DOOR TO DOOR MAINTENANCE FOR ADDRESSAL SYSTEM OF ARMAN AND REPAIRS TO JOINERY PLUMBING KITCHEN INTERNAL WIRING CLEARING OF BLOCKAGES IN THE MD ACCN BLDGS OF FMME TOC POC ASSAY LINE MEANEE LINE OFFICERS MESS HRDC 32 KEY PERS QTRS UNDER AOR AGE B R ME

Amount

B/R WORKS

Taking down chowkat (without taking of shutter from the frame) area not exc. 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM (1:3) all as specified and as directed.

All as per Sl Item No. 1.001 above but area exc. 1.50 sqm and not exc. 4.00 sqm each.

Taking down shutters of any description area exc. 1 sqm but not exc. 2 sqm each all as specified and as directed.

Taking down shutters of any description area exc. 1 sqm but not exc. 2 sqm and re-fixing in same opening after easing complete all as specified and as directed.

Box type Steel windows/ventilators double side shutters (windows side hung type, ventilators top hung type) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, shutters box type made out of CRC Sheet of 40x20x1.0mm, windows & ventilator shutters shall be of glass and gauge type, fixed with box type hinges, aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, telescopic stays, etc complete all as specified including 12mm square guard bars/grill welded with steel frame (100c/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bard/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements. (ii) 4 mm thick sheet glass and wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose . (iv) All Windows/Vent design as per CECZ TD drg No 539.

Stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.40mm and fixed with tinned tack or stainless wire staple all as specified and as directed.

4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 sqm in each pane all as directed.

Preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel over a coat of red oxide primer, complete all as specified and directed.

Anodised aluminum powder coated (of any shade/colour as approved by GE ) ventilators of size 600 x 900 mm with adjustable 4mm thick figured glass louvers, fixed in qtr portion, without sash bars, aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm including complete etc all as specified and directed.

Anodised aluminum powder coated three track sliding aluminum window including frame and shutters consisitng of 2 x glazed shutters (thickness of glass not less than 5mm) and 1x gauged shutter (stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm), aluminum sections weighing n.less than 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as peg stays, self closing clips, handles etc all as specified and as directed.

Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and directed.

Factory made flush door shutters 35mm thick,as per IS:2202 (Part-I 1999) solid core construction, with decorative face veneers on both sides including providing teak wood lipping/frame as per drawing and painted to match the door, fixed to chowkhats all as speified and directed.

Second class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed

Preparation of new or previously untreated wooden surfaces of any description not other wise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed. NOTE :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) wuth 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing with wood free EPS complete all as specified and as directed.

Mild steel butt hinges, medium weight, cold rolled, 100mm long and fixed to door frame and shutters duly welded/screwed complete all as specified and as directed.

Stainless steel butt hinges, medium weight, cold rolled, 100mm long and fixed to door frame and shutters duly welded/screwed complete all as specified and as directed.

Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed.

Aluminium anodised tower bolt 150 mm long of extruded section etc complete all as specified and as directed.

Aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed.

150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed.

150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floors etc., complete all as specified and as directed.

Stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.40mm and fixed with tinned tack or stainless steel wire staple all as specified and as directed.

18mm thick PVC sheet one side prelaminated of approved texture ("Celuca Ply of Rajshree make or equivalent as approved by GE) as in Kitchen cabinet (with shelves and partitions) including necessary fittings and fixtures all as per manufacturer's instructions fixed in repairs complete all as specified and directed.

Stainless steel kitchen basket in various type of baskets susch as plaint basket height 4", Thali basket 8" height, Cup saucer basket 4" heigt, and perforated cutlury basket 4" height all as specified and directed.

Stainless steel channel for basket sizes 600mm long and 46mm wide all as specified and directed (Make : Hettich/Godrej)

Stainless steel handles for basket of size 6" all as specified and as directed.

Stainless steel auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment + 2.50mm & depth adjustment 4mm complete all as specified. Make : Godrej / Hettich.

