GEMC-511687723678199
Awarded to OM HARDWARE AND ELECTRICALS
₹4.4 L
Products
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| Try square | VISCO / TS150 | 8203 | 25 nos | 240 | 6,000 |
| spanner adjustable 150mm | TAPARIA / 1170-6 | 8204 | 2 nos | 199 | 398 |
| Snip sheet metal straight nose 200mm | TAPARIA / ATS10 | 8203 | 12 nos | 615 | 7,380 |
| Outside Micrometer 0-25mm | MITUTAIO / MITU | 9030 | 2 nos. | 4,550 | 9,100 |
| Pliers flat nose | TAPARIA / 1421-6 | 8203 | 24 nos | 240 | 5,760 |
| Wattmeter multi-range up | YOKINS | 9030 | 1 no | 5,600 | 5,600 |
| File flat rough double cut | TAPARIA / HF2002 | 8203 | 25 nos | 265 | 6,625 |
| Screw driver, plastic handle,Flat tip | TAPARIA / 902 | 8205 | 3 nos each | 44 | 132 |
| Divider spring joint | NA | 8203 | 33 nos | 430 | 14,190 |
| Spanner double ended 19mm to31.8mm | TAPARIA / DEP12 | 8204 | 3 set | 750 | 2,250 |
| Snip sheet metal curved nose | TAPARIA / ATL10 | 8203 | 12 nos | 615 | 7,380 |
| Rubber Mat for Electrical work | NA | 8203 | 2 nos. | 360 | 720 |
| Line tester | TAPARIA / 814 | 8205 | 46 nos | 46 | 2,116 |
| Vernier caliper 250mm | INSIZE | 9030 | 2 nos. | 2,050 | 4,100 |
| File, half round, fine double cut | TAPARIA / 3HR1502 | 8203 | 25 nos | 289 | 7,225 |
| Tong tester (clamp on multimeter) | NA | 9030 | 5 nos | 950 | 4,750 |
| Wooden mallet | NA | 4421 | 5 nos | 750 | 3,750 |
| Measuring steel tape | VENUS / VENUS 5 | 9017 | 21 nos | 145 | 3,045 |
| Caliper spring joint in side 150mm | INSIZE / 150 | 8203 | 33 nos | 680 | 22,440 |
| Pipe wrench | TAPARIA / 1277 | 8204 | 4 nos | 3,190 | 12,760 |
| Feeler gauge | STANLEY | 8204 | 4 set | 940 | 3,760 |
| Vernier caliper 150mm | INSIZE | 9030 | 4 nos. | 1,520 | 6,080 |
| File, round, fine double cut | TAPARIA / RD1502 | 8203 | 25 nos | 255 | 6,375 |
| Pipe cutter miniature for copper tube 3mm to 16mm | NA | 8204 | 5 nos | 3,060 | 15,300 |
| Torque wrench | TAPARIA / TW50 | 8204 | 1 each | 4,820 | 4,820 |
| Neon Tester 500v | TAPARIA / 813 | 8205 | 21 nos | 54 | 1,134 |
| Caliper outside spring type | INSIZE / 150 | 8203 | 21 nos | 450 | 9,450 |
| Hand blower portable complete | BOSCH / 82-270 | 8467 | 1 no | 4,120 | 4,120 |
| File flat, fine double cut | TAPARIA / RFL1502 | 8203 | 25 nos | 225 | 5,625 |
| Ratchet spanner | TAPARIA / 1715 | 8204 | 1 no | 740 | 740 |
| Tweezers | NA | 8204 | 25 nos | 70 | 1,750 |
| Tachometer digital, multi range | NA | 9030 | 1 nos. | 11,300 | 11,300 |
| Lapping plate | NA | 8455 | 2 nos | 4,300 | 8,600 |
| Caliper, odd leg, spring joint | INSIZE / 150 | 8203 | 46 nos | 680 | 31,280 |
| Spirit level precision metallic | RSKJAPAN / RSK 200 | 8467 | 1 no | 19,600 | 19,600 |
