getting out in soft /loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation and and getting out in Hard/dense soil complete all as specified and directed.

Excavation in trenches exc 1.5 mtr wide and exc 1.5 mtr and n exc 3.0m in depth for foundation and and getting out in Soft Disintegrated Rock complete all as specified and directed.

Demolition and breaking up drain pipes SGSW pipe including fittings and packing ,hunching and bed concrete complete of the size 100mm internal dia of SGSW pipe complete all as specified and directed.

Demolition and breaking up drain pipes 150mm internal dia of RCC pipe including fittings and packing, hunching and bed concrete complete all as specified and directed.

Demolition and breaking up drain pipes 200mm internal dia of RCC pipe including fittings and packing haunching and bed concrete complete all as specified and directed.

Demolition of brick work or PCC blocks built in cement mortar including coping of manholes complete all as specified and directed.

Demolition of PCC of any description provided for bedding of Manholes complete all as specified and directed.

Demolition of precast RCC manhole covers of any size complete all as specified and directed.

M & L for PCC 1:3:6 type C2 with 40mm graded stone aggregate as in foundation or bed concrete of manholes complete all as specified and directed .

M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in benching/haunching or surface channels and drains complete all as specified and directed.

M & L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping ,rounded or chamfered on edges complete all as specified and directed.

M & L for PCC precast solid block masonry walling (1:5:8) Grade D5 exc 10cm width /girth in CM (1:6) complete all as specified and directed.

Taking down cement plaster any description on brick/stone or concrete walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 10 mm thick in CM (1:3) internally to manholes on concrete block or concrete surfaces and finished even and smooth with using extra cement complete all as specified and directed.

M&L Rendering 10mm thick in CM 1:4 externally to manholes on concrete block or concrete surfaces and finished even and fair complete all as specified and directed.

M & L for PCC (1:3:6) type C2 concrete bed to drain pipes of dia 100mm dia including packing under and haunching against the sides of pipes after they laid and tested as required on ground condition complete all as specified and directed.

M & L for PCC (1:3:6) type C2 concrete bed to drain pipes of dia 150mm dia including packing under and haunching against the sides of pipes after they laid and tested as required on ground condition complete all as specified and directed.

M & L for PCC (1:3:6) type C2 concrete bed to drain pipes of dia 200mm dia including packing under and haunching against the sides of pipes after they laid and tested as required on ground condition complete all as specified and directed.

S&F 100mm bore salt glazed stone ware drain pipes Grade A laid in trenches and joined complete all as specified and directed.

S&F for Reinforced concrete pipes class NP-2, laid and jointed complete with collars if required for 150mm dia pipes.complete all as specified and directed.

Ditto all as per Ser Item No. 26.00 as above but for 200 mm dia pipes complete all as specified and directed.

Returning, filling in including spreading, leveling , watering and well ramming in layers not exc 25 cm in any statra complete all as specified and directed.

Removing excavated in any statra to distance not exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab (for manholes etc) and set in CM 1:6 including necessary form works complete all as specified and directed.

Taking out (desilting) silt brick bats, debris , liquid waste sludge in solid/semi solid state from manholes including pumping out sludge wherever necessary diverting the flow in the drain , if necessary and stacking the removed silts in depots away from the edge of manholes as directed including use of sfery belts, dry cells torch for lighting inside the manholes and taking similar precautionary measures and removing the sludge etc to a distance exc 250 mtr but not exc 500m & leveling the manhole cleaned and flushed with water etc all as specified /directed manholes up to the depth of 1.00 mtr.

Ditto all as per Ser Item No. 31.00 above but manholes depth exc 1.00 mtr and n exc 2.00 mtr complete all as specified and directed.

Ditto all as per Ser Item No. 31.00 above but manholes depth exc 2.00 mtr complete all as specified and directed.

M&L for MS TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends & binding with and including MS annealed wire not less than 0.9mm dia.complete all as specified and directed.

Ditto all as per Ser Item No. 34.00 above but 6 to 8mm dia complete all as specified and directed.

Demolition and breaking up CI/PVC drain pipes 50 to 110 mm complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Ditto all as per Ser Item No. 37.00 above but fixed in walls including clamps complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Ditto all as per Ser Item No. 39.00 above but fixed in walls including clamps complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single Y equal or unequal complete all as specified and directed.

S & F of PVC (SWR) branch piece 110mm dia , double (double Y) equal or unequal complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece, single Y equal or unequal complete all as specified and directed.

S & F of PVC (SWR) branch piece 75mm dia , double (double Y) equal or unequal complete all as specified and directed.

Cleaning the CI/PVC/SGSW pipe of any dia from water closet /floor trap/nahani trap to Ist holes by rodding/choke remover manually as in foul condition after taking off manholes cover and placing the manholes cover in original position etc complete all as specified and directed. (Note :-Contractor has to detail two labour (Safaiwala) daily to attend complaint at complaint cell at 9.00 AM who will again report to Engr-in-Charge after completion of complaint with complaint slip duly signed by the users).

M & L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required 150mm Dia complete all as specified and directed. ( Note : Work in Foul Position )

M & L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required 200mm Dia complete all as specified and directed. ( Note : Work in Foul Position )

S & F PVC (SWR) gully trap 110 mm dia fixed in cement concrete including removal of existing old damaged gully traps and providing connection upto 1st manhole with PVC pipe complete all as specified and directed.

S & F PVC (SWR) flooar trap 75 mm dia fixed in cement concrete including jointing with solvet cement and making all good all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured Non skid ceramic tiles of size 300x300mmx7, 450x350x7mm, 350x250x7mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L Glazed Ceramic Coloured Tiles, 300X200X7mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving's n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed.

S &F in repair VItreous china wash down water closet pan (Pedestal pattern ) white pan 'P' or 'S' trap and to flusing pipe antisyphonage pipe etc complete with flush pipes to pedestal pan including all joints in repair complete all as specified and directed.

S&F plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Cutting down the plant/trees of girth n exc 15cm, from roof/top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI/CI/AC/PVC pipes and taking out roots entered in wall/slabs, applying emulsion of non toxic chemicals including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) to match with existing surface and repairing the pipes and joints which was affected by cutting down/taking out process all as specified and as directed for plants / trees located upto a ht of 7.50 mtrs from GL.etc. complete all as specified and directed.

S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding and PVC low level flushing cistern 10 Ltr capacity including 32mm PVC flush pipe, all internal fitting, inlet, outlet pipe connections etc. complete all as specified and as directed.

S & F for 40 mm bore unplasticised PVC pipes of presssure rating 10Kgf/cm 2 fixed complete to walls ceiling or in floors all as specified and directed . (Rate : Socket, tee, elbow, plugs, wall clips etc inclulded ).

S & F Grating doom 100mm dia of Stainless steel with holes for waste pipes complete all as specified and directed.

S & F Grating doom 75mm dia of Stainless steel without holes for waste pipes complete all as specified and directed.

Complete removing of filling materials between loose tiles joints and refilling them with mixture of white mixture of white cement and pigment to match the joints with tile surface and cleaning the complete surface from stain and other foreign material complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floor apron etc laid bedded and pointed in cement mortar complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60mm thickiness M-35 grade complete all as specified and directed.

M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and directed.

M&L for Coloured chequered cement concrete glazed tiles of size 30cmx30cmx22mm thick in floor laid and jointed in cement slurry and pointed in grey cement and pigment over 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

Dismantling chain link fencing/expanded metal or mesh not exceeding 4kg/Sqm fixed in steel, wood fillets, concrete post etc. of any description complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling posts or struts (wood,steel or RCC)any section ,including taking out embedded in concrete or brickwork complete all as specified and directed.

Demolition of stone slabs and chequired tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of bricks (laid flat or on edge) or interlocking tiles in floors, channels, kerbes, aprons, etc laid dry of laid dry and pointed complete all as specified and directed.

Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed.

Providing and fixing Precast cement concrete Type C1 1:3:6(20mm graded aggregate) in Framework for louvers and jallis, lintles, string courses, precast posts,fencing posts, boundery pillers with plain fair faces including chamfers, weatherings, throating etc setting in CM 1:4 complete with joints to match complete all as specified and directed.

Providing and fixing Precast cement concrete louvers and jallies 25mm thick Type B0 1:2:4 (20mm graded aggregate) (measured solid) set in cement mortar 1:4 ,including all moulding but excluding frame complete all as specified and directed. (pre cast frame shall be measured separately as Item above)

M& L for form work to rough finished flat surfaces to sides of pillars posts struts piers columns and stanchions complete all as specified and directed.

M&L for form work to rough finished surface to sides of beams, sides and sofits (if any) of foundations and plinth beams and similar works: verticals or to batter

M&L RCC type B11:2:4 (20 mm grade aggregate ) in beams, plinth beams, Lintels etc basement slabs , under reamed piles and mass concrete complete all as specified and directed.

M&L RCC type B11:2:4 (20 mm grade aggregate ) in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC Type B1 1:2:4 (12.5mm grade aggregate ) in Copings, kneelers, apex stons, Kerbs etc including weathering,slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for broken glass coping on top walls in cement mortar 1:3 including dimolition of old existing glass coping(if required) and removing the rubbish complete all as specified and directed.

M&L for Fe 410-W (GdeE- 250) quality A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L pre-cast cement concrete (20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonary with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Ditto all as per Ser Item No. 86.00 above but except blocks complete all as specified and directed.

M&L random rubble stone masonary well bonded bedded solidily hearted in CM 1:4 complete all as specified and directed.

Ditto all as per Ser Item No. 88.00 above but except stones complete all as specified and directed.

M&L for 15 mm thick rendering on stone masonry works or other than fair faces of brick work or concrete surface finished even and fair without using extra cement in cement mortar 1: 4 complete all as specified and as directed

M&L Flush pointing to random rubble,uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed.

Supply and fixing mild steel work as in angle iron, flat iron of any size for post and struts as in fencing including, cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh ,chain link fencing etc including all necessary drilling bolting or riveting etc and/or fixing with screws, bolts etc. and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Ditto all as per Ser Item No. 92.00 above but fixing only complete all as specified and directed.

M&L Chimney bars (straight or camber), bearing bars for fencing ,ton-gues or water bars for window frames, window guard bars,plain,let in and fixed independently in wooden frames,L or T section supports for shelves etc,and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing of weight not less than 3.5 Kgs per sqm and size complete all as specified and directed.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) incl removal of old unservicebale barbed wire complete all as specified and directed.

S& F in repairs wire entanglements wth galvanised steel concertina coil of dia 600 mm reinforced with punched (chrome rajor of blade wire) barbed tape of 2.5mm thick galvanized steel sheet at 75mm saplings and core wire of dia 2.24mm high tensile steel wire complete all as specified and directed.

M&L for preparation of new plastered wall surface of any description and applayng two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of old plastered wall surface of any description and applying one coat of cement based paint complete all as specified and as directed.

M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors, sub- bases, floors and pavings,etc. complete all as specified and directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in floors ,plinth protection and pavings finished with spike rolling to surface or making impressions of expanded metal ,whilst the concrete is green complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection complete all as specified and directed.

M&L for Glossy finish Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with whitecement & pigments laid over 20mm thick cement screed base (1:6) complete all as specified and directed.

M&L for PCC type D-2 (1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation complete all as specified and directed.

M&L for dressed granite or trap /Precast cement concrete type C2 (1:3:6) (12.5 mm nominal size of graded course aggregate) Kerb stones roughly squared/rectangular pieces of minimum thickness 15cm and height 30 cm ,so that the maximum depression from a straight edge held against the dressed surface shall noot exceed 6mm for top and exposed surfaces of sides and 15mm for the rest of surfaces jointed in cement mortar 1:6 and struck finish ( rate included for removal of old damaged curb stones of any description) complete all as specified and directed.

M & L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms/moulds mitread/stopped ends etc complete all as specified and directed.

M & L for granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing width white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S & F for 16 to 18mm Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25sqm fixed with and including making V groove at top and bottom of stone and drilling hole for hold fastener polishing rubbing and including silicon treatment complete all as specified and directed.

Machine cut cudappah stone slab 20-25mm thick over 10mm thick plaster of cement 1:3 in wall and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed.

S.R.M.K Enterprises