Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.8 LAccepted-AOC CIVIL LINE MATATILA ROAD TALBEHAT DISTT LALITPUR U P | TALBEHAT | LALITPUR | U P | 1 | Accepted-AOC LOWEST BIDDER | |
| 2 | 2₹9.1 L+₹7,705 (0.85%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹10.0 L
EMD Value
₹10.0 Cr
Closing Date
19 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AJAY KUMAR SINGH
LAKE VIEW CAMP MILITARY STATION TALBEHAT, PIN-284125
REPAIR/MAINT OF JOINERY WORKS IN ZONE 11 AND 10 AT MIL STN TALBEHAT
2023_MES_627485_1
AGE(I)/TBT/TOK-62/2023-24
Open Tender
Civil Works
Item Rate
180 days
TALBEHAT MIL STN
7 documents required · 7 mandatory
₹500
Yes
AGE I TALBEHAT
₹10.0 Cr
Yes
4 Jan 2024
9 Nov 2023
21 Dec 2023
16 Nov 2023
19 Dec 2023
23 Nov 2023
Amount
Taking down chowkats or frames exc. 1.5 but n.exc 4sqm each with shutters (W/o taking off shutters from the frame) and removal to store complete all as specified and as directed
-Ditto- but n.exc 1.5m2 each -ditto-.
Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each complete all as specified and as directed
Taking down shutters of any description n exc. 1 Sqm each and -Ditto-
S&F IInd class hard wood (solid) plain.solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered but together with glue, pinned at joints complete all as specified and as directed
S & F pressed steel frame size 105x60mm for door with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed
S & F pressed steel frame size 165x60mm for door with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed
S&F M.S work as in holdfasts., wind ties , plane angle cleats for securing purlins to wooden trusses or rafters etc. complete all as specified and as directed
M & L cement concrete type B-0 1:2:4 (12.5 mm graded agg ) as in bed block ,Filling of holes, coping & filling to PS Frame etc complete all as specified and as directed
S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed
S&F II nd class HW, 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed
S&F 35mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each ®
S&F powder coated anodized aluminium frames for door, window , ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed by Engr-in-charge
S&F Powder coated anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminium snap beading screws etc complete all as specified.
S&F Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified
S&F powder coated aluminium anodized side hung type window/ventilators shutter without sash bars section weight not less than 0.55Kg/RM with extruded built up standard tubular and other sections of approved make according to IS(thickness of powder coating not less than 50micron including necessay glazing clips weight not less than 0.124Kg/Rm for fixing sheet glass anodized aluminium fittings/fixtures such as required number of roller of suitable size interlocking cleats/ plates etc as required for complete fixing window shutters complete all as specified and as directed by Engr-in-charge. Note:- Only aluminium shutters for the window shall be measured in sqm sheet glass and wiremesh etc shall be measured and paid in respective items
M&L powder coated aluminium window shutter sliding type section not less than 0.55 Kg/RM, three shutter two glazed and one gauged including joining cleat,glazing cleap,rubber packing aluminium snap beading,screws,locking arrangement complete all as specified and as directed by Engr-in-charge.(Measurement shall be done leaf basis) Note:- Glass and Wiremesh paid Seprately.
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F in position 4.8 to 5mm thick clear float glass of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame exc 0.5 sqm in each pane complete all as specified and as directed.
S&F in position 4.8 to 5mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium framen n. exc 0.5 sqm in each pane all as specified and as directed.
M&L for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors,ladders; framed baluster,railings and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed
S&F solid PVC door frame of size 50x47 mm made out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
M & L for rolled mild steel work angle iron as in door frame & cooler stand frame confirming to Fe-290 or Fe-165 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.
Dismantling board any description, fixed in any position with nails complete all as directed
S & F in repairs 18 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent.
S & F in repairs 18 mm thick Celuka ply / PVC of grade 1 quality of one side prelaminated and other side plain white or colour to make kitchen cabinet/ drawer shutters complete as per specifications and as directed by the engineer - in - charge.Make:-Rajshri or equivalent
S & F in repairs 12 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent.
S & F in repairs 6 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent.
S & F auto closing hinges 35 mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed Make:- KAFF or equivalent
S & F Ball bearing runners 45 mm (length 20" to 25") Telescopic , full extension load capacity 50 kgscomplete all as specified and as directed Make:- KAFF or equivalent
S & F stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and as directed.
S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795 x 500 x 150 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (Thali basket) pull out type, size 530 x 500 x 200 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 x 200 mm with necessary sliding frame structure, fixing clips etc complete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed by Engineer-in-charge.
S&F for 125mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed
S&F continuous (piano) hinges mild steel bright finishor electro galvanised of 30mm width of flaps (when open) complete all as spd & directed.
M&L for preparing the new wooden surface & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer over 10Cm width or girth complete all as spd & directed.
M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
S & F Stailess steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and directed.
Taking out old unserviceable steel wire cloth & S & F Stailess steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and directed
Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.
S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door.
S&F in repair 300mm mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F aluminum alloy anodised butt hinges, ISI marked of size 100 mm, complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel ISI marked size 100 mm size complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel ISI marked size 125 mm size complete all as specified and directed.
S&F 150mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed
S&F 125mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed
S & F in repairs aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.
S & F in repairs aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.
S & F 250mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S & F in repair 250mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
Repair to Aluminum window / door including necessary welding, reivting, easing drilling taking down replacement of unserviceable hanging & all necessary devices/fitting making them in serviceable condition and refixing in same opening complete all as specified and directed.
Repair to wooden window,Door including necessary reivting, easing drilling and replacement of unserviceable hanging device, & all necessary fitting and makiing them in serviceable condition complete all as specified and directed.
Repair to steel window including necessary welding, reivting, easing drilling and replacement of unserviceable hanging device & all necessary fitting makiing them in serviceable condition complete all as specified and directed.
M&L for preparation of old painted steel surface of any description and applying one coat of synthetic enamelled paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted wooden surface of any description and applying one coat of synthetic enamelled complete all as specified and as directed.
Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 10mm thick on in CM 1:6 fair faces of brick work or concrete surfacesfair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed
M&L for preparing of surfaces of walls, pillasters, cornices etc by washing, rubbing down & stopping etc and applying one coat of oil bound distemper in any colour complete all as specified and directed.
M & L for 20mm thick granite on kitchen platform and similar work, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.
Moulding as In edge of granite platform complete all as specified & directed.
Cutting holes into or through brick wall built in cement lime mortar and walls of cement concrete of superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed
S&F in repair Stainless steel 20mm dia curtain rod including fixing brackets complete all as specified and directed.
S&F Stainless steel knobs with bracket fixing at end of pelmet rod complete al as spd & directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed.
M & L for Non-skid coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.
All as the item above but as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified.
Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)
M/s Indu Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .