ADDN/ALTN TO ENTRY GATES AND APPROACH ROAD OF OMQ AREA AND SNCO,S GUEST HOUSE AND CERTAIN REVENUE WORK AT AFS KALAIKUNDA UNDER GE(AF) KALAIKUNDA

Amount

Demolition of Reinforced cement concreteof any description and in any position not otherwise specifically provided for complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sq. M each, complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as directed.

M & L Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft loose soil complete all as specfied and directed

Excavation over area n.exc 1.50 M deep for foundations and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.

Forming embankments including raising (or lowering) earth, solids,spreading in layers n exc. 30 cm thick;watering, ramming/rolling and finishing to required size, shape,etc., n exc. 1.5 m high from base,complete all as specified and directed. NOTES:- (i) Payment will be made for nett quantity after compaction with minimum proctor density 95% same shall be got tested from authosrised lab and Cost of testing shall be borne by contractor and , worked out based on initial levels and finished levels finalized jointly by the Contractor, JE and Engineer in Charge. (ii) Earth(Soil) shall be used out side of defence land and approved by GE

Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all asspecified and directed.

Removing excavated soils to a distance exceeding 250m and not exceeding 500 Metres and depositing where directed complete all asspecified and directed.

Material and Labour for, 150 mm spread thickness,soling (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber,including rolling and consolidating soling of broken boulders or quarried stone, not exc 15cm thickness with power roller exceeding 8 tonne and not exceeding 12 tonne complete all as specified and directed.

M&L for 15cm thick (compacted thickness of each layer 7.5cm thickness) WBM, with coarse aggregates Granite, trap or Basalt of grading 2 (63 to 40mm size) spread rolled and consolidated to gradient and camber with 8 to 10 ton power roller as required using aggregate of lime stone, sand stone, flint or quatzite complete all as specified and as directed.

M & L for preparing unsurfaced water bound macadam by brusing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove the loose dirt etc.complete all as specified and as directed.

M & L for applying evenly a priming / tack coat with cationic bitumen (RS - 1) @ 10 Kg per 10 Sqm over surfaces of road complete all as specified and directed.

M&L for bituminous premix asphaltic semi dense concrete 40mm consolidated thickness (minimum) with 5.5% binder content of paving bitumen Gde-VG-30 by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and pre-mixed material laid with mechanical paver, finished including rolling to required gradient and camber with 8 to 10 tonne power roller to required compaction complete all as specified in the relevant clauses of SSR Part-I (2009) and as directed. Note : (a) Rate deemed to be included for making good of any undulation/damages in wearing surfaces, where semi dense asphaltic concrete to be laid. (b) Semi dense ashphaltic bituminous concrete shall be designed as specified and binder content shall be provided as per design mix, contractor shall quote his rates considering the bitumen contents as 5.5%. Any variation in binder content on minus side shall be adjusted at the rate of Rs 50.00 per Kilogram of binder but variation on plus side shall not be paid extra contractor shall quote accordingly.

M&L for pre-mixed sand seal coat with 0.06Cum of sand mixed with 6.8Kg of paving bitumen applied and rolled 10 Sqm and rolled with 8 to 10 tonne power roller to required compaction complete.

Materials and Labour for plain cement concrete (1:3:6) Type C-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

Materials and Labour for plain cement concrete (1:4:8) Type D-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-I with using 20 mm graded aggregate as in benching, kerbs copings, edging of drain ,manhole,etc including necessary form work wherever required all complete as specified and as directed.

Materials and Labour for reinforced cement concrete 1: 1½ :3, Type A1(using 20 mm graded aggregated) in beams, cantilever, bressumers, lintels over 1.5M Span,complete all as specified and directed.

Materials and Labour for reinforced cement concrete 1: 1½ :3, Type A1(using 20 mm graded aggregated) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete ,complete all as specified and directed.

Materials and Labour for reinforced cement concrete 1: 1½ :3, Type A1(using 20 mm graded aggregated) in chajjas,complete all as specified and directed.

Materials and Labour for reinforced cement concrete 1: 1½ :3, Type A1(using 20 mm graded aggregated) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like,,complete all as specified and directed.

Materials and Labour for reinforced cement concrete 1: 1½ :3, Type A1(using 20 mm graded aggregated) in columns; pillars; piers; posts; struts etc,complete all as specified and directed.

M&L concrete bed PCC (1:3:6) type C2 to drain pipes including packing under & haunching against sides of pipe after they are laid & tested for 110mm bore pipe complete all as specified and directed

Materials and Labour Extra for forming fair finishing to surfaces channels/drain 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, etc complete all as specified and directed.

Supply only integral water proofing compound all as specified

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6), complete all as specified and directed.

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:4), complete all as specified and directed.

Materials and Labour for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM (1:6),complete all as specified and directed.

M&L Precast cement concrete 1:11/2:3, type A1 (Using 20 mm graded granite stone aggregate) in landings, slabs cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sided and soffits of plinth beams and similar works; vertical or to batter for rough finished surfaces of concrete, flat, complete all as specified and directed.

Use and waste of form work to chullah hoods, chajjas,troughs and similar items including edges for fair finished surfaces of concrete, flat, complete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings , girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete, flat, complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete, flat, complete all as specified and directed.

Supply and fix Steel windows with side hung shutters including Box/Cylindrical type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

Supply and Fix,steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm single side prelam PVC sheet with edges painted to match with prelam sheet, reinforced with MS square tube, fixed in opening, complete all as specified and directed.

Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of both sides prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.

Supply and Fix,IS markedStainless steel butt hinges, medium weight, cold rolled 100 mm size complete all as specified and directed

Supply and fix Aluminium anodized barrel tower bolts of extruded section, 200 mm long complete all as specified and directed.

Supply and Fix, extruded aluminium alloy handles, fabricated type, anodized, 150 mm size, complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Supply and fix mild steel TMT bars 6 to 8 mm dia., cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Supply and fix mild steel TMT bars 5 mm dia. and over up to and including 10 mm dia. in stirrups, spacers, binders etc. cut to length, bend to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

Supply and Fix, mild steel screw bolts (machine made), with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, diameter of shank 11 to 15 mm, length of bolt exc. 5cm long dia but n.exc 10cm, complete all as specified and directed.

Supply and Fix, mild steel screw bolts (machine made), with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, diameter of shank 11 to 15 mm, length of bolt exc. 22.5cm long dia but n.exc 30cm, complete all as specified and directed.

Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 complete all as specified and directed.

Materials and Labour for rolled mild steel , conforming to Fe 410-W (Grade E-250) quality-B, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guide for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.

Supply and Fix, Rolled Mild Steel, Fe 410 W (Grade E- 250) Quality-B, in plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachments, complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded aggregates as plinth protection including finishing surface even and smooth complete all as specified and directed.

Materials and Labour for 100 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded aggregates as floor including finishing surface even and rough complete all as specified and directed.

Materials and Labour for, Digital Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, ISO 13006, EN 14411 Grade B II, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and MAKE:- (Johnson/Kajaria or equivalent make ) directed.

Materials and Labour for, digital ceramic coloured tiles, 450 X 300 X 7 mm thick, conforming to ISO 13006, EN 14411 , Group B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match with over and including 10mm thick cement mortar (1:4) rendering complete all as specified and directed. MAKE:- Johnson/Regency/Kajaria)

Materials and Labour for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over and including 20 mm thick screed bed or bedding layer of cement mortar (1:3), complete all as specified and directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork in walls and finishing surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of concrete surfaces as in ceiling in CM(1:3) finished even and smooth (without using extra cement) complete all as specified and as directed

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on other than fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Material and Labour for applying three coats of white wash to new plastered surfaces on walls including preparation of surfaces complete all as specified and directed.

Material and Labour for applying three coats of white wash to new plastered surfaces on ceiling including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of cement-based paint, white or tinted to new plastered surfaces on walls including priming with alkali resistant priming paint and including preparation of surfaces complete all as specified and directed.

Material and Labour for preparation to new plastered surfaces on chajja,facia etc, and applying two coat of 100 % Acrylic Exterior Emulsion paint (Berger,Weather coat Advanced XP Brand/Asain Paints :Apex ultima Brand /ICI:Dulux Weather shield Max Brand/J&N:Safeguard Optima Brand painting over and including a coat of primer with one or more approved shades as per manufacturers instruction complete all as specified and directed.(Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat as directed

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

Material and Labour for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I complete, all as specified and directed.

Materials and Labour for, Ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 25 mm bore and fixed complete all as specified and directed.

Supply and Fix, in repair bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed.

Supply and Fix, stop valves, cast copper alloy , fancy type, chromium plated, screwed down, high pressure with long shank and cup (concealed type), screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix, pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore, including taking down existing unserviceable one complete all as specified and directed.

S & F flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm connected to PVC waste fittings complete all as specified and as directed.

S&F in repair vitreous chaina wash hand basin 550x400mm (flat back type) including cutting for and pinning in ends of brackets with and including half pedastal , waste fittings, CP pillar tap with capstan head, and waste water pipe complite all as specified and as directed.

Supply and Fix vitreous China wash down water closet pan (pedestal pattern), white, (including fixing bolts, flushing cistern and flush pipe connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe etc.including taking out di of existing one and making good disturbed surfaces as per existing specification complete all as specified and directed.

Supply and Fix in repair PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed.

Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight 45gms), for 32 mm bore discharge pipe,complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed.

Supply and fix PVC waste pipe 32mm/40mm dia 800mm long with suitable socket for WHB/Sink ,complete all as specified and directed.

Supply and Fix, 110 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints,laid in trenches, complete all as specified and directed.

Supply and Fix, 75 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/trench, complete all as specified and directed.

Supply and Fix, 110 mm bore PVC (SWR) bends any radius,complete all as specified and directed.

Supply and Fix, PVC (SWR) floor trap, plain with grating including jointing with solvent cement with dia. of out let 75 mm, complete all as specified and directed.

Materials and Labour for, broken stone or boulder hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface , complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for, one light point or one fan point/Exhaust Fan controlled by one switch, complete all as specified and directed.

Materials and Labour for point wiring with 4.00 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switch/socket outlet etc and including 4.00 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for one 3 pin socket outlet, 15 amps, independent,, complete all as specified and directed.

Supply and Fix, switch piano, flush button, single pole, one way, 5 Amps, complete all as specified and directed.

Supply and Fix lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings,complete all as specified and directed.

Supply and Fix, ceiling rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed.

S & F in repair single pole and neutral enclosure with two pin and earth, plug and socket , suitable for single phase 240 V,complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking capacity 10 KA, including industial plug top, complete all as specified and as directed. Make : Legrand cat part No. 607841 or equivelent in Schinder/ L&T.

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 4 way, with 200 Amps rated bus bar, Single Pole & Neutral, fixed in repairs including blanking plate , complete all as specified and directed. [Cat No. 5076 10 of Make Legrand or equivalent Model of Make L&T/ Seimens]

S & F LED bulkhead light with pressure die-cast housing light fittings nominal power 12 watt LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts. frequency of 50 Hz, lumen output of minimum 1100, lumen , , integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 3 KV, protection grade IP 65, CRI greater than 80%, ITHD below or less than 15%, CW available CCT of 6500K, power factor of minimum 0.95 polycarbonate housing with aluminium, life span of minimum 50000 working hours as per catalogue No. CENTURY - HWAR012C OR equivalent of CG/Philip/Wipro complete all as specified and as directed.

S & F LED tube light fittings(T8 TYPE) with LED tube lamp nominal power 20 Watt, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts. frequency of 50 Hz, lumen output of minimum 2100Lumen efficacy of minimum 110 lumens per watt, integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 3 KV, protection grade IP 20, CRI greater than 80%, bema angle of 1200 clear, THD below or less than 15%, CW available CCT of 6500K, power factor of minimum 0.95 polycarbonate housing with aluminium, life span of minimum 50000 working hours as per Make :- Century (Batten Cat No.KCCF0200 box type batten suitable for 18/20 watt retofit LED tube single side connection type). LED lamp : Make : Century Cat No. TWPP020C (retrofit LED tube lamp 20 Watt, Single end connection) OR CROMPTON (Batten Cat No. IGP161LT8-16 box type batten suitable for 20 watt retofit LED tube ). LED lamp : Make : Crompton Cat No. LTT8-20 LED (retrofit LED tube lamp 20 Watt with AL Heat sink),) OR equivalent of CG/Philip/Wipro complete all as specified and as directed. Note : Make of batten and LED tube lamp shall be same make.

Supply and Fixing LED lamp 7 watt with base GU - 10, CCT 2700K, 560 Lumen, with 2.5K surge protection complete all as specified and directed . Make : Century Cat Part No : LUGL007C equivalent in CG/Philip/Wipro

Supply and Fix, Heavy Duty Exhaust Fan, 300 mm sweep, 1400 RPM, Single Phase, 230 V, 50 Hz, all as per Model “Turbo Force” of Make ‘Havells’ or equivalent Model of Make ‘Usha’ / ’Crompton Greaves’/’Almonard’ and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 2.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan complete all as specified and directed.

S & F MCB SPN 6-32 Amp , AC , 220 Volt , breaking capacity 10 kA , C-curve , ISI marked, as per IS 60898-1 2002 complete all as specified & directed.

S & F MCB SP 6-32 Amp , AC , 220 Volt , breaking capacity 10 kA , C-curve , ISI marked, as per IS 60898-1 2002 complete all as specified & directed.

SUMAN CONSTRUCTION