18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination and other side balancing white lamination including 6mm thick teak wood lipping fixed in repairs complete all as specified and directed. .

Second class hard wood plain fillets, square, rectangular or triangular in section area not exc. 3 sq.cm, clean sawn, secured with nails or brads, fixed to cupboard shutters all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the the premises complete all as specified and as directed.

Demolition of cement concrete and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

Demolition of brick work or stone / PCC /boulder masonry built in cement mortar or lime mortar including all quions, arches, pillars but excluding ashlar facing, dressed stone work of any description all as specified and directed.

Brick work with sub class 'B' bricks built in CM(1:6), straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and as directed.

Brick work (except bricks)with sub class 'B' bricks built in CM(1:6), straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints, hacking for key and disposing of debris to a distance exc 1 Km out side MD land complete all as specified and directed.

15mm thick rendering on brick or concrete surface in cement mortar (1:6) and finishing the surface with even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick in CM(1:4) mixed with water proofing compound as per manufacturers instructions finishing the surfaces even and smooth without using extra cement including necessary scaffolding complete all as specified and directed. NOTE:- WPC will be measured and paid separately under relevant items.

Supply only integral liquid water proofing compound all as specified and as directed.

Rendering 5 mm thick on ceiling /RCC surfaces in cement mortar (1:3), finishing the plastered surfaces even and smooth without using extra cement all as specified and as directed.

Preparation of newly plastered surfaces and applying two coat of oil bound distemper emulsion over a coat of alkali resistent primer over a coat of wall putty complete all as specified and directed.

Preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and as directed.

Preparing newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in floors 25mm thick, as in sub base to floor complete all as specified and as directed.

Non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Glazed coloured ceramic tiles as in vertical surfaces 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including backing coat 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Vitrified light coloured ceramic tiles 8 to 10mm thick (square/rectangular) polished, area of each tile not exc. 0.36sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) for layaing floor finishes complete all as specified and as directed.

Vitrified ceramic light coloured tiles 8-10mm thick (square/rectangular) polished, area of each tiles not exc 0.36sqm as in vertical surfaces such as skirting / dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including backing coat 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Pre polished Machine cut Granite stone slab 18-20mm thick with edge rounded one side laid over 15mm thick cement mortar (1:4) screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Providing and laying water proofing treatment to sunken portion of WCs, bathroom and kitchen etc by applying cement slurry mixed with two component elastomeric acrylic based polymer modified cementitious composite compound coating of make as approved in TI 5/2003 including demolition and removal of existing treatment of any type with the following procedure in sequence all as specified and as directed:- (i) Demolition of existing treatment of any type including cleaning and removal of debris from site. (ii) First layer of cement slurry @ 0.488 kg/sqm of cement mixed with acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm, the layer will be allowed to air cure for 4 hours. (iii) Second layer of cement slurry @ 0.242 kg/sqm of cement mixed with with acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm, the layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iv) 20mm thick screed in cement mortar (1:3) mixed with including supply of liquid water proofing compound as per manufacturers instructions. Contd.. 1.052

Contd.. from 1.051 (v) Ponding the treated portion atleast 48 hours, if any leakage / seepage observed the entire procedures will be repeated without any extra cost. (vi) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (vii) Sunken portion shall be filled with lean cement concrete(1:5:10), type E-2 using 40mm graded stone aggregate. NOTE :- (i) The sunken slab sloped towards outer face to drain the water in to GI spout pipe. (ii) Coving shall be provided at the junction of slab with the wall. (iii) Nahni trap shall be 10mm below finished floor level and drain pipe dia is larger than the nahni trap size. (iv) The outer end of the spout should be chamfered.

Demolition of existing roof treatment of any type including cement plaster 10 mm thick and PCC 25mm thick and providing screed bed/rendering 10mm thick in CM (1:4) mixed with and including supply of approved water proofing compound as per manufacturers instructions over and including 25mm thick (average) PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) by removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and providing 50mm x 50mm coving at the corners with PMC mortar as above, and applying APP modified water prrofing membrane as per IS 1654-2017/IS 16352-2017 mineral finish, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed.

Dismantling water tanks of any type and removing to store, capacity exc. 250 litres and not exc. 500 litres all as directed.

Dismantling water tanks of any type and removing to store, capacity exc. 500 litres and not exc. 1000 litres all as directed.

Rotational moulded polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 500 ltrs complete all as specified and as directed.

All as per Sl Item No 1.056 above but except tanks. NOTE:- Serviceable tanks as obtained from Sl Item No. 1.054 above shall be reused.

Rotational moulded polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 1000 ltrs complete all as specified and as directed.

All as per Sl Item No 1.058 above but except tanks. NOTE:- Serviceable tanks as obtained from Sl Item No. 1.055 above shall be reused.

20mm dia Ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed inrepairs (min weight 20mm-210 gms) all as specified and as directed.

Gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed

Gun metal gate or globe valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed

Easing and adjusting aluminium door / window including refixing beading after replacement of defective portions such as door closer, aluminium handles, hinges, locks, new rubber gasket, aluminium beading, preleminated prarticle board, sheet glass etc complete all as pecified and as directed. NOTE:- Door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board and sheet glass shall be measured and paid sepetately under respective items of BOQ.

Easing of door shutters for easy closing / opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter and drawers including fixing of screws adjusting handles, knobs and tightening piano hinges including miscelleneous small adjustments complete all as specified and directed.

Taking down shutters of any description area exc. 1 sqm but not exc. 2 sqm and re-fixing in same opening complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description area exc. 1 sqm but n.exc. 2 sqm each complete all as specified and as directed.

Aluminium sheet of 0.56 mm thick fixed to bottom rail in ‘U’ shape upto lock rail on inner side and upto top edge of bottom rail on external side of door shutter fixed in repairs with screws / nails complete all as specified and directed.

Aluminium anodised barrel towel bolts of extruded section of length 150 mm fixed in repairs all as specified and as directed.

Aluminium anodised barrel towel bolts of extruded section of length 200 mm fixed in repairs all as specified and as directed.

Aluminium anodised barrel towel bolts of extruded section of length 100 mm fixed in repairs all as specified and as directed.

300mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed in repairs complete all as specified and as directed.

100 mm long aluminium extruded handle, fabricated type, anodised etc fixed in repairs complete all as specified and as directed.

150 mm long aluminium extruded handle, fabricated type, anodised etc fixed in repairs complete all as specified and as directed.

Butt hinges medium weight cold rolled mild steel of size of hinges 100mm, fixed in repairs complete all as specified and as directed.

Hasp and staple, safety type of size 100 mm of aluminium anodized all as specified and as directed.

Mortice lock with four lever brass body 100mm size suitable for 25 to 60mm thick doors including screwing and fixed in repairs all as specified and as directed.

40 mm dia cup board knobs fixed with nut, screw and washer of brass,polished complete fixed in repairs all as specified and as directed.

150 mm long floor door stopper of aluminium alloy powder coated, with hard drawn steel spring all as specified and as directed.

Door closer, hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body) fixed in repairs complete all as specified and as directed.

Mild steel 300mm long ordinary rat tail rod pattern springs, including roller and roller plate complete fixed in repairs complete all as specified and as directed.

125mm size rim latch with two lever of mild steel body,stove enamelled finish, lever handle and fixed to steel windows(left&right) fixed in repairs complete all as specified and as directed.

Mild steel casement stays, size 300mm, with hinged joint and two plates, with studs complete fixed in repairs as specified and as directed.

Curtain rod mild steel, chromium plated 20mm dia with fixing brackets fixed in repairs as specified and as directed.

Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed in repairs as specified and as directed.

4 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 sqm in each pane including hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.

3mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc. 0.5 sqm in each pane including hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts fixed in repairs all as specified and as directed.

Stainless steel decorative curtain rod of 25 mm bore with wood finishes (weight not less 400 gms per running meter) incl fancy finial caps etc complete fixed in repairs all as specified and as directed.

Desinger brackets for curtain rod of dia 25 mm dia made out of SS flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long including wooden base ccomplete fixed in repairs all as specified and as directed.

Petty repairs to leaking water in bib taps, pillar taps, stop cock , angle valve, PVC connection waste pipes, float valves, concealed stop cock. GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed

Petty repairs to high/low level flushing cistern by adjusting the float valve, leakage of PVC connection, PVC/GI bend replacing of rubber washer, check nuts,plugs etc for any type of flushing cistern complete all as specified and directed.

Disconnecting to existing PVC water tanks, setting aside (for lowering down if required) for repairs, hoisting if required reconnecting and refixing in position capacity upto 1000 ltr including cleaning of overhead tank and removing the sludge, washing down with detergent powder & writing the date of cleaning with paint complete all as specified and as directed.

Kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laborotry with plugs, washers and wastes including bedding in mortar on to dwarf wall or including fixing cantilever brackets and connecting union pipes overall size 915x460mm bowl size 410x330x160mm complete fixed in repairs all as specified and as directed.

Kitchen sink made of stainless steel 1mm thick kitchen with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets or fixing in granite slab and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete fixed in repairs all as specified and as directed.

Stainless steel plate rack of 0.63mm thick sheet, size 800mm x 600mm complete fixed in repairs all as specified and as directed.

Vitreous china wash basin white flat back of size 550 x 400mm excluding chain, plug and porcelain stopper but including CI brackets,. waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red leead cement and other end fixed, PVC waste pipe 75 cm long complete fixed in repairs all as specified and directed.

Vitreous china wash down water closet pan (pedestal pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete of cera model cat pt no. 2008 fixed in repairs complete all as specified and directed.

Vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor, fixed in repairs complete all as specified and as directed.

Vitreous china urinals, bowl type (back or corner wall type), complete fixed in repairs including providing and fixing plugs,bedding the urinal against wall in cement mortar(1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; supply and fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe all as specified and as directed.

PVC valveless, syphonic action type, flushing cistern, duo flush cistern 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, fixed in repairs complete all as specified and directed. (Cat No-502 of Prayag or equivalent in any approved make as in PS)

Taking up or down 15 mm existing steel tubing and connections all as specified and as directed.

Taking up or down 20 mm existing steel tubing and connections all as specified and as directed.

Taking up or down 25 mm existing steel tubing and connections all as specified and as directed.

20 mm outer dia CPVC pipes SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials complete all as specified.

25 mm outer dia CPVC pipes SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials complete all as specified.

20mm dia GI tubing medium grade and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

25mm dia GI tubing medium grade and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

Brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe all asper Prayag Cat No-7875 URBONA series or techno commercially equivalent make as specified in PS fixed in repairs complete all as specified and directed.

Brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe all as per Prayag Cat No-PIS-75H of Neptune series or techno commercially equivalent make as specified in PS fixed in repairs complete all as specified and as directed.

15 mm dia single lever basin mixture tall height with outo pop up waste system all asper Cat No PIS-7852 URBONA series of Prayag or equivalent make as specified in PS fixed in repairs all as specified and as directed.

15 mm dia pillar taps swan neck type, chromium plated cast copper alloy fancy type all asper Cat No PIS-14H Neptune series of Prayag or equivalent make as specified in PS fixed in repairs complete all as specified and as directed.

Brass chromium plated overhead shower rose 100 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as per Cat No BS-67 Marcus series of Prayag or equivalent make as specified in PS complete fixed in repairs all as specified and as directed.

15mm dia angle cock, chromium plated cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions all as per Cat No PIS-7810 URBONA series of Prayag or equivalent make as specified in PS complete fixed in repairs all as specified and as directed.

15mm dia angle cock chromium plated cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc., all as per Cat No PIS-10H Neptune series of Prayag or equivalent make as specified in PS complete fixed in repairs all as specified and as directed.

Bib Cock 2 way double handle with chromium plated flange all as per Cat No-7812 URBONA series of Prayag or equivalent make as specified in PS fixed in repairs all as specified and as directed.

Bib Cock 2 way double handle with chromium plated flange all as per Cat No-PIS-12H Neptune series of Prayag or equivalent make as specified in PS fixed in repairs complete all as specified and as directed.

Brass chromium plated long body bib tap 15mm dia with chromium plated flange all as per Cat No-7808 URBONA series of Prayag or equivalent make as specified in PS fixed in repairs all as specified and as directed.

Brass chromium plated long body bib tap 15mm dia with chromium plated flange all as per Cat No-PIS-08H Neptune series of Prayag or equivalent make as specified in PS fixed in repairs all as specified and as directed.

Brass chromium plated bib tap, sink cock regular spout (W/M) with flange 15mm dia all as per Cat No-7816 URBONA series of Prayag or equivalent make as specified in CA fixed in repairs all as specified and as directed.

Brass chromium plated bib tap 15mm dia with chromium plated flange all as per Cat No-PIS-06H Neptune series of Prayag or equivalent make as specified in CA fixed in repairs all as specified and as directed.

Health faucet, brass body, chromium plated with 1mtr SS braided tube & wall hook all as per Cat No-BEA-41/BEA-85 of Prayag or equivalent make as specified in CA complete all as specified and as directed.

Towel rail stainless steel glossy finish all as per Cat No-BA10S of prayag or equivalent make as specified in CA complete fixed in repairs all as specified and as directed.

Towel rack brass body, glossy finish all as per Cat No BA-03 of Prayag or equivalent make as specified in CA complete fixed in repairs all as specified and directed.

Towel ring brass boduy, glossy finish all as per Cat No BA-02 of Prayag or equivalent make as specified in CA complete fixed in repairs all as specified and directed.

Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivlaent makes fixed to wall as per manufacturers instructions complete fixed in repairs all as specified and directed.

PVC mirror cabinet of size 400x500 mm all as per Cat No 554 of Prayag or equivalent make specified in CA complete all as specified and as directed.

PVC wall mounted shelf 500mm, unbreakable, square shaped, all as per Cat No BEA-47A of Prayag or equivalent make as specified in CA fixed in repairs complete all as specified and as directed.

PVC wall mounted coner shelf, unbreakable, 3 Pcs set i.e 8"-1 No, 10"-1 No & 12"-1 No, all as per Cat No BEA-44A of Prayag or equivalent make as specified in CA fixed in repairs complete all as specified and as directed.

Peg set of six all as per Cat No BEA 30 of Prayag or equivalent makes specified in CA fixed to walls all as per manufacturers instructions complete all as psecified and as directed.

Toilet paper holder all as per Cat No BA-88 of Prayag or equivalent make of CA fixed to walls as per manufacturers instructions complete all as specified and as directed.

PVC connection 15 mm size with PTMT nuts of length 450 mm, fixed in repairs all as specified and as directed.

32 mm dia waste fittings,brass,chromium plated for sinks,basins,etc with long screwed shanks and flynuts,flange end fixed in repairs complete all as specified and as directed

75 mm dia waste fittings, brass, chromium plated for sinks etc with long screwed shanks and flynuts, flange end fixed in repairs complete all as specified and as directed.

PVC corrugated waste pipe 32mm dia, 800mm long fixed in repairs complete all as specified and as directed.

75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement. complete all as specified and as directed.

Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

15mm dia Bib tap PTMT fancy type any colour screwed, for iron pipe and fixed in repairs all as specified and as directed.

15mm dia pillar taps, PTMT fancy type of any colour, screwed, for iron pipe and fixed in repairs all as specified and as directed.

15mm dia stop cock / angle cock PTMT fancy type of any colour screwed for iron pipe fixed in repairs all as specified and as directed.

PTMT body health faucet with 1.50 mtr long braided rubber hose pipe and wall hook, fixed in repairs all as per Cat No. 188 of Prayag or techno commerical equivalent models in Essco / Parryware / Hindware complete all as specified and as directed.

25 mm dia ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe fixed in repairs complete all as specified and as directed.

PVC sintex tank cover suitable for circular tanks of 500/1000 ltrs capacity including hinges and locking arrangements fixed in repairs complete all as specfied and as directed.

Plastic water closet seat cover for pedestal pan closed pattern with flat bottom, and cover and mild steel chromimium plated or aluminised hinging device fixed in repairs complete all as specified and as directed.

PVC urinal waste pipe 32mm dia 800mm long, complete fixed in repairs all as specified and as directed.

Removal of sludge from manholes of any size and depth and burrying the sludge in pits with suitable depth & filled by earth and removal of surplus soil including dewatering of water complete all as directed to a place as earmarked by state auth out side the defence land . Note - Dewatering of water or mud will not be paid ,only sludge to be paid

Clearing and removal of blockage, of any type in WC, bathroom, kitchen including floor/nahani traps, soil waste / vent pipes gully trap upto 1st manhole, in any situation by way of cleaning / desludging and removing foreign materials to a place as earmarked by state auth out side the defence land to the entire satisfaction of Engineer-in-charge.

NOTE:- (a) Contractor shall detail his supervisor to office of AGE B/R(MEG) daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area divided in two parts i.e. Md accn & OTM accn under this contract. (b) Contractor shall provide service providers (sweepers) separately for both the Complaint cell (FMME & Meanee Line) as per the complaints list given alongwith all requisite tools, equipments, including safely measures for attending complaint and ensure completion report by 5.00 PM same day. (c) Complaint/blockage cleared in one building in a day may be for WC, bath, kitchen, floor/nahani traps etc shall be treated as one complaint. (d) Please note that all the complaints relating to internal sewage (WC/bath/kitchen etc) shall be attended within same day (within 12 hour). (e) In case any complaint pertaining to inside the building (WC/bath/kitchen) is not attended by 12.00 hours. A penalty @ Rs. 100 per complaint shall affected from contractor payments.

75 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.

110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.

75mm bore PVC (SWR) bends any radius, type 'B' with access door complete all as specified and as directed.

110mm bore PVC (SWR) bends any radius, type 'B' with access door complete all as specified and as directed.

75 mm bore PVC (SWR) junction single (single T), type 'B' equal or unequal complete all as specified and as directed.

110mm bore PVC (SWR) junction single (single T), type 'B' equal or unequal complete all as specified and as directed.

110mm bore PVC (SWR) junction single (single Y), type 'B' equal or unequal complete all as specified and as directed.

75 mm bore PVC (SWR) junction single (single Y), type 'B' equal or unequal complete all as specified and as directed.

PVC (SWR) branch piece, type 'B' double (double Y) equal or unequal 110mm dia, type 'B' with access door fixed in repairs complete all as specified and as directed.

PVC (SWR) branch piece, type 'B' double (double Y) equal or unequal 75mm dia, type 'B' with access door fixed in repairs complete all as specified and as directed.

PVC (SWR) vent cowl of bore 75 mm dia, including taking down old PVC vent cowl all as specified and as directed.

PVC (SWR) vent cowl of bore 110 mm dia, including taking down old PVC vent cowl all as specified and as directed.

E/M WORKS

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan,call bell socket or power circuits) including fittings such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., complete and making good the disturbed surface of walls, ceiling etc., including painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Point wiring complete concealed with 1.5 sq.mm single core PVC insulated unsheathed 1100 volts grade multi stranded with FRLS copper conductor cable conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked including accessories concealed in walls including MS terminal boxes fabricated with 1.6 mm thick MS sheet, concealed on walls with laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 1.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for one light point controlled by one switch.

All as per Sl Item No. 2.002 here in before but for one fan point controlled by one switch/regulator.

All as per Sl Item No. 2.002 here in before but for one light point controlled by 2 way switch.

All as per Sl Item No. 2.002 here in before but for one 3 pin socket out let 5 Amps on independent board.

All as per Sl Item No. 2.002 here in before but for one bell/buzzer point controlled by bell push.

All as per Sl Item No. 2.002 here in before but for one 3 pin socket out let 5 Amps on same board.

Point wiring complete concealed for modular type switch & sockets with 1.5 sq.mm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor cable conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories concelaed type wiring includign GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for one light point controlled by one switch.

All as per Sl Item No. 2.008 here in before but for one fan point controlled by one switch/regulator

All as per Sl Item No. 2.008 here in before but for one light point controlled by 2 way switch.

All as per Sl Item No. 2.008 here in before but for one 3 pin socket out let 5 Amps on independent board.

All as per Sl Item No. 2.008 here in before but for one bell/buzzer point controlled by bell push.

All as per Sl Item No. 2.008 here in before but for one 3 pin socket out let 5 A on same board.

Point wiring complete surface type with 1.5 sq.mm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor cable conforming to IS 694 drawn through and including PVC Casing & Caping ISI marked with accessories surface type wiring including 1.6 mm thick MS sunken boxes concealed on walls including laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed one light point controlled by one switch.

All as per Sl Item No. 2.014 here in before but for one fan point controlled by one switch/regulator.

All as per Sl Item No. 2.014 here in before but for one light point controlled by 2 way switch.

All as per Sl Item No. 2.014 here in before but for one 3 pin socket out let 5 Amps on independent board.

All as per Sl Item No. 2.014 here in before but for one bell/buzzer point controlled by bell push.

All as per Sl Item No. 2.014 here in before but for one 3 pin socket out let 5 A on same board.

Point wiring concealed complete with 2.5 sq.mm single core PVC insulated unsheathed 1100 volts grade multi stranded FRLS copper conductor cable conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium density ISI marked with accessories concealed type run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet, concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.

Point wiring (modular) complete concealed with 2.5 sq.mm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories concealed wiring incl GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.

Point wiring complete surface type with 2.5 sq.mm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor cable conforming to IS 694 drawn through and incl non-metalicPVC casing caping ISI marked with accessories concealed wiring incl GI/ MS branded sunken boxes of suitable moodule concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. NOTE FOR Sl ITEM NO. 2.002 to 2.022 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring.

LED batten suitable for indoor applications 18/20 Watts,4 feet with polycarbonate housing and integrated LED channel with white arcylic cover complete with all accessories including taking out old fittings all as per Bajaj, Cat No.BCLAB 20 WH LED P / Havells Cat No: LHEXAPP7IN1W020 / C&S Cat no: LTTB4F20W LED EW BATTEN complete all as specified and as directed.

LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel with white arcylic cover complete with all accessories including taking out old fittings all as per Bajaj, Cat No.BCLAB 10 WH / Havells Cat No: LHEXACP5IN1W010 of Havells / C&S Cat No:LTTB2F 10WLEDW BATEN all as specified and as directed.

2' x 2' Recess mounted LED luminaire of capacity 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking out old fittings all as per Bajaj Cat No : BZRSQL 36W GZI WH / C& S Cat No. LTCRSLM36WATT2X2 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LEG lamp B22 base all as per model No. LHJE0110449 of Havells or equivalent make in Bajaji / Philips

Slim surface mounted round LED pane fitting of 18 watt aluminum die cast body with premiun diffuser to ensure glare free & even distribution of light. All as per Model No. LHEAAVP7IL1W018 of Havells or equivalent in Bajaj / Philips.

Modular switch 1 way, 6 Amps, one module complete all as specified and as directed.

Modular switch 1 way 16 Amps, one module complete all as specified and as directed.

Modular switch 2 way, 6 Amps, one module complete all as specified and as directed.

Modular bell push, 1 way, 6 Amps, one module complete all as specified and as directed.

Modular socket, 6 Amps, 2/3 pin combined, two module complete all as specified and as directed.

Modular socket, 6 Amps / 16 Amps, 2/3 pin combined, two module complete all as specified and as directed.

Modular fan regulator, five stepped, 120 Watt, 2 Module complete all as specified and as directed.

Switch piano flush button single pole two way 5 Amps with ISI marked complete all as specified and as directed.

Angle holder PVC/polycarbonate type all as specified and as directed.

Switch Piano, flush type, 5 Amps, 240 Volts single pole with ISI marked complete all as specified and as directed.

Switch socket combination 3 & 2 pin, 5 Amps, 240 Volts, flush type multipurpose controlled by one switch all as specified and as directed.

Switch socket combination 2 in 1, 3 pin and 2 pin, 5 and 15 Amps flush type, universal complete all as specified and as directed

Socket outlet 2 in 1, 3 & 2 pin 5 Amps all as specified and as directed

Bell push flush type, one way 5 Amps all as specified and as directed.

MCB single pole and neutral 240 Volts, 40 Amps including taking down the existing un serviceable MCB complete all as specified and as directed.

MCB single pole 240 Volts, 6 to 32 Amps including taking down the existing un serviceable MCB complete all as specified and as directed.

MCB TPN 415 volts 32 to 63 Amps including taking down the existing complete as specified and as directed.

MCB DB SPN 4 way 240 volts, double door, with 200 Amps rated busbar for housing MCBs including taking down the existing complete as specified and as directed.

MCB DB SPN 8 way 240 volts, double door, with 200 Amps rated busbar for housing MCBs including taking down the existing complete as specified and as directed.

MCB DB TPN 4 way with double door type 415 volts with 200 Amps rated busbar for housing MCBs including taking down the existing complete as specified and as directed.

Ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

Stepped type electronic fan regulator flush socket type including taking down the existing complete as specified and as directed.

Replacement of ding dong bell AC 230 volts single pole all as specified and as directed.

Sub main wiring power/circuit using FR PVC insulated unsheathed, 1100 volts grade, multi stranded copper conductor cable 2 single core of size 6 sq.mm, earth continuity conductor of size 6 sq.mm green in colour drawn through and including PVC conduit of suitable size, medium grade concealed in walls/roof/floors complete all as directed. NOTE:- Two wires of 6 sq.mm and one wire of 6 sq.mm and one run of PVC conduit shall be measured as one unit.

Sub main wiring power/circuit using FR PVC insulated unsheathed, 1100 volts grade, multi stranded copper conductor cable 2 single core of size 4 sq.mm, earth continuity conductor of size 4 sq.mm green in colour drawn through and including PVC conduit of suitable size, medium grade concealed in walls/roof/floors complete all as directed. NOTE:- Two wires of 4 sq.mm and one wire of 4 sq.mm and one run of PVC conduit shall be measured as one unit.

Earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge not less than 1.5 m below ground level connected to earth lead by GI wire 4 mm dia by means of bolts nuts, check nuts, washers made out of galvanised iron connected to main switch all as shown in elect plate No 3 of MES SSR Part -I includingn excavation and earth work in any type of soil,funnel, 20 mm dia light grade GI watering pipe with chamber of PCC 1:3:6 type C1 40mm thick of size 450mm x450mm (1:2:4) type B1 for cover slab reinforced with 8mm dia TMT bars 10cm c/c both ways and with 6mm MS hook etc complete all as specified including testing on completion all as specified and directed.

30 Watt LED building security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection including taking out old fittings all asper Bajaj, Cat No.:- ENXT P 30L WH SY PC SD or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Brackets made out of GI tubing medium grade 25 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc., applying two coats of aluminum paint over a coat of red oxide primer before fixing including removing the old existing GI bracket from building complete all as specified and as directed.

Sheet metal enclosure single pole and neutral with a two pin earth plug and socket with one single pole MCB 20 Amps, 230 Volts AC complete all as specifeid and directed.

Atom Engineers and Builders

Sreyas Enterprises