LTG/441/WD-16/BR-II/Z-I/25-26

SUPPLY AND INSTALLATION OF SPILT TYPE ROOM AIR CONDITIONING MACHINE OF 2 TON CAPACITY HITACHI MAKE NON INVERTER 3 STAR RATING FITTED WITH ROTARY COMPRESSOR AND COOLING CAPACITY MIN. 600K CAL/HR MINIMUM DISCHARGE AIR FLOW 800 CUM MTR, 800EER (W/W) 2.7-2.89 AS PER IRRIGATION AND WATERWAYS SCHEDULE 2022

PROVIDING & FIXING OF ISI MARKED RIGID CPVC DRAIN WATER PIPING 6 KG/CM2 WITH FITTING IN WALL WITH ELBOW SOCKET TEE ETC

SUPPLY. INSTALLATION,TESTING & COMMISSIONING SUCTION/ DISCHARGE COPPER PIPE LINE IN SPLIT AIR CONDITIONING UNIT 1/1.5 TR/2TR/3TR CAPACITY INCL BRAZING,NITRILE,RUBBER INSULATION 6/9MM THICK O RING AS REQUIRED (I)1/4" COPPER TUBE

SUPPLY. INSTALLATION,TESTING & COMMISSIONING SUCTION/ DISCHARGE COPPER PIPE LINE IN SPLIT AIR CONDITIONING UNIT 1/1.5 TR/2TR/3TR CAPACITY INCL BRAZING,NITRILE,RUBBER INSULATION 6/9MM THICK O RING AS REQUIRED (I)5/8" COPPER TUBE

Supplying, fitting & fixing granite tiles 10mm to 12mm. thick in columns, wall, facia etc. with 15 thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. [Using cement slurry at back side of tiles@ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] Area of each slab upto 0.2 Sq.m. (Add extra for each addl, floor over the rate for item 22, 25, 26, 17, 20, 31, 32 & 15 of subhead A. (I) upto 4 th floor- Rs. 12/-per Sq.m (II) above 4th floor -Rs. 16/- per Sq.m

Painting block letters or digits in Black Japan or any approved paint as per direction. h) Size above 15 cm. and upto 20 cm. NB.: The above rates will be enhanced by 100% if the letters are engraved and painted.

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection L&T 6-32A DP

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket brand(approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

20/25A starter

20/25A plug top

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall FOR housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building 4 Module

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall FOR housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 2 Module

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire brand(approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

Sub Total