Construction of Girls Hostel at EJM college Leh (by way of sanitary, Railing and Elevator)

Structural steel work riveted, bolted or welded in builtup sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, complete job.

Providing and laying 60mm thick faciory made cement in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) )

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete

Trenching in ordinary soil upto a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressingup, inembankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m : All kinds of soil

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12(1 cement :6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing & fixing false ceiling at all height including providing & fixing of frame work made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimetre channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimetre of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimetre channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimetre channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 9 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulosefiber manufactured through autoclaving process.

Providing and fixing wash basin with C.I. brackets,15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450mm with a pair of 15mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. bracket sand stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460 mm bowl depth 200 mm.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : Rectangular shape 1500x450 mm

Providing and fixing toilet paper holder : Vitreous china

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.

Providing and fixing flow trap of PVC.

Providing and fixing soil, waste and vent pipes a) 100mm dia PVC

a) 75mm dia PVC

Providing and fixing of plain bends of required degree. a) 100mm dia PVC

b) 75mm dia PVC

Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes SDR 7.4UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Chajge. (Concealed work including cutting chases and making good the walls etc.,) a) PN-16 Pipe, 25 mm OD (SDR-7.4)

b) PN-16 Pipe, 32 mm OD (SDR-7.4)

c) PN-16 Pipe, 40 mm OD (SDR-7.4)

Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes SDR 7.4UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at1.00m spacing. This includes testing of joints complete as per direction of Engineer in Charge. (Internal work exposed on wall) a) PN - 16 Pipe, 25mm OD (SDR-7.4)

b) PN - 16 Pipe, 32mm OD (SDR-7.4)

c) PN-16 Pipe, 40 mm OD

Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes SDR 7.4UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-Rplain & brass threaded polypropylene random fittings i/c trenching. refilling & testing of joints complete as per direction of Engineer in Charge. (External work) a) PN - 16 Pipe, 32 mm OD (SDR-7.4)

b) PN-16 Pipe, 40 mm OD

c) PN-10 Pipe, 50 mm OD

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing of material for the insulation of Water Storage Tank of with nitrile sheet , tapping with cello tape , Rockwood 6 inch per side, wire mesh, polythene, aluminum sheet 26 gauge cladding with dia of , complete job. 19 mm thick nitrile sheet

Providing and fixing of material for the insulation of pipe with nitrile tube , tapping with cello tape , Rockwood 6 inch per side, wire mesh, polythene , tapping with cello tape aluminum sheet 26 gauge cladding with dia . complete job including carriage. a) 19 mm thick, 50 mm dia (OD) ( PPR 32 mmm)

b) 19 mm thick, 50 mm dia (OD) ( PPR 40 mmm)

c) 19 mm thick, 50 mm dia (OD) ( PPR 50 mmm)

Providing and fixing of material for the insulation of pipe with nitrile tube , tapping with cello tape for inner wall fittings . complete job including carriage. 19 mm thick, 50 mm dia (OD) ( PPR 25 mmm)

Providing and fixing heat tape 33Watt on PPR pipes made of denforced or chromelox or equivalent make, as approved by Engineer In Charge , complete Job

Providing and fixing thermostat complete job.

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia.

ProvidingandfixingP.V.C.wastepipeforsinkorwashbasinincludingP.V.C.waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : Providing and fixing uplasticised PVC connection pipe with brass unions : 20 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 150 mm diameter

Constructing masonry Chamber 60x60x75cm, inside with 75 class designation brick work in cement mortar 1:4(1cement :4coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix(1cement: 2 coarses and :4 graded stone aggregate 20mm nominal size) necessary excavation 7 foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar1:3(1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Supply installation testing and commissioning for thirteen passenger lift for Building of weight not less than544 kg with complete accessories and of maker OTIS, KONE, Mitsubishi, Shindler, Thysonkrup, Jhonson all complete job.

Servo voltage stabilizer, Design, Supply, installation, Testing and commissioning of Fully automatic servo voltage regulator duly filled with recommended oil upto full capacity type fully automatic servo voltage regulator Tating = 34 KVA, Input voltage range (phase to phase) = 270-460 V Output wave form = Trup to Input, Input Frequency = 45-55 Hz, Response Time = 10 Msec, Correction Speed = 25-65 V/Sec Correction Method = Stopless correction, Cooling = oil, Efficiency = Better than 98%, Control circuit = Fully automatic IC Based Solid State, Cperation = Fully Automatic, Suitablity = Suitable for 3-phase, unbalanced supply, unbalanced load, Operating temperature Ambient = -15 C to 45 C above, Additional features like Hign and low voltage cutoff system, overload and short circuit protection, single phase prevention system, phase sequence change pretection, earth fault protection, high grade CRGO Lamination, single rugged construction, 99.9% pure copper wiring, high efficiency, negligible 2 wave form and power factor distorting, smooth and step less voltage control

Providing Maintanance free earthing long life maintenance free electrolytic earthing system with 10 feet verticle type copper, not less than 2*(50.8mm)ID and not less than 0.08*(2.2mm) wall thickness, which does not rrequire manual addition of water. The system should be corrosion resistant pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the eands, Rated for high fault currents has bar rated for 10KA, fault current bus bar connection type as "Terraweld" to the hold temperature of 7000 C. The earthing port shall be designed and supplied with poly plastic port cover non conductive, environment friendly and lockkable Job including Digging, installaion of 2 roads, filling earth, levelling and disopsal etc,

Electric wiring and lighting. Light point shall be provided in the lift well at a space not exceeding 3m. All the light point shall have control form the machine with proper switches and conduits socket outles may also be rpvided at a suitable plae for use by the maintenance staffa bove the ground for landing.

Cabling Supply and laying of the following 1100 volts grade, copper conductor, XLPE insulated, PVC shealthed, armoured cables as per IS 7898 Part - 1 10 SQMM, 4-Core armoured cable with copper conductor from auxilary control panel to be istalled at main control room outside the building to the machine room with proper lugs/thimbling