(PART-A) 1000 GPM pump, Make - kirloskar oil engines Itd. from one place to other place within 30 meters radius with 6 inch dia. 24 mtrs. welding near delivery side of pump, due to decreased water level at CS-34 sump and new pipes of 6 inch dia. 70 m

Amount

PART - A (Pump Shifting Work) Welding of Delivery Pipe as per requirement :- Welding of 6" dia pipe to pipe for jointing by gas/electric welding M/C, 24 Mtr (4X51.75X3 = 621 Cm) for jointing of pipe.

Making bend delivery side 6" dia pipe line cutting of pipe 2X51.75 = 103.5 Cm. Jointing by welding and bending pipe 2X51.75X3 = 310.5 Cm. Total = 414 Cm.

Cleaning of sump Cleaning of sump to make it suitable for suction of mud free waterExcavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 3 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. All kinds of soil. (4m X 3m X 3m)= 36 cum x2=72 cum

Dismantling and Fixing of pump water engine Loading unloading, dismantalling and fixing of 1000 Gpm pump from one place to another with in range of 5 km

Making Base for pump By Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Hard rock.(3m X 3m X 2m)= 18 cum x 2=36 cum

Laying of pipe above ground 6" dia. 70 mtrs. MS Pipe (21.2kg/m X 70 mtrs. = 1484 kg)

Welding of 6" dia pipe to pipe for jointing by gas/electric welding M/C, 70Mtr (12X51.75X3 = 1863 Cm) for jointing of pipe

Providing of 6" Carbon steel forged blind flange

Fixing 6" DIA Flange. (2X51.75X3 = 310.5 Cm.) welding.

Providing and fixing bolts including nuts and washers complete.

PART - B (Making of Filling Point :-welding of 6" dia. pipe to pipe for jointing by gas/electric welding M/C, 260 Mtr (44X51.75X3 = 6831 Cm)

Making bend 6" dia. pipe line cutting of pipe 6X51.75 = 310.5 Cm. Jointing by welding and bending pipe 6X51.75X3 = 931.5 Cm. Total = 931.5 Cm.

Providing 6" Carbon Steel Forged Blind flange

Providing and fixing bolts including nuts and washers complete.

Laying of pipe above ground 6" dia. 260 mtrs. MS Pipe (21.2kg/m X 260 mtrs.)

Labour charge(4daysX6)= 24

Welder

Supervisor

Total impact of GST for the purpose of CTC

M/S AKASH KUMAR NONIA (BID ID -1165379)