CONSTRUCTION OF OFFICE ACCOMMODATION FOR AREA ACCOUNTS OFFICE CC LAO A AND LAO B ALLAHABAD

Amount

Sch 'A' Part-I (Buildings & Structures Work) Note : This schedule is pre-priced by MES and the pre-priced rate indicated are under Col. 5.

Total amount of Sch 'A' Part II (Site clearance, excavation and earth work)

Total amount of Sch 'A' Part III (Internal Water Supply )

Total amount of Sch 'A' Part IV (Internal Electrification)

Total amount of Sch 'A' Part V (Sewage Disposal)

Total amount of Sch 'A' Part VI ( Area Drainage)

Total amount of Sch 'A' Part VII (Compound Wall/Security Wall/Retaining Wall, Fencing and Gate)

Total amount of Sch 'A' Part VIII (Road/Path/Culvert)

Total amount of Sch 'A' Part IX (External Water Supply )

Total amount of Sch 'A' Part X (External Electrification )

Total amount of Sch 'A' Part XI (Lighting Protection)

Total amount of Sch 'A' Part XII (Condute for Lan )

Total amount of Sch 'A' Part XIII (Demoliton of building)

Sch 'A' Part - XIV (Miscellaneous Items for B&R AND E&M) Note - This Schedule is not pre-priced by MES and the pre - priced rate indicated as "Rs 0.00 under col.5 siginifies this fact only.

INTERNAL WATER SUPPLY S&F Angle valve, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipe 15 mm bore complete all as per specified & directed..

S&F health faucent (1.50 metre tube) with hook (hand spray ) with CP body, complete all as specified & directed.

INTERNAL ELECTRIFICATION M&L for point wiring complete for One light/Fan/Exhaust fan/Bell point controlled by one switch with PVC insulated and unsheathed ,FRLSH cable 1.5 sqmm (nominal area), ISI marked,multi stranded copper conductor cable including ISI marked not less than 20 mm dia medium grade PVC conduit concealed in wall , roof/floors, factory made pressed steel concealed terminal boxes not less than 1.6mm thick of reqd size including 1.5 Sqmm PVC ,FRLSH cable insulated unsheathed multi stranded copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories complete all as specified & directed.

All as per item no 17 of above but for One 5 pin 5 Amp switch socket out let point on an independent board complete all as specified & directed.

All as per item no 17 of above but for one 5 pin 5 Amp switch socket out let point on same board complete all as specified & directed.

All as per item no 17 of above but for controlled by two 2-way switches complete all as specified & directed.

M&L for point wiring complete with PVC insulated and unsheathed,FRLSH cable 2.5 sqmm (nominal area) ,ISI marked,stranded copper conductor single core including ISI marked not less than 20mm dia medium grade PVC conduit concealed in wall and MS conduit in roof/floorslab,pressed GI concealed termined boxes not less than 1.6mm thick of reqd size including 2.5 Sqmm,FRLS cable PVC insulated unsheathed multi strandered copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories complete all as per specified & directed.

Supply and fixing Tele phone socket ,Modular, ISI marked all as specifed and directed.

S&F LED Building security light fitting with aluminum pressure die cast housing, high purity PC Fresnel diffuser with silicon gasket for IP-65 protection, power consumption <20 W (14W) & luminaire lumen >2500 lm and system efficiency > 120 lm/W, in built electronic driver prewired upto terminal block with driver efficiency >85% power factor >0.95 as light source with toughened glass including two core flexible copper wire of 1.5 sq mm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 in length and made out of GI tubing 35/40 mm dia /suitable dia light grade bend to shape security light fitting with necessary MS clamp 25 mm wide and 6 mm in thickness in suitable length not more than 30 CM and max length of pipe 1.5 Mtr long with one code of anti corrosive primer and two coats aluminum paint including nuts, bolts and washers complete all as specified and directed.

S&F Mirror light Decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate body with Minimum 8 Watt & Maximum 11 Watt LED warm white in colour with a luminous efficacy of 120 lum/watt(min) with PF not less than 0.9 with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification.complete all as specified and directed.

S&F circular slim surface LED downlighter of 8 Watts with housing made up of die cast aluminum for better thermal management, high transmitivity non yellowing PMMA diffuser for better light output and uniform light distribution without glare, power consumption <10W, luminaire lumen>1000lm, driver and accessories to be prewired, CRI>70, LED efficiency > 120 lm/W photo biological safety report as per IEC624718 & electrical insulation class I, LED life with L70 criteries -37000 hrs colour temp >6000K, Ingress protection IP-20, ambient temperature 0 to 450C, driver efficiency >85%, THD<10% as per IEC 61000-3-2, power factor >0.95, surge protection 2.5 KV, two stages isolatated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM79 & LM80 certification complete all as specified & directed.

S&F circular slim surface LED Decorative Wall mounting of 10Watts with LED Bulb 10 watts complete Polycarbonate housing, globe type Glass protection with high transmitivity non yellowing PMMA diffuser for better light output and uniform light distribution without glare, power consumption <10W, luminaire lumen>1000lm, driver and accessories to be prewired, CRI>70, LED efficiency > 120 lm/W photo biological safety report as per IEC624718 & electrical insulation class I, LED life with L70 criteries -37000 hrs colour temp >6000K, Ingress protection IP-20, ambient temperature 0 to 450C, driver efficiency >85%, THD<10% as per IEC 61000-3-2, power factor >0.95, surge protection 2.5 KV, two stages isolatated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM79 & LM80 certification complete all as per specified & directed.

S&F MCCB 4 pole ,415 V ,AC fixed type 100 amps with breaking capacity 10 KA complete all as per specified & directed.

S&F MCB TP 63 Amps 'B" series,,10 KA 240 Volts ,AC complete all as per specified & directed.

S&F MCB SPN 40 Amps 'B" series,,10 KA 240 Volts ,AC complete all as per specified & directed.

S&F MCB SPN 16 Amps 'B" series,,10 KA 240 Volts ,AC complete all as per specified & directed.

S&F MCB single pole 6- 32 Amp rating 'B' Series,10 KA 240 Volts,AC 50 Hz ,ISI marked complete all as per specified & directed.

Submain wiring with two single core 2.5 sqmm copper conductor FRLSH, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including 2.5 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specifie. Note:- Two single core 2.5 sqmm copper conductor, one run PVC conduit and one run of 2.5 sqmm earth wire shall be considered & measured as one unit.

Submain wiring with two single core 4 sqmm copper conductor FRLSH, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including 4 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to cdommon earth and connection to earth dolly complete all as specified.(For connection to flood light) Note:- Two single core 4 sqmm copper conductor, one run PVC conduit and one run of 4 sqmm earth wire shall be considered & measured as one unit.

Submain wiring with two single core 6 sqmm copper conductor FRLSH, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including 6 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to cdommon earth and connection to earth dolly complete all as specified (Note:- Two single core 6 sqmm copper conductor, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit.

M & L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground.(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr. below ground level connecting to galvanised earth lead wire 4.0 mm dia as earth lead upto 7.5 meters long connected by means of bolts, check nuts and washers of GI and earth wire protected by provision of GI pipe medium grade, 15 mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 40 x 40 x 3mm fixing with 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, with fixing arrangement, funnel, wire mesh and earth work in hard / dense soil, returning filling in and removal of surplus soil to a distance not exeeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection all as specified and testing on completion. Note: The cost of excavation and earth work, PCC pit and pit covers, funnel and watering pipe, wire mesh, charcoal dust and common salt,20/ 40mm dia, medium grade, GI pipe as protection to GI wire 4.0 mm as main earthing lead from earth electrode to main TPN MCCBs DB/MCB DB/ test point length not less than 7.5mtrs) shall be deemed included in the unit rate for earthing and testing complete. All as specified and dircted .

SEWAGE DISPOSAL M & L for Spetic tank exc in ordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers Covers including RCC precast Manhole cover having 6 mm plate embedded all around /fiber reinforced cover with angel iron frame vent shaft and suldge chambers etc complete for 100 users(with uper flow filter) complete all as specied and shown on drawing No. TD/750 Sheet 1/2 & 2/2

M & L for Sokage well exc in ordinary soils , foundation in PCC 1:3:6 wells of Honey combed and solid in M -25 Concrete including intercepting chamber ,screen chamber Brick in CM ,RCC cover slab in M-25 /RR masory filling with brick bats ,complete of size 1.8 M ×4.5 deep complete all as specied and shown on drawing No.TD/ 576 Sheet 1/2 & 2/2

COMPOUND WALL/ SECURITY WALL/RETAINING WALL, FENCING AND GATE Construction of 5.0 metre wide steel gate with brick pillar including excavation in soft/loose soil PCC 1:2:4 type B2 in foundation ,brick work in cement mortar 1:4 as in pillers, RCC 1:2:4, reinforcement, copping, plastering, RFR, removal of soil, steel frame work & painting etc complete all as specied and shown on drawing No. TD/579 Sheet 1/2 & 2/2

Provn of steel wicket gate 1.5 metre wide with brick massonary pillars and with MS work locking arrangement, pintel hinges & excavation, two coat of synthetic enamel paint over primer , plastering & white washing/ colour washing etc complete all as specied and shown on drawing No. TD/579 Sheet 1/2 & 2/2

ROAD PATH CULVERT M&L for hume pipe culvert of 6.00 metre long and 600 mm bore class NP2 pipes and on required minimum depth & including excavation , parapet & two coats of colour wash over a coat of white wash complete all as specied and shown on drawings No- TD/575 sheet No 1/2& 2/2 dated16.09.1989.

M&L for cleaning the road surface for marking lines ,deshes ,arrows on road with retroeflective colour paint as approved using'Hot Thermoplastic paint material ' 2.50 mm thick layer including glass beds laid by semi automatic themoplastic paint applictor machine fitted with profiles shoe glass beds dispenser ,tank & profile shoe heater driven by cosist homogenously composed of pigment ,resines & glass beds in requred propotion as per MORTH Specifiction and conforming to revelent IS complete all as per specified & directed.

EXTERNAL WATER SUPPLY M&L for construction of bricks masonary valve pit chamber of size 950 mm x 950 mm x 950 mm (internal dimensions) including necessary excavation and earth work and MS sheet cover 3mm thick and angle iron 50 mm x 50 mm x 6 mm frame including locking arrangements with lock and key of 50 mm lock duly painting of steel surface in two coat of synthetic enamal paint over one coat of red oxide primer complete all as specified and directed.

M&L for construction of bricks masonary valve pit chamber of size 450 mm x 450 mm x 450 mm (internal dimensions) including necessary excavation and earth work and MS sheet cover 3mm thick and angle iron 50 mm x 50 mm x 6 mm frame including locking arrangements with lock and key of 50 mm lock duly painting of steel surface in two coat of synthetic enamal paint over one coat of red oxide primer complete all as specified and directed.

Supply and laying pipe ductile Iron, S/S including specials, Class K-7, 100 mm dia complete all as specified and directed.

REFRIGERATION & AIRCONDITIONING Supply and install on wall split AC units 1.5 TR indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity as shown complete all as specified and directed.

Supply and install on wall split AC units 2 TR indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2.of capacity as shown complete all as specified and directed.

Supply and install Voltage stabiliser for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy ± 2.5% and of capacity 5.0 KVA (for ACs) complete all as specified and directed.

LIFT Supply and fix lift electrically operated micro processor controlled compelte with power driven automatic stainless steel sliding doors and having stainless steel car enclosure, suitable for carry 8 passengers (544 Kgs)at a speed of 1 m/s to serve upto 4 floors (Lower ground+ground+2 upper floors) including automatic rescue device and having following specification :- complete all as specified and directed. Basic elevator data Elevator type : Passenger lift for minimum 8 passengers Load and capacity : Minimum 544 kgs or 8 minimum persons Speed : 1 M/S Machine type & location : Gearless machine in machine room located directly above lift wellStops and openings : 4 stops and 4 openings, single entrance door Travel height : 10.2 mtrs Elevator grouping : Simplex full collective control Drive : ACVVVF Available well dimension : 2400 mm width and 2510 mm depth (approx) Available floor height : 2800 mm for lower ground floor (approx) and 3200 mm for other floors (approx) Available pit height : 1800 mm (approx) Map floor position : Ex machine floorDoor type : 2 panel automatic centre opening door in SS silver sky finish with ACVF drive Note : (i) Manufactures's design/specification, dimension of car enclousure will be submitted by contractor to GE and get it approved before placing the order.(ii) Any minor change in dimension as per OEM recommendation shall be got approved by GE.

Contd item No 48.00 Finishes Car design : SS Silver sky finish Car panel finish : SS silver sky finish Handrail : Round bend handrail silver brushed stainless steel at rear wall Ceiling and lighting Intrgrated roof LS4 brushed stainless steel SUS 304 square spot light LED Flooring : 20 mm Granite duly polished Car skirting material : Stainless steel hairline Floor number Floor mark Interfloor Distance Landing door material 1-4 B, G, 1, 2 2800 mm for basement SS silver sky finish and 3200 for other floors Car operating panel : 1 full height SS face plate silver brushed segmented LCD display square surface mounted buttons. Landing signal : SS 7 segment display flush mounted silver brushed square surface mounted Features Car Emergency Light Firemen control and emergency return Curtain of light 169 beams Accurate relevelling, automatic, closed doors Blower fan for ventilation with automatic operation Provision of additional cores in travelling cable for CCTV camera signals/music sytem wiring Automatic rescue device with audio announcer in case of power failure incl battery backup Three way intercom Nudging service Attendant service Door open and door close buttons in car operating panel Lift announcer PFC - Potential free contacts Access control provision Braille on push buttons Motor overheat protection Overload function with audio-visual indication in car operating panel Phase failure and phase reversal protection

Contd item No 48.00 Nudging service Attendant service Door open and door close buttons in car operating panel Lift announcer PFC - Potential free contacts Access control provision Braille on push buttons Motor overheat protection Overload function with audio-visual indication in car operating panel Phase failure and phase reversal protection

WATER COOLER & DESERT COOLER supply and installation of Water Cooler of capacity 80 litre storage and nominal cooling capacity 40 litre per hour, connecting to GI tubing by means of and incuding PVC pipe connection with brass coupling, nuts at both ends and PVC pipe flexible of suitable size for waste water an dother necessary fittings including necessary electric connection with and including plug top 15 Amps from voltage stablizer to water cooler complete all as specified and directed. Notes:- (i) GI pipe line will be measured and paid separately

Supply and installation of Dessert cooler electric fan driven (Single phase) having normal air flow capacity of 5000 Cum/ hour complete with exhaust fan motor 450 mm sweep RPM and submerisble water lifting pump of capcity 2.80 m head 230 Volt AC including locally fabricated cabinet with three side panels front top and tank including vertical mention made out of 22 SWG PGI sheet of size not more than 121.1 x 76.5 x 55.5 cm with front side chequerd mesh including horizontal and vertical manually operated air diverted fins , including 4 way PVC distributer, PVC pipe 3 to 4 mtr for spray water, wood wool pads, plastic electrical box having two Nos 5 amps piano switch and indicator including suitable size stand for outdoor mounting of dessert cooler complete with electric wiring for fan & pumps controlled separately complete all as per specified & directed.

Voltage stabiliser for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output viltage stabilized at 230 Volt with accuracy ± 2.5% and of capacity 3.0 KVA complete all as specified and directed.

DGSET Silent/containerzed diesel engine driven generating set complete to give an output of 160 KVA AC 415 Volts, 50 Cycles per second, 3 phase 4 wire supply with power factor 0.8, 1500 RPM diesel engine and alternator mounted on common base plate, anti vibration rubber mounting pad (AVM Pads "B" series) complete in all respect with and including accessories and components as specified below including sound proof integral accoustic enclosure for 500 KVA Gen Sets ECO friendly and as per Ministry of Environment, forests notifaction 17 May 2002 complete including, emergency stop button, illumination inside canopy, Temperature sensor for high temp safety, exhaust fan etc complete as per IS 4722, AMF type with relay panel for automatic starting on mains failure complete all as specified and directed. (a) Diesel Driven Engine (Prime mover):- Multi cylinder, vertical/horizontal, 4 stroke cycle, suitable for 160 KVA alternator, water cooled conforming to BSS- 649 rated for continuous running diesel engine suitable to FF matching BHP at 1500 RPM as per latest ISS/BSS, capable of taking 10% over load for any one hour in any 12 hour running, complete with and including following accessories:-

Contd item No 52.00 i) Fuel filter ii) Governor ( Electronic) iii) Complete battery set with lead & lugs as recommended by manufacturer. iv) Lubricant oil cooler v) Lubricant oil pump. vi) Lubricant oil filter vii)Digital oil pressure gauge viii) Any other parts as prescribed by manufacturer for its good functional performance. ix) Battery charging alternator suitable for charging Batteries. x) Dry type air filter

Contd item No 52.00 xi) MS channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternator and anti vibration pads. xii) Coupling guard. xiii) Exhaust pipe fully extended to exhaust gases outside the acoustic enclosure including silencer and necessary insulation lagging all as per manufacturer's recommendations. xiv) Fuel tank of sheet steel and of capacity for 12 hours running on full load with inlet and outlet connection, filling cap, drain valve, air vent with caliberated scale on outer surface, floor mounted with suitable angle iron supports. xv) Digital type RPM meter with hour meter. xvi)Self starter of suitable size xvii) Turbo charger

Contd item No 52.00 xviii) In line mono block xix)Fuel pump xx)Digital type Coolant temp gauge. xxi)Self starter with auto electric start accessories xxii) Engine safety low lubricant oil pressure and high coolant temperature. xxii) Test certificate

Contd item No 52.00 (b) Alternator:- 160 KVA at 0.8 PF self excited self regulated with fast response thyristor type, 3 phase 50 Hz 415 Volts, 1500 RPM 4 wire alternator, screen protected drip proof free from commutation problem, continuous rating confirming to BS-649 complete with automatic voltage regulator output voltage regulated between + 1% of set volts from no load to full load. (c) Manufacturer maintenance & operation manual of Gen Set - 02 Set. (d) AMF Panel :- AMF control panel 24 volt DC system complete with internal wiring and levelling floor type totally enclosed made of steel metal suitable for the above Generator Set incorporating the following:-

