Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L1 | Accepted-AOC Being lowest L1 | |
| 2 | L2₹17.7 L+₹78,461 (4.63%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹18.5 L+₹1.6 L (9.31%)Rejected-Finance 2 16 AJEET GANJ II BABUPURWA KANPUR KANPUR NAGAR UTTAR PRADESH 208011 | KANPUR NAGAR | UTTAR PRADESH | 208011 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹19.5 L+₹2.5 L (14.9%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹19.8 L+₹2.9 L (16.9%)Rejected-Finance FRIENDS COLONY STREET A DHANGU ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹16 L
EMD Value
₹32,000
Closing Date
1 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Pathankot
GE (AF) Pathankot
ADDN/ALTN TO BLDG NO. T-165 (SATLUJ) AT AIR FORCE STATION PATHANKOT
2023_MES_633856_3
8422/GE/PAF-62/2023-24
Open Tender
Civil Works
Item Rate
90 days
GE (AF) Pathankot
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Pathankot
₹32,000
Yes
1 Apr 2024
18 Jan 2024
3 Feb 2024
18 Jan 2024
1 Feb 2024
18 Jan 2024
Amount
Taking down cement plaster on brick or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-charge.
Material and Labour for complete removal of existing treatment (including wall. papers or any other similar treatment ) from walls complete all as specified and directed by Engineer-in-charge.
Material and Labour 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
Material and Labour 15 mm thick rendering in two layers (5 mm thick in CM 1:4 over 10 mm thick in cement mortar 1:6) mixing with WPC on top layer @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. (WPC shall be measured and paid separately).
Supply only liquid water proofing compound complete all as specified and directed by Engineer-in-charge.
Material and Labour for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, incl roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of surfaces of wall and applying 3mm thick wall care putty and making the surface perfectly smooth using necessary tools etc complete all as specified and directed by Engineer-in-charge.
Material and Labour for applying two coats of plastic emulsion paint on surfaces of wall using auto paint roller complete all as specified and directed by Engineer-in-charge.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge.
Material and Labour for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.06 sqm and n. exc. 0.38 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and incl screed bed or bedding layers of mortars 15 mm thick in CM 1:6 of pattern and shade as approved by GE for laying floor finishes complete all as specified and directed by Engineer-in-charge.
Material and Labour for vitrified glossy bathroom wall tiles of size 600mm x 1200mm in different colour combination or any shade as approved by GE, on vertical surfaces such as skirting, dados etc set and jointed using proper adhesive chemical mixture and proper levelling incl cutting for sanitary fittings complete all as specified and directed by Engineer-in-charge.
Material and Labour for glazed ceramic coloured in different colour combination as approved by GE ,450x350x7mm thick on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl rendering 10mm thick in CM (1:4) on brick or concrete surface complete all as specified and directed by Engineer-in-charge.
Material and Labour 75 mm thick P.C.C 1:4:8 type D2 (using 40 mm graded aggregate) as in sub base of flooring complete all as specified and directed by Engineer-in-charge.
Material and Labour for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in benching, coping & hanuching etc complete all as specified and directed by Engineer-in-charge.
Material and Labour for non skid heavy duty designer coloured tiles as in floor for parking or other open area like flag post etc of 10 to 12 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc of pattern as approved by GE, set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and incl screed bed or bedding layers of mortars 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-charge.
Material and Labour Marble work like Udaipur green 16mm to 18mm thick (table rubbed and polished)as in cooking plateforms, treads, riser or landing of stair hall, window cill of floors and like over cement mortar (1:4) screed bed 20mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black incl cutting of 25 mm dia hole for gas pipe and incl rounding to edges incl taking down existing stone slab and similar complete all as specified and directed by Engineer-in-charge.
Material and Labour Granite work 16mm to 18mm thick (table rubbed and polished)as in platforms, counter for Wash hand basin, treads, riser or landing of stair hall, window cill of floors and like over cement mortar (1:4) screed bed 20mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black incl cutting of 25 mm dia hole for gas pipe and incl rounding to edges incl taking down existing stone slab and similar complete all as specified and directed by Engineer-in-charge.
Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection 75mm thick finished even and fair incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed by Engineer-in-charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 Sqm each and removing from site complete all as specified and directed by Engineer-in-charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc. 4.00 Sqm each and removing from site complete all as specified and directed by Engineer-in-charge.
Supply and Fixing factory made single extruded WPC solid UV printed decorative type flush door shutters of size 30mm thick comprising of virgin polymer of K value 58-60 ( suspension grade), calcium carbonate and natural fibres ( wood powder/rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N ( face) & 900N ( edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardnat . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary fulll body threaded star headed counter sunk SS screws , complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 300mm long Stainless steel sliding door bolt with hasp and staple ( bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts and fixed complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for Stainless steel Butt hinges,exc 125 mm long, ISI marked complete all as specified and directed by Engineer-in-charge.
Supply and Fixing stainless steel tower bolt 150 mm size complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 150 mm long stainless steel handels complete all as specified and directed by Engineer-in-charge.
Supply and Fixing heavy duty stainless steel magnetic door stopper 4 inches long complete all as specified and directed by Engineer-in-charge.
Supply and Fixing factory made single extruded WPC solid UV printed decorative type flush door shutters of size 35mm thick comprising of virgin polymer of K value 58-60 ( suspension grade), calcium carbonate and natural fibres ( wood powder/rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N ( face) & 900N ( edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardnat . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary fulll body threaded star headed counter sunk SS screws , complete all as specified and directed by Engineer-in-charge.
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Box type Steel windows with tubular frame factory made with double shutter (wire gauged shutter & glass glazed shutter ) of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3 mm flat iron incl projecting type hinges, steel handle, steel peg stay dovetailed or welded , 4 Nos tower bolts 100mm long ,10mm square bar grills @75mm c/c welded to frame, incl painting two coats with synthetic enamel paint over a coat of primer, fixing of 3mm thick frosted glass panes and stainless steel wire gauge with putty and pins taking down existing window/ventilator on any floor complete all as specified and directed by Engineer-in-charge and shown on drg no CEPZ/TD-245/01 & and 246/02 sheet 1/2 & 2/2.
Supply and fixing factory made 25mm thick solid WPC(wood particle composit) sheet one side prelam sheet (of pattern as approved by GE)and other side wood nature colour for cupboard shutter of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc Complete as per direction of Engr-in-charge, Manufacture specification.
Supply and fixing in repair factory made 18/19 mm thick solid WPC(wood particle composit) without prelam sheet having both side wood nature colour for cupboard partitions/slabs of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, complete all as specified and directed by Engineer-in-charge. Manufacture specification.
Supply and fixing factory made 5mm thick PVC sheet white colour for kitchen cabinet/cupboard of density 600 kg /Cbm bent 90° complete all as specified and directed by Engineer-in-charge.
Material and Labour for 0.80 mm thick PVC edge binding tape around the 18 to 20 mm thick PVC shutter edge colour as directed, complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 200 mm long fancy type stainless steel handelsfor shutters complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for 100mm size hasp and staple,stainless steel safety type, fixed with screws complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for 50 mm dia polished hardwood knobs fixed with screws complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for high quality Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for stainless steel plain basket of size 17'' x 20'' x 6'' complete complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for stainless steel partition of size 17'' x 20'' x 6'' complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for stainless steel cutlery of size 17'' x 20'' x 6'' complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for stainless steel grain troly with stand of size 21" x 17" x 10" complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for stainless steel cup & soucer of size 17" x 20" x 4" complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for stainless steel plate basket of size 17'' x 20'' x 6'' complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for 20'' long telephonic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified and directed by Engineer-in-charge.
Supply and Fixing for Auto hinges for cabinet case complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repair inArt western white viterous china rimless wall hung WC of size 380 x 525 x 350mm with single peice slim concealed cistern of 6/3 Ltrs including floor mounted frame European water closet with CP bolts, nutsC.I. chair or other hanging arrangements with UF soft close seat cover , Bakelite/polypropylene seat and cover with CP hinges & rubber buffers, CP brass screws , trap,washer, CP health faucet 1200mm longand 8mm dia, jet etc with all accessories incl flush plate of chrome of size and pattern complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs decorative shape type table top Vitreous china wash basin, white of,size 495mm x 395mm x 150mm mm including CP waste coupling full thread of suitable sie of wash basin and waste pipei ncl fixing of central hole mixer all as spd and directed. Note : fixing of wash basin on granite/any type of surfacewith adhesive or any type of material deemed to be included in rate quoted by contractor complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repair for Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size not less than 400mm x 350mm x 180mm and including swan neck CP mixture and necessary fittings for mixing hot and cold water complete all as specified and directed by Engineer-in-charge.
Supply and Fixing fancy type long body Bib taps for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repair fancy type angular Stop cock 15mm bore pipe ,CP cast copper alloy complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repair CP 3-in-1 wall mixture with telephonic shower for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed by Engineer-in-charge.
Supply only chromium plated brass central hole single lever WHB Mixture for table top wash basin 15 mm bore for mixing hot and cold water with 450 long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe complete all as specified and directed by Engineer-in-charge.
Supply and fixing fancy type stainless steel shower rose with arm of pattern and size as approved by GE complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 15 mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repair Stop valve concealed type cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs CP soap dish fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-charge.
Fixing only in repairs old sanitary fittings incl. WC, Wash hand basin, wall Mixtures/centerhole mixtures of any type, Stop vaives, shower rose, bib taps, towel rails,glass corner etc into same or other opening incl necessary stainless steel fittings complete all as specified and directed by Engineer-in-charge.
Demolition of brickwork or stone boulder masonary built in Cement mortar or cement lime mortar incl all quoins, arches, pillars, etc complete all as specified and directed by Engineer-in-charge.
Excavation of trenches n.exc 1.5m wide and n.ex 1.5m in depth for foundation etc or for shafts , wells cesspits manholes , pier holes etc n.ex 10sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified.
Material and Labour for brick work with sub class "B" brick st or curved on plan exceeding 6 mtr mean radius and built in cm 1:4 etc complete all as specified and directed by Engineer-in-charge.
Material and Labour for complete Demolition of RCC as in slab/Column/beam and similar suspended works in any position etc complete including cutting off exposed reinforcement bars and making good the exposed surface with cement work , plaster and paint and complete all as specified and directed.
Material and Labour for dismentelling wall and ceiling board of any thickness including cover fillets complete all as specified and directed.
Material and Labour for fixing black solar control film reflective type film on Glass of alumunium doors complete all as specified and directed by Engineer-in-charge.
Material and Labour for fixing frosted sheet glass 5.5mm thick exc 0.5 Sqm as in al doors including all its fixtures complete all as specified and directed.
Material and Labour for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors with one or more rebates including jointing cleat for fixing complete all as specified and directed.
Supply and Fixing for powder coated Anodised aluminium door shutters, (powder coating of any color of thickness not less than 50 micron) aluminium section of thickness not less than 1.2mm including necessary joining cleats, glazing clips, ruber neoprene packing, handles in, hinges, anodised aluminum snap beading screws etc. of which provision is to be made for sliding of door shutter on guide rail and roller complete all as specified and directed by Engineer-in-charge. Note : minimum thickness of aluminum section shall be not less than 1.2mm thick.
Material and Labour for termite treatment along the external/internal wall below concrete or masonry apron or tiles using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by Engineer-in-charge.
Material and labour for RCC (1:1 ½:3) using 20mm graded stone aggregate as in foundation of column, pillar and post etc complete all as specified and directed.
Material and labour for MS TMT bars 8-10 mm dia cut to length, bend to shape including cranking, bending and binding with MS wire not less than 0.9mm dia
Form work to sides of column, posts, pilllars, columns and stanchions rough finished surfaces of finished concrete Square, rectangular or polygonal complete all as required at site or directed by Engr-in- Charge.
