SPECIAL REPAIRS TO BLDG NO P-07 (COOK HOUSE) AT PFFR KHETOLAI UNDER STN HQ POKARAN MIL STN UNDER AGE (I) POKARAN

Amount

Demolition of PCC in Ground Floor and paving n exc 15 cm (below or above ground level) complete all as specified and directed by Engr-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed by Engr-in-Charge.

M&L for PCC type D2 1:4:8 using 40mm graded stone aggregate, 75 mm thick as in sub base for floors, complete all as specified and directed by Engr-in-Charge.

M&L for coloured Glazed ceramic tiles in vertical surfaces 450 x300x7 mm thick on vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm backing coat in CM1:4 including complete all as specified and directed by Engr-in-Charge.

M&L Coloured joint free Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including screed bed 15 mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge.

All as per item No.05 here in before, but on vertical surface over a backing coat of 10 mm thick plaster in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.and black complete all as specified and directed by Engr-in-Charge.

M&L for Hand Cut Kota stone flooring 20-25mm thick incl for cuttting and polishing by machine over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including provision of 20 mm thick screed bedding in CM (1:6) complete all as specified and directed by Engr-in-Charge.

Machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting,dado,and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including provision of 10 mm thick backing coat of CM (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete complete all as specified and as directed by the Engineer-in-Charge

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed by Engr-in-Charge.

Drilling holes for bolts, pipes, etc. n. exc 25mm dia in granite or trape stone for gas connection pipe complete all as specified and directed by Engr-in-Charge.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F PVC waste pipe 50 mm dia for sink complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregates) as in plinth protection finished even and smooth complete all as specified and directed by Engr-in-Charge.

Complete removal of existing water proofing treatment incl bedding if any n exc. 50mm thick etc. on any type of roof, cleaning with wire brushers etc. and removal of debris out side MD land complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 25 to 55 mm as per the requirements complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPC (WPC will be measured and paid separately as supply only) complete all as specified and directed by Engr-in-Charge.

Supply only integral Waterproofing compound complete all as specified and directed by Engr-in-Charge.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forced and sealing all the over laps of 75 mm in length side and 100 mm on the width side of membrane complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on walls and roof ceilings etc., including racking out joints, hacking for key, scrubbing down with water etc. to receive new plaster complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L preparation of new wall surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer,including 3mm thick wall care putty on wall complete all as specified and directed by Engr-in-Charge.

M&L preparation of old surface and applying three coat of white wash on ceiling complete all as specified & directed by Engineer-in-charge.

Finishing wall with Acrylic emulsion smooth exterior paint of reqd shade, (two or more coat) applied @ 1.67 Ltr/10 Sqm over and incl priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete all as specified and directed by Engr-in-Charge.

M&L for preparing old painted surfaces and applying a one coat of oil bond distemper on surfaces of walls complete all as specified & directed by Engineer-in-charge.

Taking down door shutter area exc 1 sqm but n exc 2 sqm each and removing to store complete all as specified and directed by Engr-in-Charge.

Taking down Chowkat or frames with shutters (with out taking off shutters from the frames) area n exc. 1.50 Sqm each and removing to store complete all as specified and directed by Engr-in-Charge.

Taking down Chowkat or frames with shutters (with out taking off shutters from the frames) area exc 1.50 sqm and n exc 4.00 sqm complete all as specified and directed by Engr-in-Charge.

Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410-W (Gde E-250) quality 'A', complete all as specified and directed by Engr-in-Charge.

Second class HW rail and style plain frame factory made moulded panelled shutter 35 mm thick (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veeneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

M&L for II nd class hard wood Glazed and skeleton shutters, 30 mm thick , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.

Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqn in each pane complete all as specified and directed by Engr-in-Charge.

S&F 4 mm thick figured glass, pin headed type and glazing with oil putty in square n exc 0.50 sqn in each pane complete all as specified and directed by Engr-in-Charge.

S&F mild steel butt hinges minimum weight 100mm size. Mild steel cold rolled as specified & directed by Engineer-in-charge.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy , anodised sliding door bolt 300 mm long with hasp, staple ( Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

Preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

Preparation of new Steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks and removing to store capacity of tank exc 500 and n exc 1000 ltr) complete all as specified and directed by Engr-in-Charge.

Supply and fix rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,1000 ltr capacity complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15 mm bore to walls, ceiling etc. complete all as specified and directed by Engr-in-Charge.

--Ditto-- all as per item No. 47, here-in- before, but 20mm dia pipe

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge.

S&F Medium grade GI tubing 15 mm bore with all fittings , to walls, ceiling or laid in floors etc. complete all as specified and directed by Engr-in-Charge.

Ditto all as per item No- 50 here in before but in 20mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 20 mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs for stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore in repairs complete all as specified and directed by Engr-in-Charge.

S&F in repairs bib taps cast cipper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed by Engr-in-Charge.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let complete all as specified and directed by Engr-in-Charge.

PVC (SWR) multi floor trap with grating including jointing with solvent cement 100 mm dia out let complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes of 75 mm dia, single socket fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends with access door of 110 mm dia, any radius complete all as specified and directed by Engr-in-Charge.

S&F PVC(SWR) bends with access door of 75 mm dia, any radius complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends of 75mm dia, any radius complete all as specified and directed by Engr-in-Charge.

Demolition of stone/ boulder masonry and built in cement mortar complete all as specified and directed by Engr-in-Charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified and directed by Engr-in-Charge.

Taking down carefully existing point wiring of any description light, fan,sockets,bells etc) complete including fittings such as terminal boxes, switches, sockets, ceiling rose, lamp holders, brackets sketch fittings, pendants, fan regulartors and making good the disturbed surfaces, walls, floors etc. complete all as specified and directed by Engineer-in-Charge.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and directed by Engineer-in-Charge.

M&L point wiring complete with 1.5 Sqmm single core PVC insulated cable 1100 Volts grade multistranded copper conductor drawn through in PVC Casing and Capping on surface stone/brick, masonry walls, roofs floors etc including MS terminal boxes fabricaterd out of 1.12mm thick MS sheet sunk type / surface type and laminated top sheet of 2mm thick for housing switches sockets, regulators etc including provn of 1.5 sqmm dia copper conductor for earth wire connected to common dolly complete all as specified and directed by Engineer-in-Charge. (a) One light point / Fan point / Exhuast Fan point controlled by one 5 Amps One way switch complete all as specified and directed by Engineer-in-Charge.

All as per Item No. 69 above, but for one 3 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed by Engineer-in-Charge.

All as per Item No.69 above, but for one 3 pin 5/6 Amps switch socket outlet on independent board complete all as specified and directed by Engineer-in-Charge.

All as per item No.69 above, but wiring with 4.0 Sq mm and 2.5 sqmm for earth continuity for 3 pin 15/16 Amps switch socket combination complete all as specified and directed by Engineer-in-Charge.

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed by Engineer-in-Charge.

M&L switch piano flush type single pole one way 15 Amps complete all as specified and directed by Engineer-in-Charge.

M&L Switch Socket Combination outlet, multipurpose, 2 pin 5 amps/3 pin 5 amps controled by one switch 5 amps, flush type complete all as specified and directed by Engineer-in-Charge.

M&L Universal socket outlet with shutter, 5/15 amps controlled by one switch 15 amps, flush type complete all as specified and directed by Engineer-in-Charge.

S&F Ceiling fan regulator Stepped type, 120 W-2 module AC 240 V complete all as specified and directed by Engineer-in-Charge.

M&L lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed by Engineer-in-Charge.

supply and fix LED Lamp Retro fit type 9 watts 230 V and complete all as specified and directed by Engineer-in-Charge.

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminais complete all as specified and directed by Engineer-in-Charge.

S&F Sheet Modular metal enclosure DB TPN 415 Volts 4 Way double door type with 200 Amps busbar for fixing of MCBs complete all as specified and directed by Engineer-in-Charge.

S&F Sheet Modular metal enclosure DB SPN 240 Volts 8 Way double door type with 200 Amps busbar for fixing of MCBs complete all as specified and directed by Engineer-in-Charge.

S&F MCB Triple pole and neutral, 63A, 415 Volts AC complete all as specified and directed by Engineer-in-Charge.

S&F MCB Single pole and neutral, 40A, 415 Volts AC complete all as specified and directed by Engineer-in-Charge.

S&F MCB Single pole, 5-32A, 415 Volts AC complete all as specified and directed by Engineer-in-Charge.

Supply and drawn sub main wiring with two runs of 4 Sq mm single core PVC insulated unsheathed cable upto and including 1100 volts grade with multistranded copper conductor drawn through in PVC Casing and Capping on surface walls, floors etc including one run of 2.5 Sqmm PVC insulated copper conductor for earth continuity wire all as specified (Note : Two runs of copper conductor and one run of 2.5 Sqmm copper earth wire will be measured and paid as one unit only)

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.5 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and directed by Engineer-in-Charge.

S&F new generation energy saving and environmental friendly long life varsatile pressure die cast aluminium IP66 road way light fitting with high power LED as light source of capacity 20 watts with suitable drivers etc fixing to wall/poll with and including bracket made out of GI pipe of suitable dia light grade not less than 1.5 mtr long, bent to shape, fixed to Pole/Wall in any position with flat iron clamps of size 30 x 4mm including taking down old unserviceable street light fitting of any type and capacity complete all as specified and directed. Make : Havells cat No : VILUMINASL20WLED757SASYBOPC or techno commercial equivalent model in Philips /Bajaj /Luker /Wipro.

Supply and lay in trenches/fixed to walls/poles etc and commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with aluminium conductor of 3.5 Core 25 Sqmm incl taking out of existing cablecomplete all as specified and directed by Engineer-in-Charge. Note :- Earth work excavation, sand cushioning and brick protection shall be measured and paid separately.

Excavation in trenches not exc 1.5 mtr wide and n.exc 1.5 mtr in deep and getting out in Hard/Dense soil laying of cables etc. complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading, leveling watering and well ramming in layers n.exc 25cm thick using excavated soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above from the starting point complete all as specified and directed by Engineer-in-Charge.

Supplying and laying reinforced precast concrete cable cover class LV , Type 1 flat with size 250mm x150 mm x 40mm complete all as specified and directed by Engineer-in-Charge.

Supply and spread approved Tibba sand for foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as directed by Engineer-in-Charge Note:- Punned thickness will be measured for payment purpose complete all as specified and directed by Engineer-in-Charge.

Supply and lay GI tubing of size 40 mm bore light grade for cable protection at road crossing / on poles and tubing sealed at both ends after laying the cables complete all as specified and directed by Engineer-in-Charge. Make :- ISI

Supply and laying steel water tubing medium grade, galvanised with all fitting, laid in trenches and testing for leakages incl taking down old unserviceable one complete all as specified and directed for the following sizes:- (i) 25mm dia Notes :- (a) Excavation and Earth work shall be measured and paid separately.

Supply and laying steel water tubing medium grade, galvanised with all fitting, fixed to wall and ceilings or laid in floor and testing for leakages complete all as specified and directed for the 20mm dia

Supply and fix in replacement of unserviceable Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed for the following sizes :- (a) 20mm dia bore (Make : Zoloto)

---ditto--- as per item No.99 above, but 25mm dia bore (Make : Zoloto)

Supply and fix in replacement of unserviceable ball brass valves, high pressure with polythene float and fly nut alongwith socket/reducer of suitable size, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed for the 20mm dia

Cutting the existing road straight by manual, depth and width not less than 30 cm for pipes up to 100 mm dia and 60 cm for pipes from 150 mm to 150 mm dia and 75 cm for pipes above 250 mm dia and filling back with excavated soil up to 75 % road portion and 25 % shall be made with cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate complete all as specified and directed.

Cutting existing CI pipe line for insertion of new tees, collars for branch connections complete all as specified and directed for the size upto 80mm dia

M/s Shri Inder Construction Company

Rakesh Choudhary Contractor