A/R and M/O various Type-1 to Type-VI of GAD at Kasumpti, Shimla-9

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:2:4 (one cement : two coarse sand) : four graded stone aggregate 20 mm (twenty milimetre) nominal size)

Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings, framed guards bars ladders, railing, brackets and similar work.

Steel work welded in hollow sections sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings, framed guards bars ladders, railing, brackets and similar work.

Provdiing and fixing polycarbonated sheet 2.00mm thick in lining with galvanised self driven screws complete with all accessories as required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-charge. make TATA Dura shine

Scaffolding in building side including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. ( MS Pipe 40 mm dia ( Medium )

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)For thickness of tiles 10 mm to 25 mm

Providing and laying vetrified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (a) Concealed work, including cutting chases and making good the walls etc. (i) 20mm ( twenty milimetre) nominal outer dia Pipes

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm nominal bore MAKE ESS ESS

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15 mm nominal bore MAKE ESS ESS

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (a)90 mm dia.

Providing and fixing PVC floor trap of self cleaning designwith sand cast iron screwed down or hinged gratting without vent arm complete including cost of cutting and making goods the wall and floors including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 110 mm x90 mm

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 90mm dia.

Providing and fixing PVC Collers ISI including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)90 mm dia.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 90 mm dia.

Providing and fixing one piece water closet ovel shaped white including carriage of materials in all leads as per directions of the Engineer-in-Charge. Make ESS ESS

Providing and fixing hand faucet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS

Providing and fixing 100 mm sand cast iron grating for gully trap materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Make ESS ESS

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS

Providing and fixing 600x450 mm beveled edge mirror of Cabnit of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws:- including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (E.S) MAKE ESS ESS

Providing and fixing unplasticied PVC connection pipe with PTMT nuts coller and bush of approved quality and colour ( 15 mm nominal bore with 45 cm length make viking

Providing and fixing PVC waste pipe for wash basin & sink including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 32mm dia. make Viking

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., including carriage of materials upto all leads and lifts as per the direction of the Engineer-in-Charge. Make ESS ESS

Providing and fixing corner including carriage of materilas in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESSS

Providing and fixing Toilet papere holeder approved quality conforming to IS:8931 ( 15mm nominal bore make ESS ESSS

Providing and fixing tumbler approved quality conforming to IS:8931 ( 15mm nominal bore make ESS ESS .

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 40mm thick (i)2nd class deodar wood.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)40mm thick 2nd class deodar wood

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 75x10 mm

Providing and fixing Brass sliding door bolts , ISI marked with nuts and screws etc , complete 250x16

Providing and fixing 1500mm bright finished aluminium floor door stopper with rubber cushion screws etc to suit shutter thickness complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing square edges cover fillets (beading) 25mmx6mm(Nineteen milimetre into six milimetre) section i/c mitring at junctions with wood screws and nails complete including carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge.(i)1st class Indian teak wood .

Renewing glass panes with putty and nails wherever necessary including racking out the old putty float glass panes of nominal thickness 4 mm ( weight not less than 10kg / Sqm )

Providing and fixing 450x120 mm mirror with 19 mm back ply carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge .

Providing and fixing Hydraulic Door Closer including carriage of materials in all leads and lifts per directions of Engineer - in - Charge .

Providing and MS hinges and welding complete including carriage of materials in all leads and lifts per directions of Engineer - in - Charge .

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting including carriage of materials in all leads as per directions of the Engineer-in-Charge.

Painting two coat (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint

Providing and fixing PVC Ceiling with screwor nail including carriage of materials in all leads and lifts per directions of Engineer - in - Charg

Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 9mm thick thick

Providing and fixing Pine wood lining tonged and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface ( 12 mm thick ) with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 12mm thick

Providing and fixing bubble plastic sheet for panelling including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Polishing two coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Applying sealar on wood and wood based surfaces to given an even surfaces including cleaning the surfaces of all dirt,dust and sand papering so as to produce a smooth dry and matt surface including stopping & knotting including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.