01/RS4/NPS/25-26 (SL NO - 04)

Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1 for Rural Roads of MORD. (Borrow pit /pre work post work measurement) ph-239,it-3.14

Construction of Sub Base using Local Materials: Construction of Sub Base using Local Materials, spreading in uniform layers with Motor grader on prepared surface, including screening the metal as ......e wide on each side to protect the edges complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) For Construction of Sub Base by compacting 1st class brick aggregates (40 down) and sand (in proportion of 60:40). pg-247,it-4-.09

supplying & laying polythene sheet (150gm/sqm) over damp proof course or below flooring or roof terracing or in foundattion or in foundation trenchse ,pg-47,item no-3

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with cement content as per IRC: 15-2011, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batch mix plant as per approved e, sealant primer, joint..... polysulphide sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing and clause 602 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).3. The characteristic flexural strength of concrete shall not be less than 4.5 MPa. pg-264item-6.02 a

Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. (ii) 125mm diameter PG-334,IT-18.18

Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles(ii) 125mm diameter PG-334,IT-18.17

Drum Sheet Walling 1.40m (av.) high on Sal-bullah / Eucalyptus bullah piling 10 cm dia. and 3.25m long driven 1.75m (av.) below G.L. and 75cm centre to centre including fitting fixing 3 nos. of half bullah pieces (from 10 cm dia) and drum(empty bitumen) sheet (approved condition) of height 1.5m , cutting and straightening drum sheet (each joint must have lap length of min.50mm) including cost of necessary nails, bolts, nuts etc. and providing 2 to 3m long half bullah ties of 10cm dia. @ 2.25 m centre to centre fixed with 10 cm dia. bullah posts driven 1.5m below G.L. including cost of all materials and one coat of coal tarring to all bullah etc. complete as per direction.(i) Using Eucalyptus bullah PG-338,IT-18.39

supply of silver sand at site pg-224,it-4

Supplying empty Cement bags in good condition pg-336,it-18.28

filling empty Cement bags with dry earth or sand, stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete but excluding cost of sand and gunny bags. Pg-336,it-18.29

SOP_RURAL ROADS _SSM_FINAL_ANNEXURE(specfctn of project information sign board) providing and erecting direction & place identification retro reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3 fixed over al sheeting... it-8.06 pg-279

add GST 18%

add labour cess 1%