ELECTRIC WORK

Amount

fctusl Iyku 24&25 ¼ikVZ&2½ ;kstuk ds vUrxZr fo|qr forj.k [k.M&’k’Ve] cqyUn”kgj ds dk;Z{ks= esa 33@11 dsoh fo|qr midsUnz VkaM+k ds vUrxZr midsUnz dk lqn<hdj.k ,oa izksVsD”ku lacaf/kr dk;Z] 11 dsoh ykbZu fuekZ.k ,oa ckbZQjds”ku dk;Z rFkk 11 dsoh ykbZuksa ds lqn`<hdj.k dk dk;ZA

Carriage of fallowings from ESC. BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, rcquricd for proper completion of work, distance about to 60 Kms.

STP Pole 13/11 mtr Long.

PCC Pole 8.5 mtr Long.

Carriage of All line Material from store center BSR to at site ACSR Weasel/ Rabbit conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator, 11KV O/G BCV, 3x120/3x185/3x300 Sq. mm 11 KV XLPE Cable etc.

Erection of PCC 8.5 MTR Single pole support including complete IT fittings with channelas per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of PCC 8.5 MTR Double pole/Scation Pole support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of 13 MTR Single STP pole support including complete IT fittings with channelas per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of 11 MTR STP Double pole/Scation Pole support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Single support PCC/STP Pole shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Double pole PCC/STP Pole support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Fixing & Installation Of 11 KV O/D VCB As Per Respo Norms

Cutting /drilling /fabrication of channel and angleWelding of MS Angle iron for making guarding angle size 65x65x6/50x50x6 mm including the work of fixing the bracket on PCC/ST pole for construction of the line.

fixing of 11 Kv Stay rod with Stay wire As Per RESPO Norms

Grouting of 11 Kv Stay rods As Per RESPO Norms

Laying, sagging. Stringing and binding and jumpering of ACSR Weisal , rabbit, dog newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

ACSR Rabbit Conductor

ACSR weisal conductor

3x300 Sq. mm 11 KV XLPE Cable Laying in Previous Trunch

3x185 Sq. mm 11 KV XLPE Cable Laying With Trunch, Sand & Bricks

Over Head Laying 11 KV XLPE Cable 3x120 Sq. mm

Making of Barer Size I/D and O/D 11 KV Cable Jointing Kit

Fixing of Droper Channel/Top Chennal/T-off chennel

Fixing of Bracing Angle

Fixing of 11 Kv Pin Insilator

Fixing of 11 Kv Disc Insilator

Fixing of 11 Kv Cross Arm

Fixing of earthing rod.

The folloing material is required to be Providing & Fixing by contractor.

Holding clamp. With Nut & Bolts

11 KV F-Clamp

GI Pipe 6"Dia

MS nut & Bolt off size.

M/S SHRI KRISHNA CONTRACTORAS (BID ID -4742775)

C B S ENTERPRISES (BID ID -4742921)

NIKITA ENTERPRISES (BID ID -4742701)