Contd item No 52.00 xi) Auto change over complete with suitable size power contactor of size upto 400 Amps with tripping relay complete. xii) Engine starting relay. xiii) Frequency stabilizer auto mechanism to maintain the supply. xiv) Battery charger suitable to charge the battery of 12 V/24 Volt DC with buck/ boost system - 01 No (e) Supply & install of Acoustic Enclosure suitable for 160 KVA DG set as under i) Fabricated out of CRCA sheet of suitable thickness as per manufacture design. Polyster based powder coated internaly and externaly with lockable type door handle. All nuts and handles shall be zinc coated. ii)The doors are gasketed with EPDM gaskets.

Contd item No 52.00 (e) Supply & install of Acoustic Enclosure suitable for 160 KVA DG set as under i) Fabricated out of CRCA sheet of suitable thickness as per manufacture design. Polyster based powder coated internaly and externaly with lockable type door handle. All nuts and handles shall be zinc coated. ii)The doors are gasketed with EPDM gaskets.

Contd item No 52.00 iii) Sound proofing with high quality rock wool/ mineral wool confirming to IS 8183 of 50mm thickness and density at 96 Kg/M3 covered with fiber glass cloth and perforated powder coated sheet specialy designed allenuators (Sound controller) at air entry and exit of the container noice level shall be not exceed 75 Db at 1 meter distance as per CPCB/Government of India Norms. iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower. v) Emergency stop push button outside the container. vi) Provn of light inside the canopy i.e. providing LED light fitting 1 x20 Watt with wiring and control switch.

Contd item No 52.00 (f) MOUNTING ARRANGEMENT- Prime mover and alternator shall be mounted on skid mounting type base frame fabricated from ISMC channel or in sheet metal providing common bed for engine and alternator directly coupled together the base frame has provision for grouting on foundation bolt as well as fixing on vibration mounts provision is made in base frame for tilting arrangement of DG set as recommended by manufacturer. The base frame shall have provision of lifting hook for convenient lifting of complete set ie along the canopy engine and alternator.

M&L for Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried ndirectly in ground ( earth pit not less than 2.25 m deep below GL) with top edge of the plate not lesss than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm thick by means of bolts, nuts, check nutsa and excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4), atype B! using (20 mm graded stone aggregate ), mild steel frame made out ange iron of size 40 mm x 40 mm x 3 mm thick duly painted with two coats of synthetioc enamal paint with two coats of synthetic enamal paints over one coat of red oxide zinc chrome primer hinged with and including 6mm thicks CI cover with handle, watering arrengement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering, 40 mm dia light grade GI pipe for lead protection in and including alternate layer of charcoal dust and comman salt complete all as shown in electrical plat no. 3 connected to earthing test point all as specified and indicated including testing on completion as directed .Note:- If the desired earth resistance is not found , eathing shall be re-done by the contractor at no extra cost to the department.

Supply and fix garden/landscape light LED type 10 watt 230 volts AC outdoor type with decorative light complete with decorative post top 1 metre long with terminal for cable in and out function 4 Pole, 360 degree indirect light IP 65 protection with impact and corrosion resistant complete including necessary earth work with driver and lamp complete all specified and directed.

M & L for DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 3.5/4 core, one no of 6 amp MCB SP and fixed to the Steel Poles by means of suitable size of clamps with nut and bolt complete all as specified and directed.

M & L for transformer platform with standard specification alongwith chain link fencing and gate including necessary excavation and earth work ,PCC 1:5:10 type E2 using 40 mm grade crused stone aggregate ,brick work 1:6 ,rendering 15 mm in cement mortar 1:6 on fair faces of brick work surfaces ,crused stone hardcore of gauge n exc 63 mm ,PCC type B-2 ,1:2:4 100 mm thick, PCC type B-0 ,1:2:4 , 40 mm thick finished even and smooth with using extra cement complete all as specified ,shown on drawing No CELZ TD-699 and directed.

M & L for Preparation of new surface of electric pole 9/11 metres including painting two coats of aluminium paint over one coat of red oxide primer including 3 nos band straps with colour (250 mm wide each) synthetic enamel paint at a distance 250 mm from plinth block , marking pole nos with black synthetic enamal paint complete all specified and directed.

SEAHAWK ENTERPRISES PVT LTD

S. K. CONSTRUCTION