| File square, fine double cut | TAPARIA / SQ1502 | 8203 | 25 nos | 265 | 6,625 |
| Piercing pliers & reversing valvewith access fitting 6-18mm | NA | 8203 | 5 nos | 1,980 | 9,900 |
| Hammer cross peen with Handle 250gms | TAPARIA / WH200C | 8205 | 21 nos | 275 | 5,775 |
| Drill gauges | NA | 8204 | 2 nos | 670 | 1,340 |
| Cold Chisel flat | TAPARIA / 1046 | 8205 | 46 nos | 127 | 5,842 |
| Tap set with matching drills | BOSCH / 13 RE | 8467 | 2 nos | 4,500 | 9,000 |
| Dot punch 100mm | TAPARIA / 1984 | 8203 | 21 nos | 64 | 1,344 |
| Spanner double ended 4.7mm to 16mm | TAPARIA / DEP 10 | 8204 | 5 sets | 840 | 4,200 |
| Hammer ball pane with handle 220gms | TAPARIA / WH200B | 8205 | 46 nos. | 218 | 10,028 |
| Dowel pin (Straight) | NAN / NA | 8203 | 1 each | 980 | 980 |
| File flat smooth | TAPARIA / HF2503 | 8203 | 21 nos | 345 | 7,245 |
| cold chisel cross cut | TAPARIA / 1059 | 8205 | 25 nos | 195 | 4,875 |
| Welding table for gas/Arc | NA | 8203 | 1 no | 24,500 | 24,500 |
| Round Punch 3mm | NA | 8203 | 5 nos | 150 | 750 |
| Hammer ball pane with handle 450gms | TAPARIA / WH500B | 8205 | 25 nos | 323 | 8,075 |
| Portable Electric Hand drill | BOSCH / 501 | 8467 | 1 no. | 2,260 | 2,260 |
| File triangular fine double cut | TAPARIA / 3SQ1502 | 8203 | 25 nos | 275 | 6,875 |
| Ring spanner off set | TAPARIA / 1810 | 8204 | 1 set | 1,820 | 1,820 |
| Voltmeter, AC/DC portable precision grade Digital Panel board type | NA | 9030 | 5 nos | 2,260 | 11,300 |
| Philips screw driver | TAPARIA / 812 | 8205 | 5 nos | 290 | 1,450 |
| Tape measuring 10m | FREEMANS / 10M | 9017 | 24 nos | 195 | 4,680 |
| Hacksaw frame fixed type | DE NEERS / 12-300 | 8205 | 21 nos | 245 | 5,145 |
| Wire cutter and stripper 150mm | TAPARIA / WS 05 | 8203 | 21 nos. | 57 | 1,197 |
| Centre punch | TAPARIA / 1985 | 8203 | 33 nos | 57 | 1,881 |
| Pipe cutter with built in reamer and space cutter, for copper tube | NA | 8204 | 5 nos | 1,720 | 8,600 |
| Heavy Duty Screw Driver Insulated | TAPARIA / 937I | 8205 | 21 nos | 68 | 1,428 |
| Pliers combination insulated | TAPARIA / 1621-8 | 8203 | 19 nos | 238 | 4,522 |
| Ammeter, AC/DC portable precision grade Digital Panel board type 0-30amp | NA | 9030 | 5 nos | 2,750 | 13,750 |
| Hack saw tubular metal frame adjustable | NA | 8205 | 12 nos | 345 | 4,140 |
| Oil can | TAPARIA / OC | 8413 | 8 nos. | 100 | 800 |
| Screw driver, flat type | TAPARIA / 842 | 8205 | 21 nos | 42 | 882 |
| spanner adjustable drop forged,SS 300mm | TAPARIA / 1173-10 | 8204 | 2 nos | 520 | 1,040 |
| Megger 1000v | HTC / HTS | 9030 | 5 nos | 2,500 | 12,500 |
| Pliers long nose | TAPARIA / 1420-8 | 8203 | 8 nos | 270 | 2,160 |
| Screw Driver Insulated 150mm | TAPARIA / 824I | 8205 | 12 nos | 67 | 804 |