Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹18.5 L+₹2.0 L (11.9%)Rejected-Finance 0000 UNNAMED ROAD GAJIYA KANTIT VINDHYACHAL MIRZAPUR UTTAR PRADESH 231307 | MIRZAPUR | UTTAR PRADESH | 231307 | L2 | Rejected-Finance Being not L1 | |
| 3 | L3₹22.0 L+₹5.5 L (33.0%)Rejected-Finance 5B FF NAND VIHAR AZAD NAGAR NEAR GODARA PETROL PUMP HISAR HARYANA 125001 | HISAR | HARYANA | 125001 | L3 | Rejected-Finance Being not L1 | |
| 4 | L4₹23.1 L+₹6.5 L (39.3%)Rejected-Finance | L4 | Rejected-Finance Being not L1 | |
| 5 | L5₹23.4 L+₹6.9 L (41.6%)Rejected-Finance | L5 | Rejected-Finance Being not L1 |
| Sl No | Description | Qty | Unit | SUN MANN ENGINEERS L3 | R. P. Suppliers and Construction Co. L4 | DUGGAL CONSTRUCTION CO L1 | J.K & Company L2 | ASHWANI SETHI L6 | M/s Parv Enterprises L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down existing LT panel by disconnecting all incoming and outgoing cables, earthing connection, dismantling PCC and making good the disturbed surface all as directed. | 2 | Each | 100 ₹200 Lowest | 500 ₹1,000 | 100 ₹200 Lowest | 250 ₹500 | 1,000 ₹2,000 | 500 ₹1,000 |
| 2.00 | Dismantling & taking down existing ACSR conductor of any size by opening the binding wire from HT/LT electric poles complete all as specified. | 2.3 | Qtl | 100 ₹230 Lowest | 500 ₹1,150 | 100 ₹230 Lowest | 100 ₹230 Lowest | 500 ₹1,150 | 700 ₹1,610 |
| 3.00 | Supply fabricating erecting LT panel outdoor type CPRI approved double door totally enclosed weather and vermin proof suitably ventilated 415 Volts 50 cycles, AC supply factory made fully compart mentalized made out of 3.00 mm thick CRCA sheet for laod bearing and 2.00 mm thick for nonload bearing protection of enclose IP 54 as per IS 2147 of 1962 with pretreatment and powder coated of approved colour including suitable size of abgle iron/flat iron frame work/ support required civil works, excavation & earth work, PCC foundation etc, installation, testing & commissioning with including the following :- (a) Aluminium bus bar of capacity 400 Amps for phase and 200 Amps for Neutral.
(b) Ammeter 0 to 500 Amps digital type with built in selector switch CTS of suitable ratio (Set of Three)
(c) Voltmeter 0 to 500 volts digital type
Incoming : (i) MCCB, FP,250 Amps, 36 KA. 415 Volts 4 pole (Thermal Magnatic and microprocessor release- 01 No
Outgoing : (i) MCCB, FP,200 Amps, 36 KA 415 Volts (adjustable thermal and magnatic type70% to 100%) - 01 No .
(ii) MCCB, FP,125 Amps, 16 KA, 415 Volts (adjustable thermal and magnatic type70% to 100%)- 02 No
(III) MCB, TPN,63 Amps, 16 KA - 02 Nos
(Iv) Digital type Digital Timer switch suitable for 3 phase, 415 volts AC supply for street light feeder programmable 1 min, with backup for 6 years, 28 memory locations, current capacity 10 Amps weekly program with 1 changeover (1co) total 28 programs Model No DIN, Type ECO weekly with 1 CO. | 1 | Each | 1,20,186 ₹1,20,186 | 1,65,000 ₹1,65,000 | 97,000 ₹97,000 Lowest | 1,06,000 ₹1,06,000 | 1,99,000 ₹1,99,000 | 98,000 ₹98,000 |
| 4.00 | Supply fabricating erecting LT panel outdoor type CPRI approved double door totally enclosed weather and vermin proof suitably ventilated 415 Volts 50 cycles, AC supply factory made fully compart mentalized made out of 3.00 mm thick CRCA sheet for laod bearing and 2.00 mm thick for nonload bearing protection of enclose IP 54 as per IS 2147 of 1962 with pretreatment and powder coated of approved colour including suitable size of abgle iron/flat iron frame work/ support required civil works, excavation & earth work, PCC foundation etc, installation, testing & commissioning with including the following :- (a) Aluminium bus bar of capacity 300 Amps for phase and 200 Amps for Neutral.
(b) Ammeter 0 to 500 Amps digital type with built in selector switch CTS of suitable ratio (Set of Three)
(c) Voltmeter 0 to 500 volts digital type
Incoming : (i) MCCB 4P 125 Amps, 16 KA 415 Volts 4 pole (Thermal Magnatic and microprocessor release- 01 No
Outgoing : (i) MCCB 4 pole 100 Amps 16 KA 415 Volts (adjustable thermal and magnatic type70% to 100%) - 02 No .
(ii) MCCB 4 pole 63 Amps 16 KA, 415 Volts (adjustable thermal and magnatic type70% to 100%)- 02 No
(III) MCB TPN 63 Amps - 02 Nos
(Iv) Digital type Digital Timer switch suitable for 3 phase, 415 volts AC supply for street light feeder programmable 1 min, with backup for 6 years, 28 memory locations, current capacity 10 Amps weekly program with 1 changeover (1co) total 28 programs Model No DIN, Type ECO weekly with 1 CO cat part No TDA44196. Make – Indo Asian or equivalent in Legrand/Siemens | 1 | Each | 98,000 ₹98,000 | 1,25,000 ₹1,25,000 | 87,000 ₹87,000 Lowest | 97,000 ₹97,000 | 1,60,000 ₹1,60,000 | 95,000 ₹95,000 |
| 5.00 | Taking down old unsv bus bar Panel any type and S&F of new aluminium busbar panel TPN 200 Amp , 415 volt complete all as specified and as directed.
Make : Havells/Indo Asian/Legrand or equivalent in list of Makes as per Appx B-1. | 13 | Each | 3,000 ₹39,000 | 10,000 ₹1,30,000 | 3,000 ₹39,000 | 6,380 ₹82,940 | 1,000 ₹13,000 Lowest | 5,500 ₹71,500 |
| 6.00 | Taking down old unsv bus bar any type and S&F of new aluminium busbar panel TPN 100 Amp , 415 volt complete all as specified and as directed.
Make : Havells/Indo Asian/Legrand or equivalent in list of Makes as per Appx B-1. | 7 | Each | 2,000 ₹14,000 Lowest | 5,000 ₹35,000 | 3,000 ₹21,000 | 4,380 ₹30,660 | 5,000 ₹35,000 | 5,000 ₹35,000 |
| 7.00 | S&F in replacement of factory made powder coated Vertical DBs TPN ,440 V, 4 Way, in double door suitable for flush mounting and surface mounting with 250 A copper busbar for each phase with 2 neutral bar, 2 earthbar and cable ties for cable management and fully insulated busber and shrouded neutral bars with provision of 100 A FP MCCB as Incomer and SP 6 to 32 Amps and 40 to 63 Amps for out going including taking down UNSV DBs complete all as specified and as directed. | 15 | Each | 8,497 ₹1,27,455 | 12,000 ₹1,80,000 | 2,200 ₹33,000 Lowest | 6,450 ₹96,750 | 15,000 ₹2,25,000 | 15,000 ₹2,25,000 |
| 8.00 | M & L for earthing complete with galvanized iron or steel or steel earth plate electrode of size 60cmx60cmx6.3mm thick buried directly in ground, vertically to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at depth of not less than 1.5 mtr below ground level surrounded from all sides with alternate layers of charcoal and common salt and connected to GI Strip of size 32x6 mm by means of GI bolts, nuts washers & check nuts electrode connected to main switch board or main control board or on poles or on transformer and GI pipe light grade 20 mm bore for watering including providing funnel and wire mesh GI frame and 10 cm thick suitably reinforced RCC pit cover PCC chamber pit with PCC 1:3:6 type C2 using 40mm graded stone aggregates complete including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown in plate No 5 of SRR-1991 Part-1 . | 20 | Each | 3,800 ₹76,000 | 3,000 ₹60,000 | 2,900 ₹58,000 Lowest | 3,000 ₹60,000 | 3,500 ₹70,000 | 4,000 ₹80,000 |
| 9.00 | M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. | 10 | Each Job | 2,800 ₹28,000 | 3,000 ₹30,000 | 2,700 ₹27,000 Lowest | 2,800 ₹28,000 | 3,000 ₹30,000 | 3,800 ₹38,000 |
| 10.00 | Taking out old defective underground cable from trenches/ floors/road/wall /pipe/ pole LT cable of any size/ description including segregating the serviceable cable by cutting down defective portion after testing by meggar and relaying complete all as specified and as directed.
Note : Excavation and earth work will be measured separately under respective item | 200 | RM | 100 ₹20,000 | 10 ₹2,000 | 5 ₹1,000 Lowest | 5 ₹1,000 Lowest | 20 ₹4,000 | 40 ₹8,000 |
Tender Value
₹32.5 L
EMD Value
₹65,000
Closing Date
25 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Ashish Kanyan
GE Kapurthala
Repairs/replacement and maintenance of LT overhead lines, UG Cables, Allied works at Mil Stn Beas and Jandiala Guru under GE Kapurthala.
2025_MES_718055_2
8079/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Area under GE Kapurthala
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Kapurthala
₹65,000
16 Oct 2025
4 Aug 2025
27 Aug 2025
4 Aug 2025
25 Aug 2025
11 Aug 2025
Amount
Taking down existing LT panel by disconnecting all incoming and outgoing cables, earthing connection, dismantling PCC and making good the disturbed surface all as directed.
Dismantling & taking down existing ACSR conductor of any size by opening the binding wire from HT/LT electric poles complete all as specified.
Taking down old unsv bus bar Panel any type and S&F of new aluminium busbar panel TPN 200 Amp , 415 volt complete all as specified and as directed. Make : Havells/Indo Asian/Legrand or equivalent in list of Makes as per Appx B-1.
Taking down old unsv bus bar any type and S&F of new aluminium busbar panel TPN 100 Amp , 415 volt complete all as specified and as directed. Make : Havells/Indo Asian/Legrand or equivalent in list of Makes as per Appx B-1.
S&F in replacement of factory made powder coated Vertical DBs TPN ,440 V, 4 Way, in double door suitable for flush mounting and surface mounting with 250 A copper busbar for each phase with 2 neutral bar, 2 earthbar and cable ties for cable management and fully insulated busber and shrouded neutral bars with provision of 100 A FP MCCB as Incomer and SP 6 to 32 Amps and 40 to 63 Amps for out going including taking down UNSV DBs complete all as specified and as directed.
M & L for earthing complete with galvanized iron or steel or steel earth plate electrode of size 60cmx60cmx6.3mm thick buried directly in ground, vertically to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at depth of not less than 1.5 mtr below ground level surrounded from all sides with alternate layers of charcoal and common salt and connected to GI Strip of size 32x6 mm by means of GI bolts, nuts washers & check nuts electrode connected to main switch board or main control board or on poles or on transformer and GI pipe light grade 20 mm bore for watering including providing funnel and wire mesh GI frame and 10 cm thick suitably reinforced RCC pit cover PCC chamber pit with PCC 1:3:6 type C2 using 40mm graded stone aggregates complete including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown in plate No 5 of SRR-1991 Part-1 .
M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.
Taking out old defective underground cable from trenches/ floors/road/wall /pipe/ pole LT cable of any size/ description including segregating the serviceable cable by cutting down defective portion after testing by meggar and relaying complete all as specified and as directed. Note : Excavation and earth work will be measured separately under respective item
Supply, Laying, jointing and testing XLPE PVC insulated & PVC sheathed LT cable, 1100 volts grade (heavy duty) with stranded aluminium conductor, cross sectional area 10 Sqmm 2 core fixed along the poles or passing through pipes or laid under floors or through walls complete all as specified. Note (i) Earthwork, sand cushioning, brick protection and GI pipe to be measured and paid for separately under respective items.
All as per description of serial item no.11 here in before but cross sectional area 16 Sqmm 2 core complete all specified.
All as per description of serial item no.11 here in before but cross sectional area 16 Sqmm 4 core complete all specified.
All as per description of serial item no.11 here in before but cross sectional area 25 Sqmm 4 core complete all specified.
All as per description of serial item no.11 here in before but cross sectional area 35 Sqmm 3½ core complete all specified.
All as per description of serial item no.11 here in before but cross sectional area 50 Sqmm 3½ core complete all specified.
All as per description of serial item no. 11 here in before but cross sectional area 70 Sqmm 3½ core complete all specified.
All as per description of serial item no. 11 here in before but cross sectional area 95 Sqmm 3½ core complete all specified.
All as per description of serial item no. 11 here in before but cross sectional area 120 Sqmm 3½ core complete all specified.
Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out including trimming of sides complete all as specified and directed.
Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed.
Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. Note : For payment purposes 18cm thickness shall be considered.
Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge. (for LT Cable )
Supply and fixing in replacement for GI protection pipe 50mm bore light grade for cable protection incl all fittings laid in trenches or fixed on pole complete all as specified and as directed.
Supply and fixing in replacement for GI protection pipe 80mm bore light grade for cable protection incl all fittings laid in trenches or fixed on pole complete all as specified and as directed.
J.K & Company (BID ID -3405925)
SUN MANN ENGINEERS (BID ID -3397525)
R. P. Suppliers and Construction Co. (BID ID -3403270)
M/s Parv Enterprises (BID ID -3392826)
ASHWANI SETHI (BID ID -3405912)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .