Making of earth pit, watering arrangement for entire earth pits of sub-station and making of shed for protection of capacitor bank at 11KV/3.3 KV sub-station yard of SDOCM

Amount

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 20 mm nominal outer dia Pipes

Providing and fixing 25mm X 5mm G.I.strip on surface or in recess for connections etc. as required

Cutting of GI strip

Welding of GI strip

Brick work with clay flyash F.P.S. brick.(non modular) brick of classdesignation 7.5in superstructure above plinth level in cement mortor 1:4 (1 cement : 4 coarse sand) for making earth pit sump (24 Nos x0.45=10.8 cum) and brick work for foundation (3x2x5=3cum)

Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required 3 mtr x 2 mtr x 0.5mtr=3 cum

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete structural steel ms angle size 50x50x6mm 4 nos x 10'x40',5 nos x 13'=65',4nos x 16'=64',6 nos x 6'= 36', 8nos x 2'=16',Total=221'=67.36mtr x 4.72kg/mtr=317.93kg,MS plate 25 x5 x12nos x1 '=12'x.30kg/ft= 3.60kg

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required1.00 mm thick with zinc coating not less than 275 gm/m² top rofing 6 mtr x 5 mtr=30 sqm

Total impact of GST for the purpose of CTC

M/S KUMAR ENTERPRISES

M/s Arvind Kumar Singh