SPECIAL REPAIRS TO SMQ PHASE-II AT AF STN CHABUA UNDER GE(AF) CHABUA

Amount

SCH 'A' PART-I

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor/hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18sqm, in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile over 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

All as per item No. 3 here-in-before but on dado/skirting over 10mm thick screed bed in CM 1:4, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles (any shade) of size 350x250x7mm/ 450 x 300 x 7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:4) as backing coat and including dismantling of existing tiles and cement mortar bedding complete all as specified and as directed.

M&L for 20-25 mm thick machine cut kota stone slab used as in stair landing, floor, raiser and tread over cement screed bed for 15 mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid bedded and jointed in any mortar complete all as specified and directed.

M&L for 18 to 20 mm thick granite of any type/colour as approved, work (table rubbed mirror polished) edges rounded chamfered and bull nosed laid and fixed in any position (Vertical/Horizontal/Inclined) over cement screed over Cement mortar bedding in CM (1:4) 10 thick and painted in white or colour cement with admixer of pigment to match with shade of granite stone incl grinding and polishing complete all as specified and as directed.

Taking down cement plaster of any description from walls/ceiling including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM (1:4) on brick or concrete surfaces finished even & smooth, complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:6) on brick or concrete surfaces finished even & smooth, complete all as specified and as directed.

All as per item No. 14 here-in-before above but 10 mm thick in CM (1:3) on ceiling complete all as specified and directed.

M&L for two coats of white wash on newly plastered surface on ceiling including preparation of surface, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of cement base paint complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper including making good the surface by filling with 3mm wall care putty making surface even and smooth, complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil bound distemper including making good the surface by filling with wall care putty making surface even and smooth, complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surface of ceiling and applying one coat of white wash, complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position of framed work complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position of unframed work complete all as specified and as directed.

S & F rolled mild steel work in tubular trusses, rafters, purlins, posts , flat sections etc incl necessary welding/ fabrications using Fe 410-W (Gde E-250 Quality- A) complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or 'J' / 'L' hooks all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in plain sheet as in ridges, gutters , facia bd etc l, fixed with self tapping screws or 'J' /'L' hooks all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S & F for suspended false ceiling using anodized GI exposed ceiling suspension system of grid size 60 cm x 60 cm width main runner 'T' size 24 mm x 24 mm x 0.3 mm thickness and cores Tee of size 24 mm x 24 mm x 0.43 mm thick (using 60 cm x 60 cm E board classic 4 mm thick ceiling board) to be placed in grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing position for light fixtures, air conditioning diffuser and ducks, sprinkler, smoke detector etc. The main runner to be secured to structural soffit by hanger @ 1220 mm maximum C/C. The last hanger at the end of each runner should not be placed at more than 450 mm from the adjacent wall. Flush fitting 1200 mm cross 'T' to be inter locked between main runner @ 610 mm C/C so as to form 600 mm x 600 mm grid complete all as specified and as directed.

Demolition of existing PCC of any position and in any situation including existing worn out roof treatment and removing debris from the premises exceeding 50 mtr complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) on roof surface to maintain slope and to bring uniform surfaces complete all as specified and directed.

M & L for rendering 10 mm thick in CM (1:4) on concrete surfaces mixed with WPC @ 3% by weight of cement finished the surfaces fair and even complete all specified and directed. Note:- WPC shall be measured and paid separately.

Supply only water proofing compound complete all as specified and directed.

M&L for preparing the roof surfaces with coir/wire brushes for cleaning, dust free on dry surfaces and treated with water proofing treatment to RCC Roof with APP modified membrane non woven polyester reinforced with mineral finish on top to be laid by torch application method. On the dried surface applying one coat of approved bituminous primer @ 300 Grams/Sqm and applying a coat of hot blown bitumen 85/25 @ 1.20 Kg/Sqm on the primed surface and applying 3 mm thick APP membrane wt not less than 3.5 Kg / Sqm with torch application laid with over laps of 100 mm joints of traverse direction and 75 mm at longitudinal direction duly thermo fused by flame torch and applying a coat of hot blown bitumen 85/25 @ 1.20 Kg/Sqm on the membrane all as specified in application manual of the company all as specified and directed.

Taking down chowkats or frames with shutters w/o taking off shutters from the frames n.exc 1.5 Sqm each, complete all as specified and as directed.

Taking down chowkats or frames with shutters) w/o taking off shutters from the frames exc 1.5 Sqm and n.exc 4.0 sqm each each, complete all as specified and as directed.

S&F 125X60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F 105X60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

M&L for cement concrete type B-0 (1:2:4) 12.50 mm graded aggregate in as in filling of press steel Chowkats complete all as specified and as directed.

S&F 35 mm thick Flush shutters, Solid core construction, with on side prelaminated face core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F 35mm thick Glazed skeleton door shutters, open rebated and prepared to receive glass, Gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a), using IInd Class Hard wood complete all as specified and as directed.

Taking down shutter of any description exc 1.00 Sqm and not exc 2.00 sqm each, complete all as specified and as directed.

Refixing shutter of same opening any description exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded -sealed to the styles & rails with suitable PVC sheet beading, and joint together with solvent cement complete all as specified and as directed.

S&F 150mm long anodized aluminium handles, cast type, complete all as specified and as directed.

S&F for 150mm long anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F for 200 mm long anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F 300mm long aluminium anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S & F mild steel butt hinges 100mm size medium weight, complete all as specified and as directed.

S&F 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleats for fixing on walls/ floors of any description and in any position complete all a specified and as directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (2 No.) hinge type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and as directed.

S&F in repair 5.5mm thick plain glass, ordinary quality and glazing with oil putty/aluminium glazing clips in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290-Gde-E-165 complete all as specified and as directed.

S&F in repair rotational moulded polythene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top), double layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste/vent pipe 600mm long with fitting etc complete all as specified and directed.

Disconnecting existing tanks, setting aside (for lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc measured separately) capacity 500 ltrs complete all as specified and as directed.

Taking up or down 15mm dia steel tubing/PPR pipes and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm/25 mm dia steel tubing/PPR pipes and connections including cleaning for refixing or removal to store complete all as specified and as directed.

S&F GI tubing 15mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

S&F GI tubing 20mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

Refixing 15mm dia old steel tubing and connections in new or old positions (walls, ceiling, floors etc) Complete all as specified and directed.

Refixing 20mm dia old steel tubing and connections in new or old positions (walls, ceiling, floors etc) Complete all as specified and directed.

S & F in repair Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and as directed.

Cutting chases pinning in, making good to facing where required & pointing in CM 1:3 for concealed water tubing not exc 10 CM girth in brick wall complete all as specified and as directed.

Supply and fix, 3 (Three) layered, PPR (Polypropylene Random Co-Polymer) pipes, 20 mm OD, SDR 7.4 (PN 16), UV stabilized, inner anti microbial, fusion welded, having thermal stability for hot & cold water supply including PPR plain fittings and brass threaded fittings, laid in trenches etc complete all as specified and directed.

Taking down and re-fixing , 3 (Three) layered, PPR (Polypropylene Random Co-Polymer) pipes, 20 mm OD, SDR 7.4 (PN 16), UV stabilized, inner anti microbial, fusion welded, having thermal stability for hot & cold water supply including PPR plain fittings and brass threaded fittings, laid in trenches etc complete all as specified and directed.

Supply and fix, 3 (Three) layered, PPR (Polypropylene Random Co-Polymer) pipes, 25 mm OD, SDR 7.4 (PN 16), UV stabilized, inner anti microbial, fusion welded, having thermal stability for hot & cold water supply including PPR plain fittings and brass threaded fittings, laid in trenches etc complete all as specified and directed.

Taking down and re-fixing, 3 (Three) layered, PPR (Polypropylene Random Co-Polymer) pipes, 25 mm OD, SDR 7.4 (PN 16), UV stabilized, inner anti microbial, fusion welded, having thermal stability for hot & cold water supply including PPR plain fittings and brass threaded fittings, laid in trenches etc complete all as specified and directed.

S&F in 20mm gun metal, globe or gate valve, with iron wheel head screwed both ends for iron pipe and fix complete all as specified and as directed.

S&F in repair stainless steel plate rack of size 900 x 750 x 250 mm made of 1mm thick stainless steel all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick in kitchen or laboratory with plug washers, waste coupling and waste pipe and fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm excl taps waste chain, plug and porcelain stopper but including bracket, waste pipe and 32mm dia brass waste coupling/fitting complete all as specified and as directed.

S&F 15mm dia pillar taps cast copper alloy with capstan heads, chromium plated screwed down high, pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repair brass chromium plated over head shower rose for 125 mm size with long body fancy type including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair CP towel rail 20 mm dia D type, 60 cm long fixed with CP screws and rowel plug in wall, complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete, complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surfaces (in sunken portion) mixing WPC @ 3% by wt of cement and finished even & smooth without using extra cement, complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

M&L for applying evenly a tack coat of blown bitumen 85/25 @ 1.20 Kg/Sqm incl cleaning of surfaces, complete all as specified and as directed.

S&F polythene film, black 50 micron laid in floors and sides of walls complete all as specified and directed.

M&L for PCC (1:5:10) type E2 (using 40mm graded agg) as in filling and mass concrete in sunken portion, complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B1 (Using 20 mm graded aggregate) as in sub base of floor surface, complete all as specified and as directed.

S&F in repair vitreous china squatting pan "Orissa pattern" size 580 x 440 mm white integral foot rests incl 'P' or 'S' trap and connecting CI pipe 100 mm dia up to outer wall so as to connect PVC ( SWR ) pipe (excluding flushing cistern and flush pipe) but including syphon, complete all as specified and as directed.

S&F in repair 10 litre capacity PVC valve less syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle including brackets and long bend complete all as specified and directed.

S&F low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm for 50 mm bore complete all as specified and as directed.

S&F in repair 20mm dia decorated curtain rails, mild steel, chromium plated with fixing bracket stops, rollers etc, complete all as specified and as directed.

S&F in repair 15 mm dia bore bib taps cast copper alloy with, chromium plated fancy type with long shank & cup, capston head, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

Taking down and refixing 15 mm dia bore bib taps cast copper alloy with, chromium plated with long shank & cup, capston head, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock /stop cock screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.

Taking down and refixing 15 mm dia bore cast copper alloy chromium plated angle cock /stop cock screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.

S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type wall mixer with provision for overhead shower with and 115mm long bend pipe for cold & hot water complete all as specified and as directed.

Taking down and Refixing Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply only PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair PVC floor trap for 100 mm size including jointing to waste pipe with solvent cement complete all as specified and directed.

M&L 75mm thick PCC type C-2, 1:3:6 (using 40 mm graded aggregate) as in plinth protection. Complete all as specified and directed.

M&L cement concrete (1:2:4) type B-1 using 12.5mm graded agg ) 25mm thick as in sub base/ floor complete all as specified and directed.

M&L for coloured glossy finish Chequered cement concrete tiles 20cm x 20cm x 25mm thick, With white cement & pigment set, jointed and pointed in neat cement slurry and painted in white or coloured cement in floors incl 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position no otherwise specifically provided for as in as in slab supported on walls beams and columns in floors, roof landings, balconies, canopies, deck slabs and in shelves and the like complete all specified and as directed.

M&L for Mild steel bars (TMT bars) 6 to 8mm dia cut to length bent to shape required, including cranking bending and spirally for hooping for columns, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded agg) as in slab supported on walls beams and columns in floors, roof landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

All as per item No. 102 but for Chajjas complete all as specified and as directed.

Form work to soffits of suspended slabs/shelves etc thickness not exc 200 mm in horizontal or sloping complete all as specified and as directed.

Form work to edges of concrete flats horizontal or sloping exc 5 cm but not exceeding 10 cm wide complete all as specified and as directed.

Dismantling of PVC/AC drain pipes for any dia , jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socket, in any length with rubber ring joints, fixed to wall or in floor complete all as specified and as directed.

PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid fixed to wall or in floor complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and as directed.

S&F repairs 75mm bore PVC (SWR) vent cowl, complete all as specified and as directed.

S&F in repair for Cast iron soil, waste and vent pipes100 mm , in any length with or without ears, with cement joints, laid in trenches or in floors

S&F in repair for Cast iron soil, waste and vent pipes 75 mm , in any length with or without ears, with cement joints, fixed to wall.

S&F in repair Cast iron soil, waste Bends 100mm diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F in repair Cast iron soil, waste Bends 75mm diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

M&L preparation of newly wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces and applying one coat of synthetic enamel paint of any description exc 10 cm width or girth, complete all as specified and as directed.

M&L for preparation of old painted steel surfaces over 10 cm width or girth and applying one coats synthetic enamel paint complete all as specified and as directed.

S&F in repair's 18 mm thick celuka PVC ply of grade 1 quality of both side prelam fixed with screws , solvent cement /adhesive to make cupboard shutter side to and bottom ,shelves inside the cabinet and shutters or drawers, complete all as specified and as directed.

S&F in repair's factory made PVC shelf /Partition of required size consisting of pannels of 18mm (+/- 0.7) thick Celuka PVC ply and for supporting the hold of Shelf/Partitions and shall provided 3 edges of 18mm x 18mm as per required length. The front side of the edge visible in the front the shelf /partition to be edge liping by 18 mm wide x 1mm thick PVC sheet of density 600 Kg/ Cum Manufactured by an ISO-9001-2015 certified company ,using solvent cement etc, complete all as specified and as directed.

S&F 75mm size L/Z type steel hinges fixed screws openable cut 110 degree for cabinet shutter complete all as specified and as directed.

S & F in repairs Hasp and staple for 75 mm of aluminium anodized all as specified and as directed.

S&F Extruded brass handles, cast type anodized of size 75mm complete all as specified and as directed.

S&F Magnet catcher for CB shutter complete all as specified and as directed.

S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed.

S&F in repairs sheet glass shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 45cm long, complete all as specified and as directed.

SCH 'A' PART-II

Taking down carefully aluminium point wiring (light, fans, socket etc) complete incl battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc and making good disturbed surface of wall/floor etc complete all as specified and directed.

Taking down old unserviceable DBs of any type and capacity complete all as specified and directed.

M & L for concealed point wiring on wall and surface with necessary fixing arrangements with PVC/FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of paris/ Putty or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:- Note:- Modular Box, Modular Plate, Modular Switches, etc will be measured and paid separately.

(a) One light/bell point controlled by one switch complete all as specified and directed.

(b) One fan point controlled by one switch complete all as specified and directed.

(c) One 5 amps switch socket complete all as specified and directed.

All as per item No. 130 here in before but with 2.5 Sqmm copper wire for power point complete all as specified and directed.

Supply and fix modular switch 1 way, 6 amps, 1 module complete all as specified and directed.

Supply and fix modular switch 1 way, 16 amps, 1 module complete all as specified and directed.

S&F modular socket, 6 Amps, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket, 6/16 Amps, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular fan regulator, 120 watt, 2 module complete all as specified and directed.

S&F modular cover plate with frame, 2 module complete all as specified and directed.

S&F modular cover plate with frame, 4 module complete all as specified and directed.

S&F modular cover plate with frame, 6 module complete all as specified and directed.

S&F modular cover plate with frame, 8 module complete all as specified and directed.

S&F modular metal flush box 2 module complete all as specified and directed.

S&F modular metal flush box 4 module complete all as specified and directed.

S&F modular metal flush box 6 module complete all as specified and directed.

S&F modular metal flush box 8 module complete all as specified and directed.

S&F Modular Bell push 6A 1 module complete all as specified and directed.

S&F buzzer Ding dong, AC 230 volts single pole complete all as specified and directed.

S&F 9 Watt LED T5 batten fitting including provision of PVC insulated sheathed round flexible with multi strand copper conductor of size 1.5 sqmm 3 core 1100 Volts grade complete all as specified and as directed.

Supply and fixing surface and wall mounted LED batten fitting energy efficient, including LED tube with complete fitting of 20 watt, including provision of PVC insulated sheathed round flexible wire with multi strand copper conductor of size 1.5 sqmm 3 core 1100 Volts grade complete all as specified and directed.

Supply and draw sub main wiring with two single core 6 sqmm FR PVC insulated copper cable 1100 volts grade multistranded, unsheathed conductor drawn into FR PVC casing and capping and all necessary fittings including 6 sqmm multi strand FR PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete after taking down the old unserviceable one all as specified and directed.

Supply & Fix SP&N DBs, 8 way single door with 200A rated bus bar, complete all as specified and directed.

Supply and fixing sheet steel, Phosphated, Powder coated single door Vertical TPN DB with provision of MCCB incomer 4 way complete all as specified and directed.

Supply and fix of MCCB, 4 Pole, 63 Amps, with breaking capacity 25KA, Thermal magnetic trip Unit, fixed thermal Fixed magnetic (FTFM), Ics=100% Icu, AC 415 volt, 50 HZ complete all as specified and as directed.

M&L for MCB single pole, 'C' curve, 10 KA, 6 - 32 amps complete all as specified and directed.

M&L for MCB single pole & neutral 'C' curve, 10 KA, 32 amps complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 x60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts nuts, check nut and washers of GI and GI tubing 15 mm bore, light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) typeC 1 pre cast RCC (1:2:4) type B1 cover slab 450 x 450 x 50 mm with one handle for lifting made out of 8 mm dia MS bar, wire mash, 20 mm bore GI tubing(L. G.) for watering ,charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed Electrical plate No. 3 of SSR Part-I complete all as specified and directed.

Supply and fix 30 watt energy savings security light Luminaries with pressure die-cast aluminium housing with heat resistance toughened glass & IP 65/IP66 protection to be provided nearby electric pole, connection with 1.5 sqmm 3 run copper wire after taking down the old Unsv fitting of any type all as specified and directed.

Supply and fix security light bracket bend to 120 degree angle made out of 25 mm bore galvanized iron light grade tubing (approx 1 mtr in length) including necessary tow nos suitable size of clamps with nut, bolts and washers etc and two coats of synthetic enameled paint over coat of red oxide primer complete all as specified and directed.

Supply and laying cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 Core all as specified and as directed.

Excavation in trenches/foundation in soft/loose soil not exc 1.5 metre wide and n 'exc 1.50 m deep for poles, laying of cables, etc and getting out complete all as specified and directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and directed.

Removing excavated material in soft/loose soil n'exc 50 M and depositing where directed at a level n/exc 1.5 M above the starting point, complete all as specified and directed.

S&F in dry coarse sand in cable trenches before and after the cables are laid in sand cushioning to cables complete all as specified and directed.

M&L for well burnt bricks, sub class B type laid in trenches complete all as specified and directed.

M&L for GI tube light grade 25 mm laid in trenches or fixed on wall, floor or on pole with MS flat iron clamp of size 30x3 mm with bolts, nuts and washer of suitable size for cable protection all as specified and as directed.

M&L for cutting/boring of PCC/hard standing at a depth not more than 15 cm deep and 15 cm in breadth for passing earthing conductor and making good the disturbed surfaces with PCC (1:2:4) type B or cement mortar (1:3) complete all as specified and directed.

Schedule of Credit

D N ENTERPRISE

M/s Krishna Construction

M/s PRABIR ENTERPRISE

FREEZCON

M/S D P BERLIA

M/S S. P. ENTERPRISE