Precast boundary wall work for the protection of Municipal land plot Gata number 1885 in Jever Road.

Excavation in foundations in ordinary soil (Loam clay or sand) including lift up to 1.5 m and lead up to 30.0 meter and including filling, watering and ramming of excavated earth in to the trenches or into the space between the building and the sides of foundation trenches or in to the plinth and removal and disposal of surplus earth as directed by the Engineer-in charges up to a distance of 30 m from the foundation trenches

Providing and laying cement concrete in 1:6:12 (1 cement: 6 Fine sand: 12 Brick ballast 40 mm gauge)

RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Raft foundation and Footing

RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Raft foundation and Footing

Supply, Fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications including supply of all material, labour, Tools & Plants etc. required for proper completion of work

20 QTL Cum of RCC Raft

20 QTL Cum of RCC Column/Wall

M.S iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work

Apply two coat superior synthetic enamal paint including primer coat on steel surface

2.10 mm high boundary wall 50 mm thick consist of R C C precast conc. post of size 150x150x3000 mm height having two grooves of size 50x30x50 mm so precast conc. Panels of size 1800x300x50mm thick the post is reinforced with TMT bars, panels reinforced with TMT Steel and each manufactured by M30 using 53 grade of conc. With OPC Cement the post may be fixed to the ground by digging a hole of 450x450x600 mm and filled with 1:3:6 conc. After the post has been aligned in the holes (MR)