Misc civil work at SB (HQ) Lko

Amount

Laying and Jointing PVC Pipe. Heading

Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work.

First class brick work in 1:6 cement and coarse sand F.M.1.8 to 2.5) mortar in S.S.including supply of all materials, labour & T&P etc. required for proper completion of work.

12 mm thick plaster with cement mortar consisting of one part of cement & Six part of coarse sand (1:6), minimum thickness Not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

Supply and Laying 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make, of size 300x300 mm, laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. completion required for proper completion of the work.

Supply and Laying 6 mm thick glazed tiles of size 300x450 mm in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete,including supply of all materials, labour and T&P etc. completion required for proper completion of the work.

Providing and laying floor of 8 mm thick vitrified tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work.

Providing and laying of 16 mm thick granite ( black/ brown) in flooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge.

Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.

As in item 02 above but for every coat after first coat.

Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.

Painting with one coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint on previously painted surface. including all labour, material and T&P etc required for proper completion of the work, ( preparation of base with Birla putty etc. and a coating of primer shall be paid extra) .

Same as above in Item No-14 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint.

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres.

Dismantling for floors to be stone flagged or tiled floor. including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres.

Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C with in a distance of 60 M.

Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Renewing panes of 4 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.

Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made).

Providing and fixing sun-film of Gareware or equivalent make on glass panes of door and window shutters including cost of all materials,labour and T&P etc. required for proper completion of the work.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

20 mm dia nominal bore outer dia pipe

20 mm dia nominal bore outer dia pipe

Providing and fixing full way20 mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Making water connection of pipe line with Mains ( 25 mm to 100 mm ) dia. by providing and fixing Ferrule (25 mm dia) GI union and nipple including cutting and threading the pipe, inspection, testing, cutting and making good the road, executing bond with Nagar maha palika, fixing of pipe line upto the points near the building complete work including supply of all materials, labour and T&P etc. required for proper completion of work..

Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work.

Providing and fixing 750 mm x 20 mm size C.P. brass towel rail of approved quality including brackets including supply of all materials,labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work.

Supply and fixing 100 mm PVC Nahani Trap India make of heavy approved quality complete with CI grating, including supply of all materials,labour and T&P etc. required for proper completion of the work.

Providing and fixing CI GRATING 100 mm dia including all materials, labour cartage T&P etc.required for proper completion of the work.

Providing and laying , PVC ( FiNolex or quivalent ) pipe excluding cost of excavation, C.C. etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work 110 mm dia.

Providing and fixing 110 mm dia SWR, PVC ( FiNolex or equivalent ) Bends including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and fixing 110 mm dia SWR, PVC ( FiNolex or equivalent )Trap including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and fixing 110 mm dia SWR, PVC ( FiNolex or equivalent )socket including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and fixing 110 m m dia SWR, PVC ( FiNolex or equivalent ) plain tee including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profile white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong Miniral Fobre Sound Absorbing Sheet including cost of all materials,labour and T&P etc. required for proper completion of the work.

Supply and fixing of Jet Spray Model No-AHS-1557 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work .

Providing and fixing soap dishpence Model No-can-1137N Jaquar make or Equivalent including supply of all materials,labour and T&P etc.required for proper completion of the work.

Supply and fixing of of waste Coupling of make Model No-ALD-705L130 of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Health Faucet Model No-ALD-CHR-565 With 1.00 Mtr Long Flexible Tube in chrome Finish and Wall Hook of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Extended Wall Hung Model- CNS WHT-353S with Cistren Model CNS-WHT-203 of Jaguar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Wash basin Model No-FNS-WHT-40801 Size-600X470X160 Padestal Model No- FNS-WHT-40301 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Two way Bib cock with wall flange Model Noopp-15041PM of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Basin trap with regular swinging spout(wall mounted model) with Model No-FLR-CHR-5347N of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Angular Stop cock with wall flange Model No-OPP-15053PMof Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Providing & fixing of Lamination both side on flush door complete with all fittings(excluding cost of Door Lock & Door Closure), etc all complete all complete as per drawing, specification and direction of engineer incharge.

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit with modular type switch in place of piano type switch. .

Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduitwith modular type switch in place of piano type switch .

Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit plug point with modular switch & socket in place of piano type switch & socket.

Supply and fixing of Havels make or equivalint Heavey duty Exaust fan as per direction of Engineer - in - charge required for proper completion of the work.

Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work.

First class brick work in 1:6 cement and coarse sand F.M.1.8 to 2.5) mortar in S.S.including supply of all materials, labour & T&P etc. required for proper completion of work.

12 mm thick plaster with cement mortar consisting of one part of cement & Six part of coarse sand (1:6), minimum thickness Not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

Dismentaling 2 Nos old CI Pipe ncluding cost of scafolding, all labor material, T&P etc required for proper completion of the work.

Providing and fixing of Supreme make or equivalent make 160 mm dia PVC pipe of 6 Kg pressure for ground floor to 07th Floor vertically in duct/wall including cost of Tee, bend,Clamp, scafolding, all labor material, T&P etc required for proper completion of the work.

Providing and fixing 32 mm dia nominal bore outer dia pipe Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

Making water connection of pipe line with Mains ( 25 mm to 100 mm ) dia. by providing and fixing Ferrule (25 mm dia) GI union and nipple including cutting and threading the pipe, inspection, testing, cutting and making good the road, executing bond with Nagar maha palika, fixing of pipe line upto the points near the building complete work including supply of all materials, labour and T&P etc. required for proper completion of work.

M/S R K CONSTRUCTIONS AND SUPPLIERS

AAKRITI ENTERPRISES