Fencing/Repair/Renovation of ideal Assets of co-operative institute at Kathua.

Amount

Labour to be engaged for removal of mulba and Clearance of site before execution of work.

Dismantling doors, windows and clerestory windows of area of 3 sqm. and below(steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking incl. all leads and lifts

Demolishing brick work in cement mortar manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material ,all leads and lifts as per direction of Engineer-in-charge

Removing mortar from bricks and cleaning bricks including stacking all leads and lifts. (stacks of cleaned bricks shall be measured) from brick work in cement mortar

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth including all shapes, leads, lifts and carriage of material by MT / H.L. in cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level (By manual means) incl. all leads, lifts & carriage of material by M.T. H.L.

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand) incl. all leads, lifts & carriage of material by MT / H.L.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

50mm thick Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate 20mm nominal size) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .Water thinable Cement primer

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover

Raghunandan Dubey

ARUN SHARMA GOVT CONTRACTOR