Construction of line under Deposit Scheme

Amount

Supply of following materials as per RESSPO/PuVVNL norms at the work site.

ST Poles, 11 meter long

PCC Poles, 8.5 meter long

11 KV V-type Steel X-arms

11 KV Pin Insulator with pins

ACSR Weasel Conductor

ACSR Dog Conductor

M.S Channel, 100x50x1300 mm for T-off

Stay Complete

Earthing Complete

11 KV TMPO set

11 KV Fuse set

G.I wire for guarding @ 22 Kg per pole

Gaurding Angle

Disc Insulater with fitting T&C Type

M.S channel, 100x50x2240 mm (Top-channel)

Cross breacing MS Angle

Droper Channel M.S. 100x50x2000 mm

3 x 120mm2 11 KV XLPE cable

I/D & O/D cable jointing kit suitable for 3x120 mm2 XLPE Cable

GI Pipe 6" dia

33 KV Bus Isolator

Structure for above

33 KV Post Insulator set

Structure for above

Transformer bus complete with structure

33 KV lightening arrestor

Structure for above

33/11 KV 5 MVA Transformer

90 lbs rail pieces (44.64 Kg/M)

33 KV Pin Insulator

33 KV Pin with nuts

33 KV VCB with single T/F control pannel and CT 200/100/1 A with structure, 33 KV VCB, Control pannel I/C for 33 KV single T/F, CT 200/100/1-1A, Steel Structure

11 KV VCB I/C, 600/300/5A

11 KV VCB O/G, 200/100/5A

Bus coupler 350 MVA

11 KV XLPE Cable size 300 mm2 (double ckt)

11 KV XLPE Cable size 185 mm2 (double ckt)

I/D & O/D cable jointing kit suitable for 3x185/300 mm2 XLPE Cable

Control Cable size 4x2.5 mm2

Control Cable size 2x2.5 mm2

24 Volt Battery & Battery Charger with cabinet

X-arms holding clamps with bolts & nuts.

M.S clamp for T-off channel with bolts & nuts

Stone pad, 300x300x75 mm

F-bracket with bolts & nuts

Al. binding wire

Danger Board with clamps & bolts

Gaurding Angle Clamps

E-bracket with bolts & nuts

Clamps with nuts & bolts for Top /Dropper Channel

Barbed wire GI

PG clamps

Number Plate

All. Tape

Clamp with bolt & nut

Sundries (LS)

Erection

Erection of single support ST/PCC pole for construction of 11 KV line including digging of pit, fitting of all accessories, back filling of earth & others required work.

Grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Earthing of Poles

Stringing & sagging of 3 phase 11 KV line upto proper sag including laying of ACSR Weasel Conductor, binding with insulators & jumpering.

Erection of Sectional Double Pole Structure of PCC pole including digging of pit, fitting of accessories, back filling of earth, grouting of each pole & stay sets & other required works.

Erection of Sectional Double Pole Structure of ST pole including digging of pit, fitting of accessories, back filling of earth, grouting of each pole & stay sets & other required works.

Drill/cut of stone for erection of Pole/Stay in hilly area

Installation of 11 KV TPMO & fuse set complete work

Gaurding of 11 KV line as per RESSPO norms

Installation of 5 MVA 33/11 KV Power Transformer as per RESSPO norms

Installation of 11 KV Pilfer proof metering cubicle inside meter room, by fixing rag bolts after checking alignment with trench & conneting incomming & outgoing cable in the CT chamber

Installation of 3 ph - 4 W static TVM 11 KV

Installation of 11 KV VCB pannel (O/G), 200/100/5A

Installation of 11 KV VCB pannel (I/C), 600/300/5A

Installation of 33 KV VCB with single T/F control pannel and CT 200/100/1 A with structure of 33 KV VCB, Control pannel I/C for 33 KV single T/F, CT 200/100/1-1A and Steel Structure

Installation of Bus coupler 350 MVA

Installation of 33 KV Bus Isolator

Installation of Structure for above

Installation of 33 KV Post Insulator set

Installation of Structure for above

Installation of 33 KV lightening arrestor

Installation of Structure for above

Installation of Transformer bus complete with structure

Testing & commissioning of 11 KV swichgear

Testing & commissioning of 33 KV VCB with single T/F control pannel and CT 200/100/1 A

Digging of trench size 0.75x0.75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites & top by laying bricks finely cover the same by earth.

Filling of cable box size 3x120 mm2 11 KV indoor & outdoor type

Construction of plinth & foundation of 11 KV VCB as per RESSPO norms

Construction of plinth & foundation of 5 MVA Transformer as per RESSPO norms

Painting of Indoor equipments

Earthing for Outdoor structure such as Bus Isolator, Post Isolator set, Lighting Arrestor, Brecker & CT etc. through boring till the water level with G.I Pipe & G.I strip and connect of all structure as per RESSPO norms

Making of Delta Earthing through boring till the water level with G.I Pipe & G.I strip and connect of 5 MVA Transformer body & neutral as per RESSPO norms

Earthing for Indoor structure including 11 KV VCB pannel etc through boring till the water level with G.I Pipe & G.I strip and connect of all structure as per RESSPO norms

Making of 11 KV cable boxes mounted with swichgear as per RESSPO norms

Saraswati Electricals & Contractors