RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled Yes Handloom Blanket- Relief ( 8000 pieces ) ( Under PAC ) Make uphandlooms Model 2019 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) DESCRIPTION Description of item Handloom Blanket- Relief * MANUFACTURE Item is manufactured by using handloom and not by powerloom Yes * 1/4 SIZE Size ( Length X Width ) (cm) 235 cm X 140 cm * MATERIAL Composition 70% Wool (min) and remainder Polyester 70% Wool (min) and remainder Polyester Average Fibre Diameter ( Micron ) 31.00 to 32.69 (as per IS 744) * Ends per dm 80 ±5% * Picks per dm 80 ±5% * Weave 2/2 twill * Finish Milled and Raised * Mass of Blanket 2.2 kg ±5% * Breaking Load Warp (min) 1080 N (15 x 20 cm strips between grips as per 1969) * Breaking Load Weft (min) 830 N (15 x 20 cm strips between grips as per 1969) * Relaxation in Shrinkage
RequiredPercentage (max) 4 (as per IS 665) * Scouring Loss
RequiredPercentage (max) 4 (as per appendix A of IS 894) * The blanket is properly washed and free from grease
Requiredsoap
Requiredfilling and any other admixture which would give fictitious mass or firmness Yes * COLOUR Colour As Per Buyers Requirement * Colour Fastness to Light 4 or better (as per IS 2454) * Colour Fastness to Washing 3 or better (As per IS/ISO 105-C 10
RequiredTest A (1)) * Colour Fastness to Organic Solvent 4 or better (as per IS 688) * PIPING Piping As per Clause 2.2.2 of IS 894 * Sewing Thread 100 dtex X 3
RequiredCotton Sewing Thread
Requiredas per IS 1720 latest
Requiredof matching colour * OTHER REQUIREMENTS Moth Proofing Moth Proofed (As per IS 11662) * 2/4 The Mothproofing chemicals used
Requiredthe minimum residual content and the method of test for determining the same (Hint Enter not applicable
Requiredif blanket is not moth proofed) IF DEMAND * LOGO AND MARKING Logo/Totem As per buyer's requirements As per buyer's requirements Handloom Mark No Yes
RequiredNo TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification Yes * Test Report No IF DEMAND * Test Report Date IF DEMAND * Name of the Lab IF DEMAND * Address of The Lab IF DEMAND * Test reports to be furnished to buyer on demand
Requiredif claimed to be available Yes * ADVANCE SAMPLE Agree to provide Advance Sample(s) for buyer's approval before commencement of supply Yes Yes * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