Stainless steel plates (plain or chequred), square cut or notched (ordinary and counter sunk) forming holes, without any attachment, including necessary running weilding for connection of parts to rafters and purlins Fe 410-W (Gde-E-250) quality-A complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Mild steel tubes for structural purpose as in posts, purlins, rafters and the like cut to length as required on site including running welding to the frame complete all as specified and directed by Engineer-in-Charge.
Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long dia of neck in MM exc 20mm but nexc 25mm, complete all as specified and directed.
Material and labour for designing, providing fabricated, assembling and erection of prestressed special arch membrane roofing structure with MS tubular framework (as per in structural steel) in desired profile as per conceptual drawing as per manufacturing and supplying standards by serge/Mahler verseidag/Sieen or etc, The membrane should confirm to the manufacturing and supplying standards being pre-pre-stretched in both weft and weft direction and anufacturing to perform best dynamic stability in both ward and ward direction with approved installers and manufacture for arch roofing with at least two executed job reference in this connection. The fabric must be of HT polyster yarns 110D coated with uniform 230 micron PVC coating over the ployster yard. The top coat over the PVC must be of height connentration with easy clean availability and superior while pigmentation of membrane. The dimensional stability of fabric should be measured as per elongation test of of 24 Hrs-10 DAN/5 cm which should confirm <1% (EN15977) and residual elongation should confirm <0.4% (EN15977) ensuring dimensional stability in both weft and ward direction, minimum weight should be 900-950 gm/sqm (EN ISO 22869-2) 4200/4000 N/50mm (EN ISI 1421) and tear strength of 550/500 N (DIN53363) and with a guarantee of 10 yrs from the manufacturer. Pole to pole spacing of the fabric should be required for the porch. The chargeable area will be fabric surface area including the measurement of the fitting used for fixing on foundation will be provided by the supplier and the foundation if any shall be made by the contractor. Foundation design drawing considering the wind pressure shall be provided by the supplier/contractor to GE for its approval. Minimum design criteria of the structure: Circular column: 100mm dia. Rafter/Purlin:75mm dia. Size of base plate : 200x200 mm, stainless steel plate thickness of 20mm with 20mm dia nut bolt, GI wire rope for fabric, deco primer and pain. 850 GSM while fabric, pole to pole distance min 2.5 m, clear height 2.5 m from FFL, excavation pit size 1m x1mx 1.2m, lean concrete 150 mm thick 1:4:8 type D2 for col footing 8-10mm dia TMT bar in footing and base column at 100mm centre to centre and also refer IS: 456 considering wind pressure, structural design, foundation RCC 1: 1 ½: 3 complete all as specified and directed by Engineer-in-Charge. Note: 1. Payment for structure steel, reinforcement steel including base plate, nut bolts and RCC shall be measured and paid separately under respective items
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engineer-in-charge.
M & L for Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V, FRLS grade with multistranded copper conductor ISI marked drawn through in concealed PVC/Steel conduit and accessories, modular white cover plate with frame and metal flush box for mounting of switches, socket regulator etc including 1.5 Sqmm PVC insulated unsheathed cable multistranded copper conductor and connecting to earth dolly for light, Fan, Plug and bell and making good the distributed surfacess completely matched and finished with existing surfacessall as directed and specified by Engr-in-charge. (a) One light/fan point controlled by one switch
(b) One 3 pin switch socket outlet point 5 Amps on independent board.
(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.
All as per above item but with 2.5 Sqmm cable for 15 Amp switch socket out let point on independent board including 1.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor complete all as specified and directed by Engineer-in-charge.
Supply and fix Shynora modular switch 1 way 6 Amps 1 module 230 Volts AC complete all as specified and directed by Engineer-in-charge.
Supply and fix Shynora modular socket outlet 6 Amps 2/3 pin combined 2 module 230 Volts AC complete all as specified and directed by Engineer-in-charge.
Supply and fix Shynora modular socket outlet 6/16 Amps 2/3 pin combined 2 module 230 Volts AC complete all as specified and directed by Engineer-in-charge.
Supply and fix Shynora modular switch 1 way 16 Amps 1 module 230 Volts AC complete all as specified and directed by Engineer-in-charge.
Supply and fix Shynora fan regulator 120 Watt -2 Module 230 V, step type complete all as specified and directed by Engineer-in-charge.
Supply and fix Shynora modular bell push flush type 10 Amps 1 module 230 Volts AC complete all as specified and directed by Engineer-in-charge.
Supply and fix Shynora call bell multimusic type, single pole, 230 volts AC complete all as specified and directed by Engineer-in-charge.
S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed by Engineer-in-charge.
Taking down old and u/s light fittings conventional type from wall surface / ceilling or any position and making good the disturbed surfaces complete all as specified and directed by Engineer-in-charge.
Supply & fixing 7.5 watt wall light flortine LED filament lamp complete fitting with all fixing arrangement complete including taking down with complete all as specified and directed by Engineer-in-charge.
Supply and fixing LED light fitting Muzrisis picture light 20 watt 220 V AC decorative type with and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge.
Supply and fixing LED light fitting Muzrisis laminar wall light 12 watt 220 V AC decorative type with and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-charge.
Supply and fixing Square Shape Integral decorative LED bollards with IP 65 degree of protection of capacity 9 Watt LED with all accessories complete errect / fixed / mount properly at directed place with reqd fixing/mounting arrangement and connecting/testing complete all as directed.
Supply and fix in repl of u/s and broken with new ventilating fresh air fan made of sturdy Engineering plastic complete with louvers shutters , 250 mm sweep, single phase, 230 Volts AC,1200 RPM,, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing complete all as specified and directed by Engineer-in-charge.
Supply and fixing ceiling fans complete with aerodynamic ABS blades,dimmable & tunable optionair delivery in its class with 18 poles motor , down rods, electronic regulator and accessories, 230 V, 1250 mm sweep. Min air delivery 280 m3/min CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)Make-Havells/Orient/Usha
M&L for factory made gate light junction box, single phase, 2 wire, 240 volts, weather proof pole mounted made out of 1.63 mm thick MS sheet of size 250x150x100mm depth, with properly insulated aluminium buses - 02 Nos of 32 Amps rated current cap with holes for connecting of cables, hinged door and locking bolt, handle complete all as specified and directed by Engineer-in-charge.
Taking down carefully unserviceable DB any type/size disconnecting and making good disturbed surfaces complete all as directed
Supply and fixing factory made epoxy powder coated distribution board double door VTPN 4 ways vertical type MCCB DB, with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management complete all as specified and directed by Engineer-in-charge.
Supply and fixing factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed by Engr-in-Charge
Taking down carefully unserviceable MCB SP/SPN/Isolator of any rating/size complete all as specified and directed by Engineer-in-charge.
Supply and fixing MCCB TPN 415 Volt C curve 10 KA 63 to 100 Amps capacity ccomplete all as specified and directed by Engineer-in-charge.
Supply and fixing MCB single pole & neutral 240 volt 'C' curve 10 KA 40 Amps complete all as specified and directed by Engineer-in-charge.
Supply and fixing MCB single pole 240 volt C curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one.
Taking down old and u/s sub main wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etccomplete all as specified and directed by Engineer-in-charge.
M&L for concealed sub main wiring using two single core PVC insulated, unseathed stranded copper conductor cable of size 6.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)complete all as specified and directed by Engineer-in-charge.
All as per Item above above but sub main wiring using two single core PVC insulated, concealed conduit suitable size ,unseathed FRLS multi stranded copper conductor cable of size 4.0 Sqmm with one run of PVC (green colour) insulated, unsheathed, FRLS multi stranded copper conductor of size 4 Sqmm as earth continuity conductor all as specified and directed.(Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)
Supply and fixing Single pole and neutral enclouser with two pin and earthplug and socket complete with one single pole MCB with 240 V 20 AMPs.
Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.3mm thick busied directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 5 of SSR part I 2009 or complete all as specified and directed by Engineer-in-charge.
