Engineering, Supply, Erection and Commissioning of 01 No. 132kV GIS Feeder Bay at Existing 220kV GIS Substation Jewar, Noida on Turnkey Basis

Total Price for Supply of Equipments and Material Q -1

Total Price for Handling, Erection, Testing & Commissioning Charges Q -2

Total Price for Electrical works

% Discount, if any on Electrical works

Discount in Rs. on Electrical works

NET Price for Electrical works

Price for Civil Works (Q3)

% Discount , if any on civil works

Discount in Rs. on civil works

NET Price for Civil works

Net Lum Sum Bid Price (Elect+Civil) after Discount

Place :

Designation: ………………………………………………………………………..

Name of Bidder:

SCHEDULE- 1

Schedule for Supply of Equipments for for additional 01 Nos. 132 KV Line Feeder Bay at 220 KV GIS Sub Station Jewar, Noida alongwith integration with existing GIS(Q1)

145KV GIS Equipments

Feeder Bay Module: 145KV, 1600A, 40KA for 3 sec SF6 gas insulated feeder bay module each comprising of SF6 gas insulated circuit breaker (1600A), current transformer (1000-800-500-300/1-1-1-1-1A), PT, 120kV LA having two bus-bar disconnectors (1600A) with common grounding switch, line disconnector with safety grounding switches suitable for Main-I & Main-II bus system, Local Control Cubicle, SF6 gas monitoring system for complete bay. Three 1–phase SF6 gas insulated terminal connection for connecting 3 nos of single phase incoming XLPE cable 1000sqmm with cable termination enclosure, Local Control Cubicle and accessories with GIS etc. to complete feeder bay module as per technical specification.

Bus Bar Extension for connecting with existing bus bar : 145kV, 3 single phase (isolated) units, SF6 gas insulated, metal enclosed 2000A bus bars each enclosed in bus enclosures running along the length of the switchgear to interconnect each of circuit breaker bay module. As per Technical Specification.

220KV Equipments

Simplex control & protction panel as per technical specification of SAS for 220KV feeder

Energy Meters

0.2s accuracy class ABT Energy Meters module as per technical specification.

Metering cubicle for ABT energy meters

Cable termination kits

132KV, 1000 mm2, XLPE Power Cable indoor termination kit (GIS END )

Earthing

50x6mm MS Flat

75x12mm Copper Flat

50x6mm Copper Flat

Armoured Aluminium Power Cables

Armoured Copper Control Cables

Total

Seal of Company

Designation ……………………………………………………………….

Full Signature …………………………………………………………….

Designation ……………………………………………………………….

Name of Bidder:

SCHEDULE- 2

Schedule for Installation of Equipments for additional 01 Nos. 132 KV Line Feeder Bay at 220 KV GIS Sub Station Jewar, Noida alongwith integration with existing GIS(Q2)

145KV GIS Equipments

Feeder Bay Module: 145KV, 1600A, 40KA for 3 sec SF6 gas insulated feeder bay module each comprising of SF6 gas insulated circuit breaker (1600A), current transformer (1000-800-500-300/1-1-1-1-1A), PT, 120kV LA having two bus-bar disconnectors (1600A) with common grounding switch, line disconnector with safety grounding switches suitable for Main-I & Main-II bus system, Local Control Cubicle, SF6 gas monitoring system for complete bay. Three 1–phase SF6 gas insulated terminal connection for connecting 3 nos of single phase incoming XLPE cable 1000sqmm with cable termination enclosure, Local Control Cubicle and accessories with GIS etc. to complete feeder bay module as per technical specification.

Bus Bar Extension for connecting with existing bus bar : 145kV, 3 single phase (isolated) units, SF6 gas insulated, metal enclosed 2000A bus bars each enclosed in bus enclosures running along the length of the switchgear to interconnect each of circuit breaker bay module. As per Technical Specification.

220KV Equipments

Simplex control & protction panel as per technical specification of SAS for 220KV feeder

Energy Meters

0.2s accuracy class ABT Energy Meters module as per technical specification.

Metering cubicle for ABT energy meters

Cable termination kits

132KV, 1000 mm2, XLPE Power Cable indoor termination kit (GIS END )

Earthing

50x6mm MS Flat

75x10mm Copper Flat

50x6mm Copper Flat

Armoured Aluminium Power Cables

Armoured Copper Control Cables

Total

Seal of Company

Designation ……………………………………………………………….

Full Signature …………………………………………………………….

Designation ……………………………………………………………….

BILL OF QUANTITY

Total Rs.

Special Conditions

Tenderers are advised to visit the site of work and make themselves acquainted with the site conditions. No claim whatsoever shall be entertained after submission of tender.

Tenderer shall quote rates inclusive of all type of taxes. Only GST will be paid extra .

No idling charge of T&P and labour will be paid for extended period of contract , if any .

Quantities are approximate and may vary upto any extent on either side as per requirement of the site conditions or may not be executed at all for which no extra claim shall be entertained.

All above works shall be executed as per U.P.P.W.D/ U.P.P.T.C.L specification or as directed by Engineer-In-charge.

The Work may be carried on newly allotted land and energized S/S Area having high voltage installations. contractor must employee trained supervisor and labour to work in such electrical hazardous area. Safety of all men & material shall be contractor's responsibility.

Income tax / other tax if any levied by government during contractual period as required shall be deducted by the deptt, form the contractor's bill. However GST shall be paid extra as legally applicable.

Contractor shall register the agreement and the labour engaged in construction work in the office of Dy. Labour Commissioner

Testing of material shall be born by the contractor. Nothing shall be paid extra by the department.

The contractor should have all relative T&P as concrete mixture, needle vibrator, surface vibrator, slump test equipment & mini earth compactor.

Contractor has to make platform for casting of trench covers as per the direction of Engineer-in-Charge. Nothing shall be paid extra for it.

Contractor has to put up all relevant drawing with design/layout to SE (Civil) Noida for approval at his own cost if requared; nothing shall be paid extra for it.

Contractor has to made available 12 No. Cube at site and will frequently fill the cibe at site . Accordingly cube test report will be submitted by contractor at his own cost . Final bill of work will be paid to contractor only after he submitts all satisfactory test result from authorised lab .

BILL OF QUANTITY CIVIL WORKS FOR CONSTRUCTION OF 01 NO.132 KV GIS BAY AT 220/132/33 KV SUBSTATION JEWAR (GAUTAMBUDHNAGAR)

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)2

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

Total

Special Conditions : -

1. Tenderers are advised to visit the site of work and make themselves acquainted with the site conditions. No claim whatsoever shall be entertained after submission of tender . 2. Tenderer shall quote rates inclusive of all type of taxes (Income Tax, Labour cess, Royalty, No entry zone fees etc.) only GST shall be paid extra. 3. No idling charges shall be paid for contractual period as well as extended period. 4. Rates quoted by Tender will remain firm till completion of scope of work of contract, is any item of work required to complete the scope of work shall be deemed included in the scope of work and rates, if not available in the bill of quantity shall be finalized by SE, ECTC, Noida as per relevant clause. 5. Quantities are approximate and may vary up to any extent on either side as per requirement of the site conditions or may not be executed at all for which no extra claim shall be entertained. 6. All the above work shall be executed as per U.P.P.W.D., U.P.P.T.C.L. specifications or as directed by Engineer- in –charge. 7. The work may be carried in energized S/s area having high voltage installations contractor must employ trained supervisor and labour to work in such electrical hazardous area . All risk to men and material shall be contractor’s responsibility. Insurance of labour & T&P shall be borne by the agency. 8. Contractor shall register his labour engaged in construction work in the office of Dy. Labour Commissioner Only registered Labour in Labour Commissioner office shall be employed. If any labour not registered then it will be registered within 24 hours.

9. MS scrap received against dismantled RCC/RB work will be issued to the contractor@ 30.00/Kg. 10. In dismantling of brick work, 60% bricks, 28% brick bats and 12% debris will be treated as recovered. Bricks shall be issued to contractor @3100/per thousand and Brick Bats @1050/Cum and debris at free of cost. 11. Post concrete testing shall be carried out by department on completion of the work by IIT/ HBTI/ NABL approved laboratory. Final bill shall be prepared, if and only if results will found as per IS standard and all expenditure is the responsibility of the firm. If results are not satisfactory then agency will be recommended for black list and work is dismantled and reconstructed on the expenditure of the firm/ contractor. 12. Contractor has to put up all relevant drawing to SE (Civil) Noida for approval at his own cost the drawing shall be vetted by IIT/Engineering collage nothing shall be paid extra for it. 13. As per G.O. no.622/23-12-2012-2 Audit/08 TC date 08.06.2012, Contractor has to deposit extra security performance guarantee, If the tendered rate are found below to the department rates. 14. As per section 171of CGST Act, 2017 any reduction in rates of Tax of any supply of the goods are service of the benefit of input tax credit shall be passed on to the recipient by the way of commensurate reduction in prices. Hence supplier/Manufacturer to ensure to pass the benefit reduced prices to UPPTCL. Further price quoted by supplier/manufacturer is subject to security under above section 15. A security of 10% of the agreement shall be deducted from running bill of agency. Which shall be released after six months of successful completion of work. 16. The agency shall deposit the proof of GST payment, if not, then their next payment cannot be released by corporation. 17. Receipt for royalty payments for coarse sand and, 20 mm stone blast, earth etc. shall be deposited by agency with each bill, in absence of this, royalty shall be deducted from their bill with penalty, if any. 18. No labour will stay in substation area. 19. All Labour with valid Aadhar card will enter through gate pass in 400/220/132kv sub-station and will leave the sight neat & clean condition in afternoon. No night shift shall be allowed due to hazardous condition.. 20. A COVID help desk shall be maintained by the agency during currency of contract with Mask, Sanitizer, Reporting Register and Thermal Scanner, if disposable Mask is used then it shall be disposed of as per Govt. of India guidelines as time to time . 21. The labours working in the energize switch yard will use Gum Boots , Insulating Gloves, Helmet etc. labours if proper safety measures not followed then the firm will be panelized.

22. If any honey combing appeared in surface then all the grits shall be removed by pointed hammer till the good surface then "Patch fix Concrete" (Make Bostik) shall be used for filling 180 mm depth, for extra deep portion "Patch Fix Concrete" shall be used in layers having depth up to 180mm. 23. Electricity shall be available on payment basis and agency will take the temporary connection from uppcl 24. Water shall be available at one point only and as per time schedule of transmission and firm shall have his own arrangement for storage by tank or any other means. Water charges shall be deducted in any condition. 25. Supply of anchor bolt the factory inspection shall be arrange by the contractor on his own cost & testing of anchor bolt shall be done by IIT/NABL approved laboratory. 26. .Covid-19 Guideline issued by Gov of India shall be applied & binding to the firm. 27. Material for testing like concrete cube, steel, coarse sand, coarse aggregate etc. has to be carried out by the contractor to the division lab at his own cost. 28. Testing of material from NABL approved lab, if required shall be borne by the contractor. Nothing shall be paid extra by the department. 29. Contractor has to made available 6 No. cube at site and will frequently fill the cube at site. Accordingly cube test report will be submitted by contractor at his own cost. Final bill of work will be paid to contractor only after he will submit all satisfactory test result from authorized lab. 30. Site shall be handed over to agency as and where basis no extra claim shall be paid to the contractor for clearing, leveling, dressing etc. 31. Curing of cement work shall be done as per prevailing IS code and if found faulty post concrete testing from IIT shall be done on the cost of firm. 32. The work shall be carried out in energized 220 KV G.I.S. building where opening for two No. 220 KV GIS Module installation shall be done. It is responsibility of firm to take all precautions, so that existing 220 KV G.I.S. module or G.I.S. building will be safe in all respect. Before opening of cut out for new G.I.S. module firm will ensure all safety precautions. The design, drawing and cut out opening procedure shall be submitted to SE, ECTC Jhansi for his approval.