Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.9 LAccepted-AOC N S T COLONY CIRCULAR ROAD HOUSE NO 04 DMC DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹45.1 L+₹4.5 L (11.0%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹47.3 L+₹6.6 L (16.4%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹47.6 L+₹7.0 L (17.3%)Rejected-AOC | L4 | Rejected-AOC Higher bid value |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
21 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR MAINT OF GROUP VIII UNITS LOC AT DIMAPUR AND MAINT CIVIL WORKS ASSETS AT R AND O FLY UNDER AGE BR II AT RMS
2024_MES_640022_2
8599/C/E8
Open Tender
Civil Works
Item Rate
120 days
RANGAPAHAR
Class D Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹80,000
27 Mar 2024
2 Mar 2024
23 Mar 2024
2 Mar 2024
21 Mar 2024
9 Mar 2024
2 Mar 2024 - 6 Mar 2024
Amount
Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and as directed.
Demoiliton of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc. complete all as specified and as directed.
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for etc. complete all as specified and as directed.
Demolition of cement concrete ground floor and paving nexc 15cm thick (below or above ground level ) etc. complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc. complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets etc. complete all as specified and as directed.
Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins , shelves and similar works etc. complete all as specified and as directed.
Dismantling timber scantlings 40 sqcm and over in section unframed work etc. complete all as specified and as directed.
Dismantling timber fillets, rails , posts, rafters, purlines, etc. under 40 sq cm in section etc. complete all as specified and as directed.
S&F 2 mm solid thickness corrugated poly carbonate sheet as in roof covering /cladding to wall fixed with self tapping screws as in repairs etc. complete all as specified and as directed.
M&L for Polythene film, 150 micron thick, laid over a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m on roof surfaces.The work will be carried out upto triple storey building & the rate for scaffolding is included in this item also etc. complete all as specified and as directed.
S & F Pre-painted galvalume aluminum zinc coating GI vased corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc. complete all as specified and as directed.
S & F Pre-painted galvalume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc. complete all as specified and as directed.
M&L for 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 etc. complete all as specified and as directed.
M&L 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc. complete all as specified and as directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping etc. complete all as specified and as directed.
M & L for block boards, 18/19 mm thick, grade 1 quality, interior grade , commercial type fixed with screws to timber frame work , for cup board including lipping / beading as required complete all as specified and directed.
S & F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, for cup board including lipping / beading as required complete all as specified and directed.
M&L for external teak wood lipping 6 mm thick , fixed with nails on particle board 12 mm thick etc. complete all as specified and as directed.
S&F 30mm thick continuous (piano) hinges, mild steel, bright finish or electrogalvanised etc. complete all as specified and as directed.
S&F 30 mm thick factory made flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides etc. complete all as specified and as directed.
M&L for walling of random rubble, uncoursed, well bounded, laid dry in retaining walls, abutments and similar work built in CM (1:6) etc. complete all as specified and as directed.
M&L for PCC type C1 (1:3:6) ( using 20mm graded stone aggregate) as in coping and like including weathering slightly rounded or chamfered angles and throating etc. complete all as specified and as directed.
M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 etc. complete all as specified and as directed.
M&L for cement concrete Type C-1 (1:3:6) (using 20mm graded stone agg) as in Bond Stone and the like including weathering slightly rounded or chamfered angles and throating etc. complete all as specified and as directed.
M&L brick work with sub class' B' bricks(using old size burnt bricks) straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 etc. complete all as specified and as directed.
All as per item No.27.00 (here-in-before) but except brick built in cement mortar (1:6) .
M&L for 10 mm thick ceiling plaster in CM (1:4) on fair faces of concrete surfaces etc. complete all as specified and as directed.
M&L for 15mm thick rendering in two layers of 10mm thick and 5mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished fair and even, using water proofing compound in top layer , complete all as specified and as directed (NOTE: WPC will be measured and paid separately)
M & L rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete work even and smooth without using extra cement etc. complete all as specified and as directed.
Supply only integral water proofing compound ( ISI marked ) etc. complete all as specified and as directed.
M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in roof kerbs / benching / coved fillets etc rounded or chamfered on edges etc. complete all as specified and as directed.
Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m etc. complete all as specified and as directed.
M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following etc. complete all as specified and as directed.- (a)10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc(NOTE: WPC will be measured and paid separately) (b) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. (c) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. (d) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame. (e) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.
Material and labour for precast Cement Concrete chequered tiles of size 200 x 200 x 25mm thick as in floor, set and jointed in neat cement slurry and pointed with grey cement laid over and including 20mm thick screed bed in CM (1:4) and 75mm thick PCC 1:4:8, type D2, (using 40mm graded stone aggregate) as in sub base of floor etc. complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base to floor finished fair & even all as specified and directed by Engineer-in-charge.
M&L for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floor topping of hard standing finished even and smooth without using extra cement etc. complete all as specified and as directed.
M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'A' in 100mm thick concrete slab of hard standing etc. complete all as specified and as directed.
M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed 15 mm thick in CM (1:6) etc. complete all as specified and as directed.
All as per item no 41.00 (here-in-before) but as in skirting over and including 10mm thick baking coat in CM (1:4) .
M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed 15mm thick in CM 1:6 etc. complete all as specified and as directed.
M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc. complete all as specified and as directed.
M&L for vitrified ceramic tiles 10mm thick exc 0.18 sqm but n.exc 0.36 Sqm each in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed 15mm thick in CM 1:6 etc. complete all as specified and as directed.
M&L for Vitrified ceramic tiles 10mm thick n.exc 0.36 Sqm each in vertical surface as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick bedding layer in CM 1:4 etc. complete all as specified and as directed.
M&L for 25 mm thick cement concrete (1:2:4) type B-1 (using 20 mm graded stone agg) as in floor for laying floor finishes etc. complete all as specified and as directed.
M&L for Granite (of any type) work (table rubbed and polished) 20mm thick in flooring over & including 15mm thick screed bed (bedding layer) in CM 1:6, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including cutting and polishing (half mirror polish i.e. half granite polish as per local trade practice) etc. complete all as specified and as directed.
M&L cement concrete type C-2 (1:3:6) (using 40 mm graded stone agg) as in surface channels and drains etc. complete all as specified and as directed.
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds etc. complete all as specified and as directed.
All as per item No 50.00 (here-in-before) but exceeding 30 cm inner girth upto and including 25 mm girth or part thereof etc. complete all as specified and as directed.
M&L for Neeru finish to plastering as specified etc. complete all as specified and as directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.
M&L for Reinforced cement concrete Type B-1 (1:2:4) (using 20 mm graded stone aggregate)in slabs,shelves and like etc. complete all as specified and as directed.
M&L for Reinforced cement concrete Type B-1 (1:2:4) (using 12.5 mm graded stone aggregate) in chajjas and balconies etc. complete all as specified and as directed.
Form work to shelves and the like including edges, surfaces finished rough etc. complete all as specified and as directed.
M & L Formwork to chullah hoods, chajjas, troughs and similar items including edges fair finish etc. complete all as specified and as directed.
S&F Mild Steel TMT bar 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia etc. complete all as specified and as directed.
S&F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia etc. complete all as specified and as directed.
M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces etc. complete all as specified and as directed.
M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brushing and applying one coat of white wash on wall etc. complete all as specified and as directed. White washing shall be carried out using DDL..
All as per item No. 61.00 (here-in-before) but on ceiling.
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of primer on walls all as specified & directed by Engineer-in-Charge
All as per item No 63.00 (here-in-before) but on ceilings .
M&L preparation of newly plastered surface of any description and applying two coat of plastic emulsion paint complete all as specified and as directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge.
M&L for prepration of newly plastered surfaces of walls and applying two coats of weather coat exterior emulsion over a coat of primer , complete all as specified and as directed.
M&L preparation old plastered surfaces of wall and applying one coat oil bound distemper on walls complete all as specified & directed.
All as per item No. 68.00 (here-in-before) but on ceiling.
Preparation of old decorated plastered surface of any description and applying one coat of plastic emulsion paint complete all as specified and as directed.
M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified & directed.
M&l for preparation old decorated surfaces on wall and applying one coat of weather exterior acrylic emulsion wall paint, complete all as specified and as directed.
Complete removal of exisitng treatment on walls all as specified and as directed.
All as per item No. 73.00 (here-in-before) but on ceiling
M&L for prepration of old decorated surfaces and applying two coats of white wash on walls, fins, facia. Chajja etc , complete all as specified and as directed.
All as per item No. 75.00 (here-in-before) but on ceiling
M&L for preparation of old surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge.
M/L for 2 mm thick Birla white putty/JK white wall care putty on walls etc. complete all as specified and as directed.