Supply & Fixing PVC conduit of size 25 mm dia in wall / surface for existing telephone cable / Lan cable all as directed and specified by Enge in charge.
Material & Labour for earthing complete with copper earth plate elect rode 600x600x3mm thick buried directly in ground to a depth not less than 3 mtr deep below normal ground level with top edge of the earth plate not less than 2.25 mtr deep below normal ground level connected to copper strip 20x3mm size as earthing lead by means of soldering/brazing and bolts, nuts, check nuts and washers of brass, GI protection pipe light grade 40mm bore up to test point 20mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:2:4 type BI, RCC cover with suitable handle, earth pit filled with ground enhancing material i.e. mixture of copper sulphate, magnesia sulphate, graphite power etc mixed in equal quantity all around earth plate up to 150 cm and filled with vegetable soil above GEM up to ground level earth work in any type of soil all as required and directed including testing on completion. Make of chemical True power/JMV/Powertrac.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as mass concrete for path to bus bar/ panels complete all as specified and directed by EIC.
Supply , laying, commissioning and testing in replacement of old unservicable, laid in trenches/ducts or passing through pipe ,1100 volt grade LT UG cable with XLPE insulated armored heavy duty electric cable with stranded aluminium conductor 1100V grade 2 core cross sectional area 16 sqmm laid in trench or passing through pipe including necessary excavation, sand, bricks etc complete all as specified and directed by Engineer-in-charge.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in soft/ loose soil.
Returning, filling in, including spreading, levelling, watering and well ramming in not exceeding 25 cm thick complete.
Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.
Material and labour for dry river bed sand filling in trenches for cable cushioning below and above the cable complete all as directed by Eng- in -charge.
M/L Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick ccomplete all as specified and directed by Engineer-in-charge.
Supply and lay GI tube light grade with all fittings and fixed complete to walls and ceilings or laid in floors of size 40 mm dia complete all as specified and directed by Engineer-in-charge.
Material and labour for cutting of bituminous road / floor for laying of pipe / cables not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1;2;4,type B-1, 100 mm thick complete all as specified and directed by Engr-in-Charge.
M&L for dismentling and installation of existing split type AC 1.5TR/2TR capacity in the location as directed including provision of 45x45x5mm angle iron frame work for mounting of out door unit , fixing of indoor unit with the following :- (i) Fixing of condensor unit with one number compressor and blower / fan housed in cabinet shell of wheather proof factory made unit (ii) Fixing of wall mounted eavporator unit housed in PVC cabinet including blower and supply air grill (iii) Fixing of refrigerant piping made out of copper of 3/8" for discharge line and 5/8" for suction line duly insulated for required length as per site. (iv) Preparation of angle iron frame for condemsing unit and painting with two coats of bituminous paint over a coat of primer as per site requirement. (v) PVC pipe for the drain water removal from the room Note : Extra refrigerant pipe will be measured and paid seperately other than retrived against removed one
Suction and discharge copper tubing 3/8" and 5/8" for split type A?C including provision of insulation on the tubing complete all as specified and directed by Engineer-in-charge.
supply and Install , electric driven,complete up to Motor Power : 0.9 HP Booster Pressure Pump CM 3-6 of Grundfos inclusive of starter and PCC foundation, CM Pump is supplied with pressure tank for constant water pressure,Head 26-56 mtr. When the pressure drops to the pre-set level, the pump will start-up and when the water consumption drops again, the outlet pressure will rise to a pre-set stop pressure after which the pump will stop including electric and water pipe connection complete job complete all as specified and directed by Engineer-in-charge.
Supply and fixing with new wall mounted fan 400 mm sweep, single phase, 230 Volts with regulator, oscilation type complete fixed properly on wall and connecting/testing on load all as directed. Note : Old u/s fan will be deposited to E/M store yard. complete all as specified and directed by Engineer-in-charge.
A R ENTERPRISES
KUMAR TRADING CO
INDERJIT SINGH
new hi tech engineers and contractors
M/S SINGH AND ASSOCIATES
PARVINDER BHARDWAJ
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .