SPECIAL REPAIR TO BLDG NO T 412 AND T 413 OF JCOS SINGLE ACCN AT 3 EME CENTRE 29 SRW AT BAIRAGARH UNDER GE BHOPAL

Amount

Note : Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below:-

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL/ AS PER LIST OF MAKE AS APPROVED BY GE]

S&F Pre-painted galvalume aluminum zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL/ AS PER LIST OF MAKE AS APPROVED BY GE]

Dismantling of wall and celing hard boards/AC sheets and plywood in any thickness & any position including cover fillets complete all as specified and directed

M&L for galvanised cold rolled steel section framework of size 600 x 600mm grid size using 24x38x0.50 (composite thickness) tee (bottom pre coated) & 24x24x0.50mm (composite thickness) wall angle including suspenders as per manufacturer’s instructions complete all as specified and directed. [Make: GABSON(Gabsec) or equivalent as per list of make as approved by GE]

S&F asbestos free calcium silicate board of size 600x600x6mm, fixed to steel frame work in ceiling with & including applying two coats of oil bound distemper complete all as specified & directed. NOTE:- Cost of making frame work for light fittings, etc is deemed to be included in the quoted unit rate

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed

M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed.

Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick(below or above GL) incl tiling complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C2, using 40 mm graded stone aggregate in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation , filling, sub base and mass concrete complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-1 (20 mm graded aggregate) as in floor to receive floor finishes, complete all as specified.

Taking down chowkhats or frame with shutters exc 1.5 Sqm but not exc. 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frame with shutters n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges/box type hinges with steel handle, and steel peg stay, complete including lugs with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges/box type hinges with steel handle, and steel peg stay, complete including lugs without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F Mild steel conforming to Fe-290 Gde E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each pane complete all as specified and directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed and with stainless steel wire staples fixed complete all as specified.

M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F 150 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed

S&F 100 mm mild steel butt hinges, medium weight cold rolled complete all as specified & directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 35mm thick second class hard wood glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a) complete all as specified and directed.

M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cm 1:6 all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hackng for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces fair and even (without using extra cement) complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on brick/concrete surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of exterior water base emulsion paint on walls over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment of any layers and including filling of cracks, holes by suitable material like cement based putty, and applying two coats of exterior water base emulsion paint over a coat of primer on walls complete all as specified and directed. MAKE : ASIAN (ULTIMA) or equivalent in BURGER/ SHALIMAR/ as per list of make as approved by GE.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper on walls complete all as specified and directed.

M&L for applying one coat of white wall care putty 3 mm thick on walls complete all as specifed and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.

S&F Steel work in tubular/structural trusses, purlins, rafter etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed.

Dismantling unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

M&L for preparing new or untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of zinc primer complete all as specified and directed

S&F drepary rod decorative type min 25mm dia, curtain rod chromium plated with side fixing brackets, rings & including decorative knobs complete all as specified and directed.

M&L for Hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy /reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. [MAKE:- MEHTAB / NAVYA TILES / SAP PAVERS/ SAGAR TILES/ Make as per list of make is approved by GE]

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for concealed point wiring for light point with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade,ISI marked controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories(PVC Casing and caping to be done wherever wiring to be run on ceilings and concrete surfaces including one run of 1.5 sqmm FRLS muti stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly, including sunk sheet steel terminal box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ prssed steel terminal box to be conclead in wall, duly painted with two coates of anti corrosive black bituminous paint over a coat of red oxide primer in and out sides and two coated of aluminium paint on internal surface , including laminated hylum sheet cover, ISI marked of Make" Hylem" for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed. Note : Wiring to be done as per arroved colour code in IE rule. Rate includes chase cutting for concealed wiring

All as per item No. 51.00 here-in-before but for one fan Point/bell point controlled by one way switches, with cables 1.5 sqmm complete all as specified and directed.

All as per item No. 51.00 here-in-before, but for exhaust fan point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm. complete all as specified and directed.

All as per item No. 51.00 here-in-before but for 3 pin socket outlet, 5 Amp on the same board with other switches, complete all as specified and directed.

All as per item No. 51.00 here-in-before, but for 3 pin 5 amp socket outlet on independent board with other switch complete all as specified and directed.

All as per item No. 51.00 here-in-before but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on independent board and provision of 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. .

All as per item No.51.00 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. .

S & F single pole and neutral enclosure with two pin and earth, plug and socket , suitable for single phase 240 V,complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking cap 10 KA, including industial plug top, complete all as specified and as directed. Make : Legrand cat part No. 607841 or equivelent in Schinder/ L&T/ make as per list of make as approved by GE..

M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 6 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

Taking down u/s light fitting any type and S&F LED 20 W/21Watt tube light fitting (T8 type) , including LED retrofit tube 20/21 W one side connection type, 240 v, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative patti suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make :-Havells ENDURALINEARNEOBS20WLED840SPCWH or equivivalant in Bajaj/Philips/Cromption/ make as per list of make as approved by GE.

Taking down existing u/s fitting and S&F LED 9/10Watt tube light fitting, surface mounting fitting for mirror light with slik and light weight batton, 240 Volt, with PF >0.95, efficacy >95 , colour temp 6500K complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make :- Havells cat Part No LUMILINEBS9WLED865SPCWH or equivalent in Philips/ Crompton/Bajaj/ make as per list of make as approved by GE.

S&F Polycarbonate switch piano, flush button, single pole, one way 5 Amp , 240 volts ISI marked, Make Anchor/ Havells/Cona/ Leader (white colur)/ make as per list of make as approved by GE.

Supply and fixing, Polycarbonate ceiling rose, surface type, 3 terminal, 240 , ISI marked, Make Anchor/Havells/ Cona/ Leader (white colur)/ make as per list of make as approved by GE.

Supply and fixing Polycarbonate socket outlet 2-in-1, 5 pin 6 Amps, 240 volts, flush type Make Anchor/Havells/ Cona/ Leader (white colur)/ make as per list of make as approved by GE.

S&F with socket outlet flush type multipurpose 2 in 1, 3 pin 6 and 16 Amp, 230 volts complete as directed.

S&F Polycarbonate switch piano flush button single pole one way 15 Amp 240 volt ISI marked, Make Anchor/Havells/ Cona/ Leader (white colur)/ make as per list of make as approved by GE.

S&F, stepped type electronic fan regulator, Delux model, 100 watt, 230V, flush type. Make Anchor/ Havells/Cona/ Leader (white colur)/ make as per list of make as approved by GE.

S&F Lamp holder, insulated body with back plate suitable for batten/angular fittings fixed complete.Make Anchor/Havells/ Cona/ Leader (white colur) with LED lamp of 9 watt (of make : Philips/Bajaj/CG)/ make as per list of make as approved by GE.

S&F Buzzer, Ding Dong AC. 230 volts, single pole. complete all as specified and directed

S&F Polycarbonate bell push flush type, SP, 5 amp, 240V, complete all as specified and directed

Taking down main switches/MCB DBs of any capacity/type including MCBs.

S&F sheet metal enclosure for VTPN DB 415 Volts, 4 way, double door (Vertical type double door, and suitable for MCB as incomer and MCB SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 complete all as specified and directed by Engr-in-charge. : Make- Legrand/ Seimens/ Schinder/ make as per list of make as approved by GE..

Supply and fixing, flush to wall, double door MCB DB, SPN 12 way, 240 volts grade, with 200 amps rated bus bar IP 43 ,RAL 9003 powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed by EIC : Make- Legrand/ L&T/C&S/ make as per list of make as approved by GE.

S & F MCB RCBO 40 amps 30 mA double pole , C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge. Make- Legrand/ L&T/C&S/ make as per list of make as approved by GE.

S&F MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge. Make- Legrand/ L&T/C&S/ make as per list of make as approved by GE.

S & F MCB TPN 63 amps 10 KA , C-series including connection with suitable size with copper lugs complete all as specified and directed by Engr-In-Charge. Make- Legrand/ L&T/C&S/ make as per list of make as approved by GE.

Taking down unseviceable ceiling fans and S&F Ceiling fan of AC single phase 230/240 V of size 1200 mm sweep and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed Make:Crompton/Bajaj/Havells/ make as per list of make as approved by GE. Note : Old ceiling fans to be deposited in AGE E/M Yard.

Taking down old unserviceable sub main wiring of any size and any discription all as directed by Engr-In-Charge.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR-2009 Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by 15mm dia light grade GI pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. NOTE :- (i) The concrete pit shall be PCC (1:3:6) type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) The unit rate includes the cost of GI pipe medium grade for protection of earth wire and 4mm dia earh lead wire upto 7.5 M. (iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S&F energy saving and environment friendly LED Security light fitting of 25watt with high power LED's with lens and IP66 protection and luminaire housing is of pressure die-cast alluminium alloy for heat sink for better heat transmission with polycarbonate cover and fixing on bracket of suitable size and making electrical connection from light fitting to source with PVC insulated, sheathed alumium conductor cable of 1.5 Sqmm x 2 core complete with all as specified and directed by EIC. Make- Havells Cat No . ENDURAPEARLSL25WLED757SASYTOPC .or equivalent in Philips/Wipro/ make as per list of make as approved by GE.

S&F exhaust fan 300 mm sweep compete with louvers including all civil work like cutting and making circular opening in existing wall of kitchen etc ,including including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make:CG/Bajaj/Orient/ make as per list of make as approved by GE.

S&F in Replacement/Provision of Gysers BEE star rated and supply, fixing, commecting with cold and hot water pipe lines and testing of storage water heater, 240V, SP, 25 Ltr capacity including PVC hot and cold water pipe connections Make:- Bajaj/ Havells/ CG/ make as per list of make as approved by GE

Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in any type of soil for laying cables, erection of poles complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed

Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 4 x 16 sqmm, laid in trenches/floor or fixed on wall/pole complete all as specified. Make of cable : Havells / Polycab/ KEI/ Ravin cables/ make as per list of make as approved by GE

Taking out existing u/s pipe and S&F GI Tubes, 'light grade' galvanised of 50 mm bore, with all fitting and laid in floors, under road, pavement or hard standing, along pole steel tubing for protection of UG cable complete all as specified and directed.

M&L for Boring of holes under road, pavement, hard standing by trenchless manual auguring including reinforced concrete pipe class NP 3 of bore 80 mm complete all as specified and directed.

Deduct schedule of credit (calculation will be done off line) Rs. 45688.00

M/s AKG Engineers & Contractors

M/s VIKAS TRADERS

M/S MEWALAL UPADHYAY

AJIT ENTERPRISES

PADAMSHRI CONSTRUCTION CO

NIHAL ENTERPRISES

Samaksh Enterprises

M/S Shanti Traders

ROYAL CONSTRUCTION

RAJPATI CONSTRUCTION