COMPREHENSIVE REPAIRS OF B R WORKS TO MD ACCN IN ZONE II AREA UNDER GE MCEME SECUNDERABAD

Amount

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles all as specified and as directed by Engineer -in-Charge.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer -in-Charge.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified as directed by Engineer -in-Charge.

M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes and as directed

M&L for rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc and as directed

M&L for 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes and as directed

M & L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments and as directed

Dismantling Stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc all as specified and as directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for pillars and etc all as specified and directed by Engineer in charge.

Taking down chowkhats of frames with shutter without taking taking off shutters from the frames not exc. 1.5 sqm and as directed

Taking down chowkhats of frames with shutter without taking taking off shutters from the frames n. exc 1.5 sqm but not exc. 04 sqm and as directed

Taking down Shutters and Resecuring or easing & adjusting, and fixing the same opening of any description exc 1 sq. m and n exc 2 sq. m each and as directed

M&L for Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engr-in-Charge.

M & L 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded on chamfered put together with glue pinned at joints and as directed

S&F 125x60mm pressed steel frames for door with one or more rebates including necessary fixing lugs,hinges ,lock ,strike plate etc and as directed

S&F 2nd class hard wood 35 mm thick, plain, framed, panelled shutter ( any number of panels) with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge

S&F 35mm thick IInd class hard wood Glazed and skeleton shutters, for windows and ventilators and door open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutter as specified in SSR Part-I, Sec-8, Clause 8.24 a and fixed to chowkhats complete all as specified and directed.

S&F butt hinges medium weight, cold rolled mild steel 100mm long and as directed

S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and as directed

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section and as directed

S&F aluminium handles 150mm long fabricated type anodised all as directed

S&F 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate fixing to door frame with welding or any means complete all as specifid and directed by Engineer in charge.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed and as directed

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and directed.

Demolition of brick work of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for brickwork with fly ash old size bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified

Taking down cement plaster or cement lime plaster of any description including racking out joints and hacking for key and scrubbing down with water etc and as directed

M&L for rendering 15 mm thick in concrete surfaces of walls set in CM 1:6 finished even smooth without using extra cement complete all as specified

M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4 finished even and smooth with using water proofing compound @3% without using extra cement complete all as directed. (Note : WPC will be measured separately) ( ht up to 12 m) and as directed

Supplying only Integral waterproofing compound and as directed

M&L for applying two coats of OBD over two coat of wall care putty over a coat of alkali resistant primer including preparing the new plastered wall surfaces complete all as directed

M&L for preparation of two coat of cement base paint over a coat of alkali resistant primer on newely plastered surfaces of walls complete all as directed

S&F in repair true or horizontal level 600mm x600 mm panels false ceiling , hot dipped galvanised steel sections exposed surface with precoated capping , main tee of size 24x32 mm at evrery1200 mm c/c and cross tee of size 24 x27 mm ( 1200mm & 600 mm long ) at every 600 mm c/c and wall angle of size 19x19 mm fixed to perimeter wall, as per manufacturer's instructions , grid to be suspended at every 1200mm c/c in both directions by using 3mm dia pre-straightened GI wire at every 1200mm c/c internal at the main tee, including 8 to 9 mm thick gypsum board of size 600mm x600mm with rear side aluminium foil and front side PVC lamination , complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in repairs fancy type chromium plated 15 mm bore 2 in 1 bib cock , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and as directed

S&F in repairs,10 litre capacity, low level PVC flushing cistern, syphonic action type white colour with in let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engr-in-charge

S&F in repairs Bib tap, cast copper alloy, 15mm dia long body with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed by Engineer-in-Charge.

S&F in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair viterous china wash basin, white flat back size 550mm x 400 mm including brackets with waste pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor making good, fancy type complete and as directed

S&F in repairs 15mm bore Fancy type pillar taps, long shank (swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed and as directed

S&F in repairs Fancy type chromium plated 15mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionsand as directed

S&F in repair 15mm bore CP Pillar tap cast copper alloy, screwed down, high pressure, with quarter round handle, with or without lettered hot or cold with long screwed shanks and fly nuts screwed complete all as specified and as directed by Engineer-in-Charge

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples etc.complete all as specified and as directed by Engineer-in-charge.

S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples etc.complete all as specified and as directed by Engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (ht up to 15 m) and as directed

S&F plain sheet glass ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 3 mm thick plain glass on new or old windows all as specified and directed by Engineer-in-Charge.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L 100 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) hard standing finished even and smooth without using extra cement. With spike rolling to to surface or maing impressed of expanded metal and as directed

Dismantling of 1000 ltr water storage tanks and removed to store complete all as specified.

Dismantling of 500 ltr water storage tanks and removed to store complete all as specified.

S & F 1000 ltr capacity of rotational moulded PVC water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including float valve complete all as specified and directed.

S & F 500 ltr capacity of rotational moulded PVC water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including float valve complete all as specified and directed.

Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above GL) and as directed

M&L for 75 mm thick Cement concrete type D4, 1:4:8 (40mm graded aggregate)as in sub base and as directed

M&L for 50 mm sand filling under floors or in foundations including watering and consolidation spread, rolled and consolidated to gradient and camber required and as directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment and as directed

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes with bleaching poder exc 250 ltr and n.exc 500 ltr all as spd and directed

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes with bleaching poder exc 500 ltr and n.exc 10000 ltr all as spd and directed

ATUL ENTERPRISES (BID ID -3303194)

Vara Enterprises (BID ID -3305479)

G SATISH REDDY AND CO (BID ID -3311371)

NEWS CONSTRUCTIONS (BID ID -3305596)

VACON INFRASTRUCTURES (BID ID -3311245)

AMK Builders (BID ID -3304729)

PARDEEP AND CO (BID ID -3305429)

Squad 7 Projects and Services Pvt Ltd (BID ID -3302644)