Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹4.7 LAccepted-AOC 1001 63 SHALIMAR GARDEN ISMAILGANJ NEAR INDIRA NAGAR SECTOR 08 CROSSING LUCKNOW 226016 | LUCKNOW | UTTAR PRADESH | 226016 | L2 | Accepted-AOC Being Lowest | |
| 2 | L3₹5.5 LRejected-Finance 41B 1H JAYANTIPUR PREETAM NAGAR ALLAHABAD | L3 | Rejected-Finance Being not lowest | |
| 3 | L4₹5.5 LRejected-Finance MOHAMMADPUR CHAIL KAUSHAMBI UTTAR PRADESH 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | L4 | Rejected-Finance Being not lowest | |
| 4 | L5₹5.5 LRejected-Finance | L5 | Rejected-Finance Being not lowest | |
| 5 | L6₹5.8 LRejected-Finance 02 JAMEEWAR COMPLEX RING ROAD HANUMAN NAGAR GONDIA MAHARASHTRA 441614 | GONDIA | MAHARASHTRA | 441614 | L6 | Rejected-Finance Being not lowest |
Tender Value
₹8 L
EMD Value
₹16,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Pranav, AGE (I)
AGE (I) Manauri Prayagraj-212212
REPAIR / MAINT OF FIRING RANGE, SAND FILLING AND CONNECTED WORKS AT AF STN MANAURI
2023_MES_599102_1
9069/E8
Open Tender
Civil Works
Item Rate
270 days
Manauri
As per NIT
7 documents required · 7 mandatory
₹500
AGE (I) AF Manauri
₹16,000
Yes
30 Jun 2023
29 May 2023
28 Jun 2023
29 May 2023
26 Jun 2023
13 Jun 2023
Amount
S&F in replacement galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type if standard rail straining bolts including securing or tying at crossings with and provision of galvanised complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description (i.e wind tie etc) not otherwise provided for etc complete all as specified and directed.
S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F Rolled Mild Steel Framed work as in doors or Gates, fencing post, support on wall of angle or other section confirming to Fe 410 -W (Gde-, E- 250) A quality-with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.
M&L in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and directed.
M&L for preparation of old steel surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed.
Taking down cement plaster on brick or stone surface of wall built in cement sand mortar including racking out joints, hacking for key, scrubbing down with water etc with including M&L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new surface and applying two coat of cement base paint over a coat of primer all as specified and directed.
Taking down cement plaster or cement lime plaster, any description from wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L rendering 15mm thick cement plaster 1:6 on other than fair faces of brickwork or concrete surface and finishing even and smooth without using extra cement all as specified and directed.
M&L for preparation of new surfaces and applying 2 coats of OBD over a coat of primer all as specified and directed.
M&L for preparation of old surface and applying two coat of cement base paint complete all as specified and directed.
M&L for preparation of old surface and applying two coats of Oil bound distemper on walls complete all as specified and directed.
M&L for preparation of old painted surfaces and applying one coat of Oil bound Distemper on walls complete all as specified and directed.
M&L for preparation of old plastered surface of walls including cornices and apply two coat of white wash complete all as specified & directed.
M&L for saw dust and sand in 1:2 ratio for filling, spreading and levelling in layers n. exc. 300 mm thick and well ramming including watering as required, complete all as specified and directed.
Dismantling of cement concrete tiles of any desciption and any thickness in floors, laid, bedded and pointed in any mortar complete all as specifed and directed.
M&L providing chequered cement concrete coloured tiles glossy finish 25cm x 25cm x 22 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment laid over and including screed bed or bedding layer 20 mm thick in cm 1:4 as in floors complete all as specified and directed.
Demolition of un-reinforced Cement Concrete in ground floors and pavings n. exc. 15 cm thickness ( below or above GL) complete all as specified and directed.
M&L for 40 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in floor finished even and smooth with wire extra cement complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in copping etc complete all as specified and directed.
M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) finished even and smooth with using extra cement etc complete all as specified and directed.
Demolition of cement concrete (reinforced ) of any description and in any position complete all as specified and directed.
M&L providing pre-cast RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cover slabs set in CM 1:4 including necessary form work complete all as specified and directed.
M&L mild steel deformed TMT bar 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Demolition of Brick works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L for brick work with subclass “B” Old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.
S&F galvanised (zinc coating) concertina coil 610mm dia (in stretched position) hot dip galvanised strip of 2.5mm dia core wire, weight not less than 9.5Kg/coil, 22 mm blade length, 14mm barbed width medium blade barb, distance between barbs 35mm c/c, with hardened galvanized steel clip fixed over Barbed wire with existing angle iron including dismantling of existing coil complete and directed. Note :- (a) Horizontal barbed wire and angle iron support will be measured and paid separately under relevant item. (b) Measurement will be made for stretch length.
S&F galvanised (zinc coating) concertina coil 1050 mm dia (in stretched position) with heavy galvanized strip of 2.6mm dia core wire, weight not less than 14.5Kg/coil, 22 mm blade length, medium blade barb, distance between barbs 35mm c/c, with hardened galvanized steel clip fixed over Barbed wire with existing angle iron including dismantling of existing coil complete all as specified & directed. Note :- (a) Horizontal barbed wire and angle iron support will be measured and paid separately under relevant item. (b) Measurement will be made for stretch length.
S&F in replacement for chain link fencing MS galvanized, 3.14mm dia 75x75mm mesh fixed to RCC post including securing or tying with GI MS wire, staples etc complete all as specified and directed.
Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri.
RK ENTERPRISES
Bharat Trading Company
HARSH ASSOCIETES
M/S SATISH KUMAR
M/S R S Traders
HIMANSHU TRADERS
GITANSH CONSTRUCTION CO.
M/S VIJAY SINGH
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .