PROVIDING NEW GATE GEARING SYSTEM AND REMODELLING OF CANAL REGULATING STRUCTURES AT RD 44382 OF PHILLAUR DISTY

Amount

Dismantling brick work tile, masonry or tile lining in Cement

Dismantling Concrete (Cement concrete plain 1:4:8 or 1:5:10)

Dismantling Concrete Cement concrete plain1:2:4 mix

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Cement concrete 1:3:6 with stone blast mixing by mechanical means using concrete mixer volumetric type CC M10

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level.

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete.

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade

First class flat brick 7.50 cm thick laid in reimbursements in and on cement mortar 1:5 on sides of drains and in other work where required over lime concrete or other foundations. All joints to be left completely filled and struck flush.

Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical and bartering including attached pillasters buttresses etc). Complete in all respect.

Nicking cement concrete surface (over 28 days old) including preparation and laying slurry

Cement pointing 1:2 deep variety

Cement pointing 1:2 flush on flat brick flooring

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete.

Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing and fixing Structural Steel work complete in all respects and to entire satisfaction of Engineer-in-charge.

Providing chequred plate 8mm thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing of hollow bulb seal (Side Seal) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge

Providing and fixing in position of flat/wedge Seal including preparation of surface complete in all respect and to entire satisfications of engineer in charge.

Steel casting as per IS specifications and grade complete in all respect and to entire satisfaction of engineer in-charge.

Providing and Fixing MS Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing High Speed Diesel

Applying priming coat with metal primer on new steel or iron work i/c preperation of surface.

Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete.

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide

Providing and Fixing GI pipe of 1.5" dia complete in all respects and to entire satisfaction of Engineer-in-charge

Providing & Fixing J -anchor dia 16mm complete in all respect and to entire satisfaction of engineer in-charge.

Commissing and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge

CI Housing Cover worm & worm wheel assembly shaft, handle GM Bust with triple start threading inside for sprindle complete including labour charges.

Providing and Fixing MS Spindle of 1 Ton Capacity

Providing and Fixing MS Spindle of 1.5 Ton Capacity

Providing and Fixing MS Spindle of 1.75 Ton Capacity

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification: (b)Sandy material

Any Other Item

THE CHEEMAS SEHKARI KIRAT TE USARI SABHA LIMITED