Tiruvannamalai City Municipal Corporation Supply and Installation of 380 KVA for Clear Water Pump House at Ulagalapadi Head Works Water Treatment Plant in Tiruvannamalai City Municipal Corporation

CUMMINS Power Generator- DG set of 380 AMF Control Panel 1)Power Generator installation configurations as defined in CPWD General Specifications for Electrical works - Part VII (DG Set)- Fixed (Power Generators are permanently installed)" 2)Nominal Rated Capacity (kVA) - 380 3)Rated Engine Power (kWm) - 100 % of the required powered at STP(Standard Temperature Pressure) i.e equal to (Nominal Rated Capacity (KVA) of power generator + Any Auxilary power Consumption by the Power generator) x Power factor(0.8) / Alternator efficience 4)Type of governer - Electronic 5)Rated RPM of Engine (RPM) - 1500 6)Fuel - High Speed Diesel (HSD) 7)Voltage Regulation Grade - VG 2 8)Control Panel - AMF Control Panel 9)Trailer - NA for Fixed/Skid Mounted Power Generator 10)Pay load of the Trailer - 0 kilogram 11)Installation - with installation - inclusive in the scope of supply 12)Warranty on Complete power genertor/DG Set - 24 month 13)Number of preventive maintenance visits offered in an year during warranty period (Supply of all consumables is the buyer's responsibilty)* - 2 14)Test report Available for (Test/approval) - Type Approval Certificate for the specified rating of the Power Generator from any of the designated agency authorized by CPCB ,COP Certificate for engine ,Type test report for Alternator as per IS:13364 (Part-1) latest / IS:13364 (Part-2) latest to prove conformity to the specifications(Including GST )

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Sub Total