Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAccepted-AOC CRYSTAL TOWER 4TH FLOOR TELIBANDHA RAIPUR | RAIPUR | RAIPUR | CHHATTISGARH | ₹1.2 Cr | L1 | Accepted-AOC Being L1 and Techno-commercially accepted by Tender Committee |
| Sl No | Description | Qty | Unit | LARSEN AND TOUBRO LIMITED L1 |
|---|---|---|---|---|
| 1.00Major Repairing/ Recommissioning of 10 CuM Komatsu loader WA800-3E0 Sl. No 70201, working at KOCP. (Kindly refer Scope of work for further details). Material and other items required is given below: | ||||
| 1.01 | Reinforcement of broken eye of bell crank assy. And reassembling of bell crank assembly on the WA800-3E0/70201 & 70210.(Bell crank needs to be sent to repairer's workshop) | 2 | Job | 8,20,299 ₹16,40,598 Lowest |
| 1.02 | Demounting, replacement of O-rings of all hoses of the Loader 70201 and Manpower cost to carry out the mentioned job. | 1 | Job | 2,10,000 ₹2,10,000 Lowest |
| 1.03 | Inspection of Auto Greasing System in the machine and replacement of failed/missed parts with proper bleeding and injector setting with proper looping of tubes as per recommendation on the Loader 70201. | 1 | Job | 3,41,250 ₹3,41,250 Lowest |
| 1.04 | HOSE (LIFT CYLINDER) (Part No./Equivalent- 427-62-15560I) | 4 | Nos. | 1,35,218 ₹5,40,872 Lowest |
| 1.05 | HOSE (DUMP) (Part No./Equivalent- 427-62-15730I) | 2 | Nos. | 2,51,762 ₹5,03,524 Lowest |
| 1.06 | BLOWER ASSY (Part No./Equivalent- ND116300-9740I) | 1 | Nos. | 64,787 ₹64,787 Lowest |
| 1.07 | FITTING (Part No./Equivalent- 425-32-15630I) | 1 | Nos. | 2,098 ₹2,098 Lowest |
| 1.08 | BOLT (Part No./Equivalent- 561-34-62160I) | 4 | Nos. | 5,444 ₹21,776 Lowest |
| 1.09 | WASHER (Part No./Equivalent- 561-34-62170I) | 4 | Nos. | 3,041 ₹12,164 Lowest |
Tender Value
₹1.1 Cr
EMD Value
₹1.4 L
Closing Date
9 Jun 2025, 5:00 pmClosed
Bipin Chandra Sharma/ SO(Excv.), Kusmunda Area
Office of GM(Excv)/ SO(Excv), SECL, Kusmunda Area, Korba (C.G.)- 495454
Major Repairing/ Recommissioning of 10 CuM Komatsu WA800-3E0 Payloader sl. no. 70201 and 70196 of Kusmunda OCP. Scope of work as per tender documents.
2025_SECL_335570_1
SECL/KSM/GM/EXCV/eT/2025-26/10 dt 17.05.25
Open Tender
Excavation Department Work
Item Rate
62 days
SECL Kusmunda Project Korba CG
As per Tender documents
6 documents required · 6 mandatory
₹1.4 L
26 Sept 2025
17 May 2025
10 Jun 2025
17 May 2025
9 Jun 2025
19 May 2025
17 May 2025 - 26 May 2025
Amount
Major Repairing/ Recommissioning of 10 CuM Komatsu loader WA800-3E0 Sl. No 70201, working at KOCP. (Kindly refer Scope of work for further details). Material and other items required is given below:
Reinforcement of broken eye of bell crank assy. And reassembling of bell crank assembly on the WA800-3E0/70201 & 70210.(Bell crank needs to be sent to repairer's workshop)
Demounting, replacement of O-rings of all hoses of the Loader 70201 and Manpower cost to carry out the mentioned job.
Inspection of Auto Greasing System in the machine and replacement of failed/missed parts with proper bleeding and injector setting with proper looping of tubes as per recommendation on the Loader 70201.
HOSE (LIFT CYLINDER) (Part No./Equivalent- 427-62-15560I)
HOSE (DUMP) (Part No./Equivalent- 427-62-15730I)
BLOWER ASSY (Part No./Equivalent- ND116300-9740I)
FITTING (Part No./Equivalent- 425-32-15630I)
BOLT (Part No./Equivalent- 561-34-62160I)
WASHER (Part No./Equivalent- 561-34-62170I)
HOSE (Part No./Equivalent- 427-62-25630I)
Major Repairing/Recommissioning of 10CuM Komatsu loader WA800-3E0 Sl. No 70196, working at KOCP. (Kindly refer Scope of work for further details). Material and other items required is given below:
Straightening & Bend removal of boom assy
Ultrasonic test for cross checking of internal cracks of boom assy
Building up of material at 06 no. eyes & line boring work
Bush alignment at 06 no.eyes
crack non - destructive test at welded area
Fabrication work
Fitment of boom with proper alignment & shimming
Replacing new komatsu make O- ring at all hose connections
Repair/Replacement of new fittings and new polymide hose
Repair/Replacement of new grease injectors
Repair/Replacement of grease pump seals, pressure valve & vent
Adjustment of all injector setting as per controller timing
HOSE (Part No./Equivalent- 427-62-15670I)
HOSE (Part No./Equivalent- 427-Z87-1330I)
HOSE (Part No./Equivalent- 07119-01417I)
HOSE (Part No./Equivalent- 427-62-13932I)
HOSE Part No./Equivalent- 07125-01218I)
WATER SPERATAR ASSY (Part No./Equivalent- 600-311-5210I)
CABLE (Part No./Equivalent- 427-Z89-2570I)
CABLE (Part No./Equivalent- 427-Z89-2540I)
WIRE (Part No./Equivalent- 427-06-12393I)
HOSE (Part No./Equivalent- 427-62-15661I)
HOSE (Part No./Equivalent- 07289-02622I)
HOSE (LIFT CYLINDER) (Part No./Equivalent- 427-62-15560I)
HOSE (DUMP) (Part No./Equivalent- 427-62-15730I)
HOSE (Part No./Equivalent- 427-62-24260I)
HOSE (Part No./Equivalent- 07085-010A6I)
FITTING GREASE (Part No./Equivalent- 425-32-15630I)
SPRING CYLINDER (426-32-25502I) (Part No./Equivalent- 426-32-25503I)
DUST SEAL (427-15-19140i.) (Part No./Equivalent- 427-15-59180I)
SEAL OIL (Part No./Equivalent- 427-15-19150I)
O-RING (Part No./Equivalent- 562-15-39970I)
HOLDER (Part No./Equivalent- 427-15-13270I)
HOSE (Part No./Equivalent- 07102-21212I)
HOSE (Part No./Equivalent- 427-62-25550I)
HOSE (Part No./Equivalent- 427-62-25570I)
HOSE (Part No./Equivalent- 427-62-25560I)
HOSE (Part No./Equivalent- 07296-01413I)
HOSE (Part No./Equivalent- 427-62-24230I)
HOSE (Part No./Equivalent- 02754-00209I)
RPL By (417-56-21613I.) HANDLE (Part No./Equivalent- 417-56-21612I)
COVER (Part No./Equivalent- 421-56-11860I)
COVER (Part No./Equivalent- 41F-S05-1620I)
RPL By (01010-81220I.) BOLT (Part No./Equivalent- 01011-81220I)
Total impact of GST for the purpose of CTC
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .