Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹21.0 L+₹1.5 L (7.58%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹24.6 L+₹5.1 L (26.1%)Rejected-Finance A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹25.2 L+₹5.7 L (29.4%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹28.0 L+₹8.5 L (43.8%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
PERIODICAL SERVICES TO CERTAIN OTM AND CENTRAL AMENITIES BLDG AT BAIRAGARH AND SI LINES AREA UNDER GE BHOPAL
2023_MES_594027_1
8982/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹70,000
Yes
3 Aug 2023
9 May 2023
7 Jun 2023
9 May 2023
5 Jun 2023
23 May 2023
Amount
Note : 1. Contractor will deposit the requisite quantity of distemper, exterior weather coat paint, and other materials with original purchase vouchers, manufacturers test certificate as directed by Engr-in-Charge within fifteen days from the date of commencement of the work. The paint will be issued to the contractor as and when required for carrying out the work at site which will be signed by contractor or his rep and Engr-in-Charge. 2. Mixing of oil bound distemper, exterior/interior emulsion paints etc shall be carried out with mechanical mixer/stirers. 3. Surface shall be allowed to dry completely before application of any paint. wet or newly plastered surfaces with visible moisture shall not be painted till it is dry. 4. The rate quoted against BOQ are including necessary scafolding expences upto triple story buildings.
M&L for removal of existing treatment on wall (Internal/External)/chajja/roof projections including facias, cornices etc by scrapping with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc) & (External surface by washing/cleaning down with water) by skilled labour including filling holes, cracks, depressions of scraped surfaces with putty and preparation of surfaces for further treatment complete all as specified and directed.
M&L for providing and applying minimum 1mm thick wall care putty (where it is required) over prepared surfaces to achive the surface even and smooth for further application of finishes complete all as specified and directed.
M&L for applying Two coats Exterior weather proof emulsion paint of 100% Premium acrylic emulsion paint on new or old prepared wall surfaces incl chajja, patta etc. having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, water, alkali & fungal resistance, dirt resistance of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. (Make :- Asian - Apex ultima, Berger long life 10, Dulux - Weather shield.) NOTE:- 1. Application of primer & emulsion to be carried out through airless spray machine (mechanical means) and existing fittings, fixtures, window panes, joineries, floors etc. shall be cleaned after application of primer & emulsion. 2. Wall care putty (if required at site before application of above painting in certain portion) shall be done and same shall be measured and paid seperately under serial item No 2.00. 3. The work of applying exterior emulsion paint including filling of wall cracks and making the surface even & smooth shall be carried out as per manufacturer's specifications.
All as per item No 3.00 above but one coat of Exterior weather proof emulsion paint on old prepared surfaces of wall including brooming down scraping down smoke spot and stopping nail mark filling by cement base putty (where it is required) surfaces including chajja, patta etc. surfaces complete all as specified and directed.
M&L for applying Two coats of Acrylic distemper emulsion on new or old prepared wall surfaces incl window & door jambs, cills, cornices etc. having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of primer as per manufacturer's specification complete all as specified and directed. Make:- Asian-Tractor emulsion spark, Berger distemper, Nerolac-Little Master(Beauty) NOTE : 1. Application of Primer & emulsion to be carried out through roller or air less spray machine (mechanical means) and existing fittings, fixtures, window panes, joineries, floors etc. shall be cleaned after application of primer & emulsion. 2. Wall care putty (if required at site before application of above painting in certain portion ) shall be done and same shall be measured and paid seperately.
All as per item No 5.00 above but One coat of Acrylic distemper emulsion on old prepared wall surfaces incl window & door jambs, cills, cornices etc. complete all as specified and directed.
M&L for preparation of old surfaces of wall including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old treated surfaces of ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old treated steel surfaces of any description exceeding 10 cm width or girth and applying one coat of synthectic enamelled paint complete all as specified and directed.
M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthectic enamel paint complete all as specified and directed.
M&L for preparation of old treated steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthectic enamelled paint complete all as specified and directed.
Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in two layers of (10+5) mm in CM 1:4 mixed with Pidi Proof 101 LW (+) of Dr fixit or equivalent integral water proofing admixture compound @ 200ml/bag in outer layer complete all as specificed and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for rendering 10 mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
Clearing away roots, and trees not exceeding 30 cm girth on buildings at any height incl all grass, vegetation, saplings, shrubs, brushwood, undergrowth, and removing rubbish upto a distance of 50 mtr outside the periphery of the area under clearance except in the case of surface dressing which includes for all the foregoing except clearing away of trees complete all as specified and directed.
M&L for crack filler for filling of cracks on internal and external wall surfaces by cutting V-groove in cracks width more than 3mm and upto 10mm and filling it with crack filler to make surface even and smooth for further application of wall finishes and necessary scaffolding suitable for height upto 10.00m from average ground level complete all as specified and directed. Make:- Dr Fixit, CICO crack seal, Asian paints smart care crack seal
S&F 3.00mm thick frosted glass and glazing with oil putty/ wooden beading alround to wooden/ iron surrounds complete all as specified and directed.
M&L removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over one coat of white cement based putty (where it is required) complete all as specified and directed. Note : Putty shall be measured and paid seperately.
Preparation of old decorated surfaces of wall including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and one coat of oil emulsion distemper complete all as specified and directed.
M&L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling Birla white putty and applying one coat of cement based paint complete all as specified and directed.
M&L for removal of old decorated surface of wall and applying two coat of interior plastic emulsion paint white/coloured over and including one coat of white cement based putty (where it is required) complete all as specified and directed. Note : Putty shall be measured and paid seperately.
M&L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling by birla putty and applying one coat of interior plastic imulsion paint white/coloured complete all as specified and directed.
All as per item No. 23.00 above but one coat of plastic emalsion paint on ceiling complete all as specified and directed.
M&L for ShaliCryl ® 215 single component, UV resistant, unique elastomeric, high build exterior waterproofing coating based on a revolutionary acrylic polymer with quick-set capabilities to resist moisture attack complete all as specified and directed.
Surface Preparation:- Remove all loose and foreign materials, if any, by a wash with a jet of air / water. • Repair structural defects before application of ShaliCryl® 215. • Fill voids and undulation area with Polymer Mortar made out of ShaliSBR Latex, Water, Cement and Sand in the Ratio of 1:1:5:12.5. • Fill cracks up to 3 mm with PlastiSeal and cracks over 3 mm with PlastiSeal P after opening the crack to a “V” cut. • In case of any poor plaster surface in existence (for old building), remove the same and corrected with new cement : sand in the ratio of 1 : 4 admixed with ShaliPlast LW+ @ 200 ml / bag of cement.
Primer Application:- Apply ShaliPrime WB as Primer after dilution with potable water in the ratio 1:0.5 for a theoretical Coverage 8-10 Sqm/Lt of the mix and allow it to dry for 3 – 4 hrs. post elimination of undulation, roughness of concrete, joint marks, voids and any other surface correction.
Application of Material • Apply first coat of ShaliCryl® 215 over the primed surface @ 160 ml / Sqm. Add maximum of 10% potable water by volume for the first coat only, if required, to have brushable consistency only. • Allow the applied coating to dry 6 – 8 hrs of application. • Apply second coat of ShaliCryl® 215 without dilution over dried first coat @ 140 ml / Sqm and allow it to dry. • Do not undertake any further work over the coated area within 72 hrs of final coat. • A coat of 100 micron of ShaliCryl TC 100 will improve water / dust repellent property.
Taking down plants/vegetable growth, etc (upto 10cm girth), from buildings walls, parapets by cutting/chiseling fully without disturbing structure upto height of 10.00m from average ground level at different locations and cleaning the surfaces neatly with wire brush to remove dust and other foreign particles and applying hydorochloric acid (HCL) on left over root portion and making good the disturbed surfaces in cement mortar 1:4 complete all as specified and directed.
M&L for rendering 15 mm thick cement mortar on brick/stone surfaces or surfaces other than fair faces of brick work in cement mortar 1:6, even and smooth finish without using extra cement, in patches complete all as specified and directed.
M&L for rendering 10mm thick on fair faces concrete surfaces with cement mortar 1:4 on ceiling even and smooth finish in patches complete all as specified and directed.
S&F chicken wire mesh, mild steel 12mm mesh size and 0.56mm dia of wire complete all as specified and directed.
Hacking out old broken glass (any thickness quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane complete all as specified and directed.
S&F 4.8mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and directed.
Complete removal of existing treatment on surfaces of RCC Over Head tank for height upto 21.00 m (any number of layers) by scrapping including filling holes, cracks, depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats of exterior water base emulsion paint on white or tinted complete all as specified and directed. [Make:- Apex Ultima Paint of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE] NOTE:- (a) The rate quoted are inclusive of neccessary scafolding expenses upto 21.00 m height OHT (04 Nos) (b) The rate quoted are inclusive of removal of honey bee hives from OHT at any height. (c) The work of applying exterior emulsion paint shall be carried out by authorized representative/applicator of the manufacturer. (d) A Guarantee of 5 yrs from the certified date of completion for the effectiveness of exterior acrylic emulsion weather coat paint shall be submitted by the manufacturer and contractor. (e) A Security deposit @2.5% of the amount of treatment shall be deposited by the contractor for the entire guarantee period i.e. 5 yrs in the form of FDR in favour of GE. (f) During the guarantee period if exterior acrylic emulsion weather coat paint gets removed or becomes layered contractor shall rectify or replace (at his option) defective materials at his own expenses, when called upon in writing to do so by GE. Condition 46 of IAFW-2249 (defects liability period) for the guarantee period shall be deemed amended accordingly for the work.
Preparation of surface of any description wood, steel, iron, concrete, brick etc exc 10 cm in width or girth i.e. 300x300 mm and treated with black synthetic enamel paint of superior grade and writing building numbers in figrues not exc 30 cm high complete all as specified and directed.
Preparing surface of any description wood, steel, iron, concrete, brick etc index hands(natural size) or arrow(upto 40 cm long) complete all as specified and directed .
Preparing surface of any description wood, steel, iron, concrete, brick etc stop, commoms, short lines, dashes, hypens, brackets etc complete all as specified and directed.
Samaksh Enterprises
Jyoti enterprises
M/s H V Infra Projects
SHIV SHANKAR MISHRA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .