UG cable Erection around Avinashi Lingeswar Temple

Earth work excavation in all kinds of soils within an Initial lead of 10 m and lift of 2 m in trenches (narrow pits)

Cutting open the black topped road surface including the cost for providing signal boards, lights, watch and ward to regulate the traffic, taking all precautions to protect the men, materials and the public from any possible accidents, etc., using JCB / air compressor / drilling machines, etc., wherever necessary at anytime throught the day including taking all precautions to prevent any damage to the Telecom and water lines

Providing crusher dust instead of sand bedding with good quality to a depth upto 150 mm (6") including cost of materials, labour, lead, lift, etc., complete

Refilling with excavated earth, consolidating in layers and the top brought for line with the existing surface including cost of labour, lead, lift, etc., complete

Laying of PCC (1:3:6) using 20 mm HBG metal over the casing PVC pipes provided at the road / drainage crossings streets in cables ducts etc., including cost of all materials, lead, lift, labour charges, watch and ward, danger light, signal board, etc., complete

Supplying of 11 KV RCC V troughs and laying over the UG cable to proper grade and alignment inside the cable trench, printing letters of not less than 75 mm on either side of the troughs as directed by the Engineer incharge of works including the cost for all materials, transporting of troughs from the source to the destination upto 10 kms, stenciling, paints, brushes, all leads and lifts, etc., complete

Supplying and laying of 160 mm dia PVC pipe of approved quality and reputed make for road and drainage crossing for the HT cable laying at road drainage crossing including cost of all materials, labour, lead, lift, etc., complete

Uncoilng and laying of 11 KV cable in the excavated trench including drawing the cable through RCC / GI / PVC pipes wherever necessary at road crossings etc., without any damage, including transporting of cables, tools and plants, labour, lead, lift, etc., complete

Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading, leads and lifts, etc., complete

Supply of erection of cable marker in RCC (1:2:4) using 20 mm HBS metal of size 0.3x0.6 m and of 100 mm thick, engraving letters "TNEB UG Cable", painting the engraved letters, fixing the cable marker in a bed of PCC (1:3:60) using 20 mm HBS metal of size 0.45x0.3x0.45 m including cost of all materials, labour, transporting to the destination, all leads and lifts, etc., complete

Providing watch and ward required at site as directed by the Engineer incharge

Erection of 11 KV 3x300 sq. mm straight joint kits

Erection of 11 KV 3x300 sq. mm OD end termination kits & 11 KV 3x120 sq. mm OD end termination kits

UG cable earthing by coil earthing

Earth work excavation in all kinds of soils within an intial lead of 10 m and lift of 2 m in trenches for cable trenches (narrow pits)

Cutting open the black topped road surface for a width of 0.6 m and depth of 1.2 m including the cost for providing signal boards, lights, watch and ward to regulate the traffic, taking all precautions to protect the men, materials and the public from any possible accidents etc., using JCB / air compresor / drilling machines etc., wherever necessary (at anytime throught the day) including taking all precautions to prevent any damages to the telecom and water lines

Providing crusher dust instead of sand bedding with good quality to a depth upto 150 mm (6") including cost of materials, labour, leads and lifts, etc., complete

Refilling with excavated earth, consolidating in layers and the top brought for line with the existing surface including cost of labour, lead, lift, etc., complete

RCC 11 KV V troughs laying over the UG cable to proper grade and alignment inside the cable trench, printing letters of not less than 75 mm on either side of the troughs as directed by the engineer incharge of works including the cost for all materials, transporting of troughs from the source to the destination upto 10 kms, stenciling, paints, brushes, all leads and lifts, etc., complete

Supplying, laying, joining and fixing in position cement pipes of 225 mm dia in size in reexcavated cable trench as directed by the Engineer incharge at site, including the cost of tope, seady the end, with cement martar labour, labour, lead, lifts, etc., complete

Uncoiling and laying of LT cable in the excavated trench including drawing the cable through RCC / GI / PVC pipes wherever necessary at road crossings etc., without any damage, including transporting of cables, tools and plants, labour, lead, lift, etc., complete (120 & 240 sq mm)

Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading, leads and lifts, etc., complete

Supply and erection of cable marker in RCC (1:2:4) using 20 mm HBS metal of size 0.3x0.6 m and of 100 mm thick, engraving letters "TNEB UG Cable", painting the engraved letters, fixing the cable marker in a bed of PCC (1:3:6) using 20 mm HBS Metal of size 0.45x0.30x0.45 m including cost of all materials, labour, transporting to the destination, all leads and lifts, etc., complete (Every 100 Mts)

Laying of LT cable of all sizes for service connection including excavation of trench, laying of cable, refilling of trench & termination of cable complete (25 sq mm & 16 sq mm)

Construction of RCC pedestal of size 0.75x0.25x1.05 m (2 Nos) for fixing 6 way pillar box with 15.76 kgs of steel reinforcement in 0.394 m3 of RCC (1:2:4) mix concrete using 20 mm HBS metal, plastering (1:5) 12 mm thick around the pedestal colour washing two coats over one coat of primer using white cement including cost of all materials, labour, transportation of all materilas of size, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift, etc., complete, 6 way pillar box

Construction of RCC pedestal of size 0.60x 0.25x1.05 m (2 Nos) for fixing Mini / 4 way pillar box with 13.88 kgs of steel reinforcement in 0.315 m3 of RCC (1:2:4) mix concrete using 20 mm HBS metal, plastering (1:5) 12 mm thick around the pedestal colour washing two coats over one coat of primer using white cement including cost of all materials, labour, transportation of all materilas of size, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift, etc., complete, 4 way pillar box FRP

Construction of RCC pedestal of size 0.60x0.25x1.05 m (2 Nos) for fixing Mini / 4 way pillar box with 13.88 kgs of steel reinforcement in 0.315 m3 of RCC (1:2:4) mix concrete using 20 mm HBS metal, plastering (1:5) 12 mm thick around the pedestal colour washing two coats over one coat of primer using white cement including cost of all materials, labour, transportation of all materilas of size, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift, etc., complete, Mini pillar box

Painting two coats of enamal emulsion paint over one coat of metal white primer for 6 way pillar boxes by using spray paint including cost of materilas, lead, lift, labour, etc., complete

Painting two coats of enamal emulsion paint over one coat of metal white primer for mini pillar boxes by using spray paint including cost of materilas, lead, lift, labour, etc., complete

Supplying and pasting of stencil cut stickers with good adhesives with letters showing "TNEB", "440 V" and "Danger" with Skull and Bone symbols, etc., including cost of all materials, lead, lift, labour, etc., complete

Pillar box coil earthing

Transporation from road side to pole pit, erection, excavation, loading & unloading of PSC 9.0 m pole

Transporation from road side to pole pit, erection, excavation, loading & unloading of PSC 8.0 m pole

Erection of stay set complete per stay with excavtion of stay pit and backfilling

Fixing of tapping channel cross arm

Fixing of 11 KV disc with metal parts

Fixing of 11 KV TI fitting

Fixing of LT 3 phase cross arm

Fixing of LT single phase cross arm

Fixing of LT shackle with metal parts

Fixing of aluminium knob

Earthing of pole with GI wires 4 or 6 SWG by coil earthing

Sleeve concreting with 1:4:8 mix using 40 mm jally including curing (material + labour)

Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit

Dismantling of conductor of size upto 7/2.59 mm including transporting the conductors to the nearest road side and stocking in coils

Dismantling of conductor of size above 7/2.59 mm and upto 7/3.35 mm including transporting the conductors to the nearest road side and stocking in coils

Dismantling of conductor of size 7/4.09 mm including transporting the conductors to the nearest road side and stocking in coils

Dismantling of LT pin with insulator

Dismantling of LT shackle with metal parts

Dismantling of aluminium knob

Dismantling of tapping channel cross arm

Dismantling of HT / LT TI fitting

Dismantling of V cross arm 3.5 feet or 4.5 feet

Dismantling of guarding cross arm

Dismantling of LT 3 phase cross arm

Dismantling of LT single phase cross arm

Disconnection & reconnection of 3 phase service connection

Disconnection & reconnection of single phase service connection

SUB TOTAL (Items 1 to 58)

Matha Engineering Company

sri vinayagaa and co

VAKMA USA INFRA

Harikrishna electricals