M&L for preparation of old plastered surfaces of walls including removal of existing treatment and applying two coats of distemper oil emulsion of approved tint all as specified .
All as per item No 79.00 (here-in-before) but on ceilings .
M&L preparation of old plastered surfaces of walls including removal of existing treatmentand applying two coats of plastic emulsion paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces over 10 cm width/girth including removal of existing treatment and applying two coat of synthetic enamel paint etc. complete all as specified and as directed.
M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying one coat of synthetic enamel paint etc. complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood over 10 cm width/girth and applying one coat of synthetic enamel paint etc. complete all as specified and as directed.
M&L for preparation of old painted steel surfaces not exc. 10 cm width/girth and applying one coat of synthetic enamel paint etc. complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description, n exc 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer etc. complete all as specified and as directed.
M&L for Solar control film 25 micron relfective type (garewater sun control or equivalent) etc. complete all as specified and as directed.
S&F 18/19mm prelaminated particle board, interior grade , preliminated both side with decorative choice limination fixed with screws to timber frame work etc. complete all as specified and as directed.
S&F 12mm prelaminated particle board, interior grade , preliminated both side with decorative choice limination fixed with screws to timber frame work etc. complete all as specified and as directed.
S&F 12mm thick Veneered decorateive plywood, grade 1 (with BWR resin) with decorate face veneers on one faces; fixed with nails to timber frame work as wall panel etc. complete all as specified and as directed.
S&F Plain, solid, straight Chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together withglue pinned at joints, supplied & fixed etc. complete all as specified and as directed.
Taking down chowkhat or frame not exc 1.5 sqm each (with out taking off shutters from the frame) etc. complete all as specified and as directed.
Taking down chowkhat or frame exc 1.5 sqm not exc 4 sqm each (without taking off shutters from the frame) etc. complete all as specified and as directed.
Taking down shutters of any description n. exc 1 Sqm each etc. complete all as specified and as directed.
Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each etc. complete all as specified and as directed.
Taking down & refixing shutters of any description n exc 1 Sqm each in same opening etc. complete all as specified and as directed.
Taking down & refixing shutters of any description exc 1 Sqm and n exc 2 sqm each in same opening etc. complete all as specified and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete etc. complete all as specified and as directed.
Easing of door/windows shutters for easy closing or opening leaf tightening of hinges or changing the position of hinges adjustment of tower bolt, sliding bolt etc. complete all as specified and as directed.
M&L butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm thick etc. complete all as specified and as directed.
S&F 100 mm size cadmium plated stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed.
M&L butt hinges, medium weight 75 mm long size etc. complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long etc. complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolt of extruded section and fixed 150 mm long etc. complete all as specified and as directed.
S&F Aluminium handle cast type anodised 150 mm long etc. complete all as specified and as directed.
S&F 100mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed.
S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section (250 mm long) etc. complete all as specified and as directed.
S/F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section (300 mm long) etc. complete all as specified and as directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm etc. complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing fixing new ones etc. complete all as specified and as directed.
M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. .5 sqm each pane complete all as specified and directed upto triple storey .Rate for scaffloding/ladder is included in this item.
M&L plain fillets 2nd class Hard wood exc 13 & n exc 25 Sqcm Square or rectangular in section, wrought secured with nails or barbs etc. complete all as specified and as directed.
S/F 2nd class hard wood scantling as in purlins rafters ,& framed work etc clean sawn etc. complete all as specified and as directed.
S&F 140mm Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed etc. complete all as specified and as directed.
S&F Brass hasp and staple,125mm safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws etc. complete all as specified and as directed.
S&F 40mm dia, brass cupboard knobs fixed with nut, screw and washer of mild steel, bright finished etc. complete all as specified and as directed.
S&F in repairs for Draperly rod /Harrison rails of stainless steel of 20mm dia with fixing brackets , stops, rollers and rings etc. complete all as specified and as directed.
Taking down existing steel sliding shutters size not excedding 4.00 x 5.00 m with all connecting items and repairs/ replace the locking arrangements, greasing, tightening of helical wire spring including welding wherever required, oiling, etc complete and make in serviceable condition and refixing in the same opening complete all as specified and directed by Engineer-in-Charge. (NOTE :- (i) Lock plate with locking arrangement and shall be measured and paid for separately. (ii) Spring will be measured and paid for separately (iii) Supply only unserviceable items shall be measured and paid separately under respective items.
S&F Ball bearing for steel sliding shutters etc. complete all as specified and as directed.
S&F Saftey lever locks mild steel with 4 leavers for rolling shutters etc. complete all as specified and as directed.
M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. complete all as specified and as directed.
M&L Taking down and Servicing, re-securing glazed aluminium door .exc 1.5 Sqm but n.exc 4 sqm each by easing, adjusting, securing of styles, mullions, pivots, cleats fittings including replacing worn out rubber packing, glazing clips, aluminium anodised snap beading, servicing locks including fixing only aluminium mongries etc and refixing in the same opening complete as required and directed .(Note : Defective Aluminium mongeries fitted/replaced shall be measured and paid seperately)
S&F Powder coated of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
S&F Sheet glass ordinary quality 4.8 mm thick and glazing in aluminum door in squares exc 0.5 sqm each etc. complete all as specified and as directed.
S&F Sheet glass ordinary quality 4.8 mm thick grounded or obscured or frosted , on one side and glazing in aluminum door in squares exc 0.5 sqm each etc. complete all as specified and as directed.
S&F Sheet glass ordinary quality 4.00 mm thick and glazing in aluminum window in squares n exc 0.5 sqm each etc. complete all as specified and as directed.
M&L stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm & fixed with stainless steel wire staples etc. complete all as specified and as directed.
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc. complete all as specified and as directed.
S&F 4 levers brass mortices lock, vertical type, size 100mm etc. complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification etc. complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification etc. complete all as specified and as directed.
Taking up or down steel tubing and connections with all fittings for 15 mm bore GI tubing etc. complete all as specified and as directed.
Taking up or down steel tubing and connections with all fittings for 20 mm bore GI tubing etc. complete all as specified and as directed.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing etc. complete all as specified and as directed.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing etc. complete all as specified and as directed.
M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc. complete all as specified and as directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc. complete all as specified and as directed.
S&F in repairs rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including 20mm dia ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia etc. complete all as specified and as directed.
Demolition of AC/Salt glazed ware pipes and fittings upto 100mm etc. complete all as specified and as directed.
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc. complete all as specified and as directed.
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc. complete all as specified and as directed.
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. complete all as specified and as directed.
S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. complete all as specified and as directed.
S&F of 110mm dia PVC (SWR) bends etc. complete all as specified and as directed.
S&F 75mm PVC(SWR) bends any radius with access door etc. complete all as specified and as directed.
S&F of 75 mm dia PVC (SWR) Vent cowl etc. complete all as specified and as directed.
S&F of 110 mm dia PVC (SWR) Vent cowl etc. complete all as specified and as directed.
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F bands , straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stays) , heavy , for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts , wall ties, hooks for hanging fans, plain angles cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps , palte washers and similar small articles conforming to Fe 290 , Gde E- 165 etc. complete all as specified and as directed.
S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 100 mm CI 'P' trap etc. complete all as specified and as directed.
S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover etc. complete all as specified and as directed.
S&F in repair PVC flushing cistern syphonic action type, 10 liters capacity, low level white with inlet ball valve, float and handle including bracket including PVC flush pipe, 32mm dia as fixed in repairs complete all as specified and directed.
S & F 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/Sqcm fixed complete to walls, ceilings or in floor etc complete all as specified and directed.
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc. complete all as specified and as directed.
S & F in repairs pillar tap of 15 mm dia , chromium plated fancy type , screwed for iron pipes etc. complete all as specified and as directed.
S&F in repairs vitreous china half stall urinal white, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia etc. complete all as specified and as directed.
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed etc. complete all as specified and as directed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated (concealed type long shank) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed etc. complete all as specified and as directed.
S&F in repairs for 15mm dia of pipe Angle valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed etc. complete all as specified and as directed.
Supply and fixing 20 mm dia gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed etc. complete all as specified and as directed.
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers etc. complete all as specified and as directed.
S& F in repair swivel shower of CP any size for fixing with 15 mm pipe (min weight 40 gms) incl shower arms 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (min weight 40 gms) etc. complete all as specified and as directed.
Supply and fixing in repairs of soap-dish chromium plated etc. complete all as specified and as directed.
S&F in repairs grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) etc. complete all as specified and as directed.
S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screws etc. complete all as specified and as directed.
S/ F in repairs towel Ring of PTMT fixed with and including Chromium plated Brass Screws and wooden/ plastic cleats ( Minimum weight 90 gms) etc fixed in kitchen etc. complete all as specified and as directed.
S&F in repairs PVC mounted 5mm thick bevelled edge looking mirror 550 x 400mm including taking down old fixed etc. complete all as specified and as directed.
S&F in repairs PVC Shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) etc. complete all as specified and as directed.
S&F for depth 0.70m – 1.65 m, DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid on 150 mm thick PCC 1:3:6 type C-2 including packing under and haunching against the sides of pipes bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional etc. complete all as specified and as directed.
Cutting into existing manhole/soakwell/septic tank making good to pipe and benching cutting out existing benching for and forming branch channel (half round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for internal dia size 150mm etc. complete all as specified and as directed.
M & L Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop vulve boxes, gate stops,parts of ranges, bulusters and similar articles exc 5kg each etc. complete all as specified and as directed.
S&F MS Steel screw bolts (machine made) with hexagonal or square heads at one and screwed at other or screwed both ends each scrwed and to be fitted with washer and one hexagonal or square nut, exc 10cm and n exc 15cm long etc. complete all as specified and as directed.
All as per item No 173.00 herein before but exc 5 cm and n exc 10cm long
Dismantling steel structural work etc complete all as specified and directed .
M&L for repair to rolling shutter gear operated of area exceeding 8 Sqm each and greasing and overhauling complete all as specified and directed
S&F steel rolling shutters of lath thickness 1.25 mm , gear operated type with bevel gear box and crank handles area exceeding 8 sqm each all as specified including top cover, anchoring rod, hasp & staple including cutting and removing the existing corroded laths of rolling shutters and inserting new laths of 1.25 mm thick including necessary bending , revetting etc with one shop coat of red oxide zinc chromate primer complete all as specified and directed
Dismantling damaged/rusted MS framed work including watch tower pedestal railings , ladders etc by gas cutting or by other means carefully without damaging the structure upto a height of 10 mtr from GL of watch tower erect on GL etc. complete all as specified and as directed.
S&F MS framed work by welding/bolting wherever required in Compound girders and stanchions , lattice girders , aerial masts , staging for water tanks and the like including caps, bases , splices etc built up from two or more beam or channel sections or angles with plates , including all lattice bars , stiffeners , gusset plates etc upto a height of 10m from GL as in watch tower erected on ground etc. complete all as specified and as directed.
S&F mild steel framed work as in grill, grating etc with end of bars shouldered and /or riveted or tonged into spikes, frame guard bars barrel iron doors, ladders, frame balusters, walk ways, railing. Grame work of water tanks and similar works confirming to Fe 410-0 or Fe 310-0 etc. complete all as specified and as directed.
S&F MS Plates (Plain or chequred) channels , square cut or notched (ordinary and counter sunk) forming holes with rivited , bolted or welded attachments .as in watch towers and similar structure upto 10 m height etc. complete all as specified and as directed.
Demolition of laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.
Demolition of reed lathing single or double including battens and plaster or chicken wire lathing etc. complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:4 on one side of lathing finished even and smooth without using extra cement etc. complete all as specified and as directed.
M&L for rendering 12 mm thick in CM 1:6 on other side of lathing finished even and smooth without using extra cement etc. complete all as specified and as directed.
S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple etc. complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick exc 0.11 Sqm but n exc 0.18 Sqm set and jointed in neat cement slurry laid over and including 15mm thick screed bed of CM 1:6 ,and pointed in white/coloured cement to match the shade of tiles etc. complete all as specified and as directed.
All as per item No 187.00 here-in-before but in skirting over 10 mm thick backing coat in CM (1:4).
M&L for 40 mm thk PCC (1:2:4) type B-1 (using20mm graded stone agg) as in leveling course complete all as specified and directed.
M&L for brick work in cement mortar (1:4) using sub class 'B' bricks(using old size burnt bricks) straight or curved on plan exc 6.0 m mean radius etc. complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks (using old size burnt bricks) straight or curved on plan in any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed
M&L Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,including one shop coat of primer etc. complete all as specified and as directed.
S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and directed.
S&F for factory made second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc. complete all as specified and as directed.
S&F for factory made second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc. complete all as specified and as directed.
S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc. complete all as specified and as directed.
M&L for two coats of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described etc. complete all as specified and as directed.
M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.
M & L for writing letter for figures (block, Roman, italic or indian) n exc 30 Nos CM high with thick synthetic paint with out bursh marks, if necessary repainted until the desired result is obtained etc. complete all as specified and as directed.
S&F waste pipe 750 long for WHB or sink in repairs etc. complete all as specified and as directed.
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair, complete all as specified and directed.
M & L cement concrete type D-2, 1:4:8, using 40mm graded aggregate as in fillings for sunken portion and mass concrete etc. complete all as specified and as directed.
S&F(SWR) 110mm bore junction single (single T) equal and unequal with access door in repair etc. complete all as specified and as directed.
S&F PVC (SWR) branch piece, double (double Y) equal or unequal 110mm bore in repair etc. complete all as specified and as directed.
Re-fixing only 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls after cleaning the old pipe all as specified and directed.
All as per item No 206.00 (here-in-before) above but bore of pipe 75 mm dia fixed to walls.
S & F stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, as fixed in repairs complete all as specified and directed.(Make: Nirali (Kitchen Queen)/Dimond/Neelkanth/ Prayag/Blue Star).
Supply and fixing in repair stainless steel (conforming to AISI-304 grade) plate rack of overall size 750mm x 600mm x 254 mm or equivalent made of 1mm thick stainless steel sheet fixed on CP cantilever brackets, complete all as specified and as directed. Make : Jayna Cat No SBSD-05 or equivalent approved make.
M & L for cement concretetype C-2, (1:3:6) (40mm graded stone aggregates) as in surface channels and drains etc. complete all as specified and as directed.
Dismantling Asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and as directed.
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame etc. complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.
(a) One light/Fan/Exhaust point controlled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No- 215.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5 Amp etc. complete all as specified and as directed.
M&L for Socket outlet, 2 in 1, 3 pin 5A flush type etc. complete all as specified and as directed.
M&L Switch socket combination 2 in 1, 5A flush type etc. complete all as specified and as directed.
M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type etc. complete all as specified and as directed.
M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc. complete all as specified and as directed.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock etc. complete all as specified and as directed.
Taking down carefully sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit lengthetc. complete all as specified and as directed.
All as per item No 10.00 but sub main wiring with two runs of 2.5 Sq mm and one run of 4 Sq mm for earth wire NOTE:- two runs of 2.5 Sq mm + one run of 2.5 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length etc. complete all as specified and as directed.
M&L for LED flood light 120 Watt capacity with high luminious efficiency made up of Epoxy powder coated pressure die cast aluminium housing with elegantly designed heat sink for efficient thermal management, sturdiness and excellent corrosion resistant and lens embedded PC cover having Top Opening seperate driver compartment with IP 66 protection and High quality toughened glass IK07 with 10 KV Built in surge protection device and all connected accessories including suitable size of serive bracket housing nuts and bolts etc and making electrical connection etc. complete all as specified and as directed.
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
Repair/Replacement for Switch piano flush type single pole, one way 5 Amp etc. complete all as specified and as directed.
Repair/Replacement for Socket outlet, 2 in 1, 3 pin 5A flush type etc. complete all as specified and as directed.
Repair/Replacement Switch socket combination 2 in 1, 5A flush type etc. complete all as specified and as directed.
Repair/Replacement Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type etc. complete all as specified and as directed.
Repair/Replacement for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc. complete all as specified and as directed.
M&L for 20 Watt LED, 4', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.
Repair/Replacement for 20 Watt LED, 4', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.
Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and etc. complete all as specified and as directed.
M&L for replacement of 40/42 watt LED 2' x 2' recess mounte ceiling light fitting extruded aluminium heat sink propvided for efficient heat dissipation & integrated electronic drive etc with all accessories internally pre wired incl taking down old unsv etc. complete all as specified and as directed.
M&L for VTPN 4 way DPX3,double door 415 Volts, suitable for flush mounting and surface mounting with 250 A copper Bus bar for each phase with 2 Netural bar, 2 earth bar and cable ties for cable management, IP 43 with provn for DPX MCCB 160 Amps as incomer and single pole MCB TP/SP as outgoing incl taking down of DBs etc. complete all as specified and as directed.
Supply and fixing MCCB 3 Pole , 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete with connection testing and commissioning etc. complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs etc. complete all as specified and as directed.
M&L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps etc. complete all as specified and as directed.
Supply and fixing MCB SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning etc. complete all as specified and as directed.
Supply and fixing MCB SPN 40-63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning etc. complete all as specified and as directed.
Supply and fixing MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning etc. complete all as specified and as directed.
Rameshwar Prasad
commercial enterprises
KAILASH KUMAR LADHA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .