SPL REPAIR/REPLACEMENT OF UNSV PIPE LINE AND CONNECTED ITEMS FOR ZORAWAR MARG AREA AND OTHER MISC SANCTIONED WORK AT ITARANA MIL STN ALWAR

Amount

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation etc or for laying of cables, pipes etc and getting out in soft/loose soil complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.

Taking up or down GI tubing and connections of 15 mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Taking up or down GI tubing and connections of 20 mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Taking up or down GI tubing and connections of 50 mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Taking up or down GI tubing and connections of 80 mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Taking up or down GI tubing and connections of 100 mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Taking up or down GI tubing and connections of 150 mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 15 mm bore with & including all fittings complete Fixed to walls , ceilling or laid in floors.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete laid in trenches. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 50mm bore with & including all fittings complete laid in trenches. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 80mm bore with & including all fittings complete laid in trenches. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L , jointing and testing of all kind for of DI (Ductile Iron) pipe, round flanged end on both sides of 100 mm dia , K-7 complete with rubber gasket nuts, bolts and washers inside OPC coated, white painted inside and black painted on out side complete including taking down old unsv pipe all as specified and as directed by Engineer-in-Charge.(Make : Jindal/ Electro Steel/ Tata).

M&L , jointing and testing of all kind for of DI (Ductile Iron) pipe, round flanged end on both sides of 150 mm dia , K-7 complete with rubber gasket nuts, bolts and washers inside OPC coated, white painted inside and black painted on out side complete including taking down old unsv pipe all as specified and as directed by Engineer-in-Charge.(Make : Jindal/ Electro Steel/ Tata).

S&F in repairs saddle piece with suitable drilled hole made out of mild steel flat iron 50x3mm of size 50mm x 20mm for taking branch connection of 20mm bore from 50mm bore main pipe line including necessary excavation & earth work in any type of soil complete all as specified & as directed.

S&F in repairs saddle piece with suitable drilled hole made out of mild steel flat iron 80x3mm of size 80mm x 20mm for taking branch connection of 20mm bore from 80mm bore main pipe line including necessary excavation & earth work in any type of soil complete all as specified & as directed.

S&F in repairs 20 mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked.

Boring holes under road pavement by bocky manually, in any type of soil upto 200 mm bore Complete all as specified and as directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, complete, all as specified & directed including dismantling & taking out old unserviceable sluice valve. Make-Kirloskar/Kartar/Zoloto/BIR

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, complete, all as specified & directed including dismantling & taking out old unserviceable sluice valve. Make-Kirloskar/Kartar/Zoloto/BIR

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, complete, all as specified & directed including dismantling & taking out old unserviceable sluice valve. Make-Kirloskar/Kartar/Zoloto/BIR

M&L for construction of brick masonry valve pit of size 1350mm x 1000mm x 1200mm (internal dimension) (Type'E') all as Specified and as shown on drawing no. TD/2004/26 Sheet No 1/3 to 3/3 including excavation and earth work in any type of soil, PCC in foundation, coping, plastering,fabrication of valve pit chamber cover made out of angle iron frame and MS plates of thickness 3 mm with locking arrangement, 50mm dia lock with 03 keys, including of openable arrangement by heavy duty MS Hings of suitable size painted with synthetic enamelled paint (Blue colour) over a coat of primer including grouting of frame in PCC or brick work with plaster and final touch with double layer of white wash complete all as specified and directed.

S&F LED street light fitting 100 watt 230V AC for all weather conditions with excellent thermal management, made with pressure die cast housing with toughened glass and high power LED'S with secondary optics and IP66 protection efficiencyof 110/120 lumen per watt along with 10kv surge protection device including all fixing accessories complete. Make : Crompton RAPTOR NEO Cat No- TRP-411-100-57-SL-GL-NSG /Havells/Bajaj

S&F of street light bracket made to shape at required angle made out of 40 mm dia ( light grade ) GI tubing of length not less than 1.2m long suitable for fixing /holding street light fittings including mild steel flate iron 50 x 6 mm clamp 02 Nos with bolts, nuts and washer complete all as specified & directed.

S&F of pole mounted juction box made out of one piece moulded SMC IP65 protection having aluminium bus bars 100 Amp single phase and neutral with one No MCB SPN 6 Amp for street light, cable entry from bottom, maintenance free size 300x200x100 mm fixing on pole with MS flat 25x3mm clamp including nut bolts front openable all as specified and directed.

S&F of 2.5 sqmm, PVC insulated and FRLS PVC Round Sheathed, twin core Copper Conductor (flexible) industrial cable, 1100 Volts, conforming to IS: 694, from street light feeder/junction box to street light fittings Make : Havells / Finolex / Polycab

S&F in repairs steel tubular swaged pole 09 meter long type 410 SP-31 with & including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.20 metre height from top of PCC coping/pedestal and applying two coats of aluminium paint over a coat of aluminium red oxide primer to remaining portion of pole and marking pole number and including dismantling and taking down old unserviceable pole 09 metre long all as specified & as directed. Make : NTC, India Tube co, Bombay Tube, Jindal steel product. Note : (i) Excavation & earthwork, PCC in foundation & coping shall be measured and paid for separately. (ii) Serviceable street light fitting and pole mounted junction box taking out from us pole and same refixing the new pole.

M&L for rigid steel conduit, welded/threadeded of 20 mm dia for protection of wire fixing on pole as required with 2 Nos clamps complete all as specified and directed by Engr-in-Charge.

M&L for earthing in repairs complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc. as shown in electrical plate No. 3 of SSR Part-I and connection to main switch board/test point/panel/equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus soil to a distance not exc. 50m, charcoal and salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20mm bore for watering and 15mm bore 3m long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shallb e provided o CI frame etc.complete all as specified & as directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Make : Havells/Grandlay/Polycab. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

M & L for sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed. Note :- Thickness after punning shall be considered for payment.

M/L for brick work with FLY ASH BRICKS as Per IS-13757(1993) burnt clay fly ash building bricks, with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

Surface dressing n exc 15 cm deep

Excavating in post holes (or similar) each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm as in soft/loose soil.

M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L for PCC Type D2 1:4:8 (40 mm graded stone aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate), as in pathway/hardstanding laid in alternate ways each panel not exc 3.00 sqm finished the surface even and fair without using extra cement complete all as specified& directed

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate), 25mm thick, as in Sub base complete all as specified& directed

M&L non skid ceramic tiles colored 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified& directed

M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed

M&L for rendering 15mm thick in CM 1:4 on stone/brick wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound all as specified.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified& directed

S&F MS steel work in tubular trusses and tubular posts, purline, rafter including special shaped washers etc., complete using but welded. RHS/SHS confirming to IS 4923 : 1997 complete all as specified & directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified & directed

S/F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as directed

S&F Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified & directed

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floor/fixed to walls complete all as specified & directed

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors/wall complete all as directed

S&F PVC (SWR) bends 110mm dia any radius.

S&F PVC (SWR) junction single (Single T) equal or unequal with access door 110mm dia.

S&F Stop/angle valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed

S&F Rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl necessary fitting i.e. nipple, socket, union, reducer, tank nipple etc complete all as specified & directed

S&F Ball brass valves, high pressure,20mm bore, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in position all as specified

S&F 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & as directed.

S&F 15mm dia PVC connecting pipe 450mm long with PTMT nuts of suitable size at both ends complete all as specified & as directed.

S&F in Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including brackets complete all as specified and directed.

S&F Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified including taking down existing pillar tap and removing the same to store

M&L 75 mm thick PCC(1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified& directed

S&F mild steel TMT bars 10 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipscomplete all as specified & directed.

Form work to soffits of suspended slabs and similar works not exc. 200mm thick surfaces of concrete.

M&L for RCC Type B0 1:2:4 (12.5mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified& directed by Engr-in-Charge.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types and over screed bed 20 mm thick CM 1:6 cement concrete complete.

PD GUPTA AND COMPANY (BID ID -3429712)

DEMROT ELECTRICAL WORKS (BID ID -3435949)

S.R.Enterprises (BID ID -3437290)

Shiv Enterprises (BID ID -3437088)