The work of underground and re-erection of 11 KV Line due to shifting for Bundelkhand Xpressway near ROW/Loop no. 55 of Channel no. 55884 under EUDD, Banda

THE WORK OF UNDERGROUND AND RE-ERECTION OF 11 KV LINE DUE TO SHIFTING OF 11 KV LINES OF KANWARA PAYJAL/LUKTARA/PAPRENDA FEEDERS FOR BUNDELKHAND EXPRESSWAY NEAR ROW/LOOP NO. 55 OF CHANNEL NO. 55884 FLY OVER NEAR VILLAGE MAWAI BUZURG FED FROM TULSI NAGAR/CHILLA ROAD 33/11 KV SUB-STATIONS at EDSD, CHILLA ROAD, BANDA under FULL DEPOSIT SCHEME YEAR 2022-23 under EUDD, BANDA (Turn-key), including carriage of all required material from E.S.C., BANDA to work site, alongwith its loading, unloading & dragging at the respective ends and also carriage of old/damaged scraped material from site to site/store centre, if any. All works like erection, fixing, installation, laying & grouting etc. shall be done by firm as per direction of Engineer incharge/RESSPO manual. During the erection of lines has to be done including cartage. Various type petty materials, which are not mentioned in scope of work, but actual required has to be arranged by contractor at his own cost. No extra payment will be made to such petty requirement, details of the work as given below

11 Mtr. long STP Poles

STONE PAD

ACSR Weasel conductor

11 KV 3x300 Sq.mm. Al. Cable XLPE

11 KV OUTDOOR CABLE JOINTING KIT 3x300 Sq.mm.

11 KV STRAIGHT THROUGH CABLE JOINTING KIT OF SIZE 3x300 Sq.mm.

GI PIPE 6 INCH DIA

MS DROPPER CHANNEL 100x50x2028 mm.

MS TOP CHANNEL 125x65x2240 mm.

HOLDING CLAMPS FOR CHANNELS, TPMO & FUSE SET WITH NUTS & BOLTS

11 KV Pin Insulator with pin & Nut

11 KV DISC INSULATOR WITH DISC FITTINGS

11 KV F BRACKET WITH NUT-BOLTS.

11 KV CROSS ARM V-TYPE

CROSS ARM HOLDING CLAMP WITH NUT-BOLTS.

Earthing complete by MS Earthing rod of 20x2500 mm & 6 SWG earthing wire

MS BASE ANGLE 75x75x6x2028 MM WITH CLAMP & NUT-BOLTS

Stay Set complete (Stay Rod 16x1800 mm, Stay Wire 5 Kg., Stay Clamp, Bolt & nuts with grouting), including the work of nozelling etc. as per RESSPO manual. (arrangement of grouting material by firm).

MS T-OFF CHANNEL 125x65x1300 MM. WITH HOLDING CLAMP & NUT-BOLTS.

DANGER BOARD WITH CLAMP & NUT-BOLTS

GI BARBED WIRE

ALUMINIUM PAINT

RED OXIDE PAINT

140 MM. O/D PN-4 PE-80 GRADE UV STABLIZED HDPE PIPE AS PER IS:4984 OF 6 METER EACH

HOT DIP GALVANISED CABLE SUPPORT CLAMP FOR 300 Sq.mm. 3 core cable

LAYING OF 11 KV 3x300 Sq.mm. Al. Cable XLPE BY HDD MACHINE ON HDPE PIPE. THE WORK INCLUDES COST OF COMMISSIONING OF 11 KV CABLE JOINTING KITS AND MAKING ALL SUITABLE ARRANGEMENTS TO GET THE WORK DONE. CABLE HOISTING AND MAKING LOOPS AT BOTH ENDS ARE ALSO INCLUDES IN THE WORK.

Erection of single support structure on 11 Mtr. ST Pole, including complete HT/LT fittings as per direction of Engineer incharge/RESSPO manual.

Erection of double pole structure on 11 Mtr. ST Pole, including complete HT/LT fittings as per direction of Engineer incharge/RESSPO manual.

Erection of tri-pole structure on 11 Mtr. ST Pole, including complete HT/LT fittings as per direction of Engineer incharge/RESSPO manual.

Concreting/Grouting of erected 11 Mtr. long STP Poles as single pole structure as per direction of Engineer incharge/RESSPO manual. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement. (arrangement of grouting material by firm).

Concreting/Grouting of erected 11 Mtr. long STP Poles as double pole structure as per direction of Engineer incharge/RESSPO manual. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement. (arrangement of grouting material by firm).

Concreting/Grouting of erected 11 Mtr. long STP Poles as tri-pole structure as per direction of Engineer incharge/RESSPO manual. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement. (arrangement of grouting material by firm).

DISMANTLING OF PCC POLES AFTER OPENING OF ALL HT/LT FITTINGS.

DISMANTLING OF ST/RAIL POLES AFTER OPENING OF ALL HT/LT FITTINGS, INCLUDING THE WORK OF IT'S CARRIAGE FROM WORK SITE TO ESC ALONGWITH LOADING, UNLOADING & DRAGGING.

CUTTING OF ST/RAIL POLES, INCLUDING THE WORK OF IT'S CARRIAGE FROM WORK SITE TO ESC ALONGWITH LOADING, UNLOADING & DRAGGING.

DISMANTLING OF WEASEL CONDUCTOR ALONGWITH MAKING IT'S ROLL, INCLUDING THE WORK OF IT'S CARRIAGE FROM WORK SITE TO ESC ALONGWITH LOADING, UNLOADING & DRAGGING.

DISMANTLING OF DP STRUCTURE WITH TF SHIFTING.

AMIT ENGINEERING CORPORATION

NATIONAL CONTRACTOR & GENERAL ORDER SUPPLIER

M/S MAA VISHARI DEVI ENTERPRISES

HARVITEC ENTERPRISES PVT LTD