Providing electrical wiring and associated works at Qtr No.4 (Type IV), Pusa Road, MTNL, New Delhi.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable sixe MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ PVC trunking as required. A) 3x1.5 sqmm

b) 3x4 sqmm

c) 3x6 sqmm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. A) 20 mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. A) 75 MM x 75 mm x 60 mm deep

b) 180 mm x 100 mm x 60 mm deep

c) 200 mm x 125 mm x 60 mm deep

d) 250 mm x 300 mm x 60 mm deep

Supplying and fixing following piano type switch/ socket on the existing switch box / cover including connections etc. as required (Make: Anchor/ Cona/ Kinjal/ SS) a) 5/6 amp switch

b) 15/16 amp switch

c) 3 pin 5/6 amp socket outlet

d) 6 pin 15/16 amp socket outlet

e) Hylam Sheet

Supplying and fixing single/two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (Make: Anchor/ Cona/SS)

S/F 300 mm 230 Volts single phase 230 volts heavy duty exhaust fan with louver in existing opening as reqd. (M/s Crompton/ Bajaj/ Usha/ Khaitan make)

S/F SPN MCB DB with one on 25/32 amps SPN MCB on wall earthing the body i/c connection as reqd (M/s MDS/ L&T/ ABB/ SS make)

S/F 4 feet LED batten fitting with integral electronic driver and LED tube operated on 230 V 50 Hz AC supply on surface with mounting arrangement connections etc complete as reqd (System wattage 20-22 W system, lumen output 1850-2000 lumens etc.) Make: Philips/ Osram/ Havells

S/F fancy type LED fitting on wall / surface etc as reqd.

Supplying and fixing single phase 230 volts 50 Hz AC supply 1200 mm sweep ceiling fan with all accessories a reqd. (M/s Usha/ Cromption/ Bajaj/ Make)

Providing and fixing call bell on wall/ surface etc as reqd.

Providing 7W/9W LED bulb on existing fitting etc as reqd. Make: M/s Philips/ Surya/ Havells/ Cromption/ Osram/ SS

S/F 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc as required.

Supplying and fixing following way single pole and neutral sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, power painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) a) 16 way (M/s MDS/L&T/ABB/Havells/C&S make)

Supplying and fixing following rating, double pole, 240 V isolator in existing MCB DB complete with connections, testing and commissioning etc. as required. A) 63 Amp (M/s MDS/L&T/ABB/Havells/C&S make)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required. (M/s MDS/L&T/ABB/Havells/C&S make)

Supply & installing of electric hot water geyser capacity 25 Lts, 230 Volt, 50 Hz AC, i/p 2000 W including thermostat auto thermal trip on the wall with the help of clamp, screws, fasteners providing PVC flexible pipe water connections, electrical connections earthing the body etc as reqd. (Make: Crompton greaves, Racold, Havells, Bajaj, Orient with ISI mark)

Less credit for dismantled material (Dismantling of old fitting, conduits, ceiling fans of required areas, wires etc at different area as per the instructions of engineer in charge etc as reqd.

Tiwari Electric Company