Construction of Vehicle Garrage and Furniture work at office of the Deputy Director Horticulture Dungarpur

Amount

Furniture work

Concrete table ( Size 600 mm per seat ) - Table make with 25 mm MDF post formed top and structure make with 18mm preicaminated particle board all edge convered with PVC edge bend type

Office/Visitor Chairs with seat DXWXII 430mm 300mm 350mm 460 moulded plywood, material soiled wood back cover fabric leathrite, back rest 15mm (1/-1 mm), frame material wood, densirt of polyurethane foam used in sent 45 Kg/Cub, M (+/-2 Kg./Cub. M), material of fabric of seat cover leathrite, densirt of polyurethane foam used in backrest 40 Kg/Cub, M (+/-2 Kg/Cub. M). Thickness of plywood used in seat 18mm (+/-1mm). GSM/thickness of fabric +/-5 (gram per sqm) 250 Gram per Sqm, Arm material wooden, thickness of polyurethane foam 50mm in backrest (+/-3mm), thickness of polyurethane foam 50mm in seat (+/ 3mm), chair type with arms tiype of seat and backrest moulded plueood. frame type 4 legs. Diamensions size of material 40mm teak wood, 890mm, seat depth 430mm (+- 10mm). seat width 300-350mm (+-10mm). seat height 460mm (+-5mm), backrest width 400mm (+-10mm). backrest height 350mm (+-10mm). Arm length 300mm (+ 5mm). Arm width 35-40mm (+-2mm) with polish as desired colour of ISO 18001:2007 certified furniture.

Supply of Office Table of Size 1500mmx900mm with table top of MDF Board 20mm thick, Height of table 760, 3 drawer storage unit fitted with automatic locking system on one side with stainles steel kyes in duplicate. Depth of storage unit is 557mm, width of storage unit 355.5mm height of storage unit 453mm, storage unit material 0.8mm thick and drawer material 0.63mm thick

Computer/Office Chair revolving chair with revolving with back tilting computer chair. Type of chair high back, tilt mechanism revolving with back tilting, locking mechanism back tilt and locking, seat depth adjustment fixed type, revolving mechanism designed with 360 degree-revolving type, pedestal base glass filled nylon, minimum thickness (in mm) of MS plate joining the back rest with seat of the chair 2 millimeter, seat meterial moulded PU, Minimum seat height from floor surface (mm) >400<-500, Actual seat height from floor surface (mm) 430 millimeter, seat height adjustment (mm) 100 millimeter, Width of seat (mm) >400<-450, Actual width of seat (mm) 450 millimeter, Depth of seat (mm) >450<-450, Actual depth of seat (mm) 430 millimeter, Seat upholstery material polyster fabric.

ELECTRIC WORK

Supply & fixing of Public Address system having following components of specifications as below of BOSCH/AHUJA/HARMAN make.

Central Control Unit

The amplifier should have line output of 17.5Volt DC/3A maximum (-34dBV) & power output of 50 Watt RMS )90W max.) with input of 1 balanced microphone (1mV/2KOhm), 2 unbalanced microphone (0.65mV/4.7KOhm) & 1 aux. point (100mV/470 K Ohm) with frequency response range of 60-14 KHz (0-3dB) & S/N retio not less than 60dB. The amplifier unit should have bass control (0-10 dB at 100 Hz), trible control 0-10dB at 10Kilo Hz. & speaker output of 40hm, 80hm, 160hm, 70V & 10V. The unit should be protected by AC fuse of 3A (1 nos) & powered by 220-240 Vold, 50/60Hz AC & 24 Volt DC supply, The unit must incorporate connection cable, Ext. cable etc. complete in all respect as required.

Chairman Unit

The chairman unit must have build in loud speaker of max, input 300mW, 16 ohm impedence & high quality sensitive condenser microphone (-63dBV per microbar & 7.5mV/Pa) mounted on 16" flexible gooseneck with a ring LED indicator. The unit should have priority switch, talk switch speaker volume control, head phone vol. control with micro phone auto switch off facility & 2.5m inter connecting cable etc. complete in all respect.

Delegate Unit

The deligate unit must have build in loud speaker of max. input 300mW, 16 ohm impedence & high quality sensitive condenser microphone (-63dBV per microbar & 7.5mV/Pa) mounted on 16" flexible gooseneck volume control, head phone vol. Control with micro phone auto switch off facility & 13 inter connecting cable for 13 Unit etc. complete in all respect.

Wall speaker Unit

POWER RATING: 30W RMS/45W Max. POWER TAPS: 30W, 30/20/15/10/5W IMPEDANCE/82/ VOLTAGE 100V FREQUENCY RESPONSE 75-20,000Hz, SPL at 1KHz (1W/1m), 87dB SPEAKER Woofer 100mm (4"). Tweeter 25mm (1" complete in all respect.

Mixing Amplifier Unit

The Mixing Amplifier must have Power Output of 120Watt RMS at 10% THD,Output Regulation <2db (no load to full load at 1kHz)Inputs Channels: 5x Mic 0.65mV/4.7ΚΩ Aux-1: 100mV/ 470ΚΩ, Aux-2: 100mV/470kΩ, MP3 Playback, Built-in MP3 playback facility (USB, SD and MMC card, Remote Control provided, Frequency Response 50Hz-15,000Hz ± 3dB Tone Controls Bass: 18dB at 100Hz Treble: ±8dB at 10kHz Signal to Noise Ratio 60dB Pre-amp Output 200mV/6000 Line Output 1V/1ΚΩ Output Taps for Speaker Matching 40, 80 8160 (for direct connections) Power Source 70V & 100V Line (for use with LMT) Protection AC: 220-240V 50/60Hz: DC 12V (Car Battery) AC: Fuse 3Amp. (T 3AL); DC: Fuse 14 Amp. (T 14AL) Power Consumption AC: 250VA: DC: 5.5 Amps (average)

Cordless Handheld microphone unit

The unit must incorporate a receiver unit & a cordless hand held microphone. The microphone should be dynamic, super cardioids type with RF output power of 15mW (max) & 100 dB dynamic range with internal dipole antenna. The microphone must have on/off switch with red LED & having AA type (UM- 3) alkaline cells with life of 15-20 hrs. The unit must have coverage area more than 200 feet. The receiver must have dual squelch & operate at quartz crystal locked VHF high band frequency & with frequency response range 50-15 K Hz. The unit must have telescopic antenna & audio output 0-55mV/1K ohm power on/off switch audio output vol. control, squelch level control and having red LED for power on, yellow LED for RF reception & green LED for audio signals the etc. S/N ratio should not be less than 100dB etc. as required.

Installation charges for PA system units complete with testing & commissioning of system at site as required.

SITC of Multimedia Projector of Brightness (ANSI lumens) 3800 Lumens, Resolution WXGA (1280x800), Native Aspect Ratio 16:10, Contrast Ratio (FOFO) 20,000:1, Display Color 30-bit (1.07 billion colors), Throw Ratio 1.55~1.7, Zoom Ratio 1.1x, Resolution Support VGA(640 x 480) to WUXGA_RB(1920 x 1200) *RB=Reduced blanking, PC in (D-sub 15pin) (x1), Monitor out (D-sub 15pin) (x1), Composite Video in (RCA)(x1), S-Video in (Mini DIN 4pin) (x1), HDMI in (x2), HDMI-1 (1.4a/HDCP1.4), HDMI-2 (1.4a/HDCP1.4) USB Type A (x1), USB Type Mini B (x1), RS232 in (DB-9pin) (x1) Speaker (x1), 10Watt with it's MOunting Accessoies complete in all Respect Make: Benq/Epson/Sony

Supply & installation of superior quality wall mount motorised screen of size 100 inches diagonal (152.4*203.2 cm), HD matte white fabric with anti UV coating, complete with suitable rating silent single phase electric motor, wired or wireless remote with batteries, wall mounted clamps etc as required to operate on 240V,50Hz power supply of approved makeMake :- SUVIRA/LUMINA or as approved by engineer in charge.

Supply and Installation of HDMI Cable to provide connectivity between Popup Box, Projector Rack and LED TV Make: Bestnet/Creston/Techut

Supply and Installation of 32" Smart LED TV having Display resolution 1366*768 (HD), Refresh rate 50-60Hz, usb ports, 1, hdmi ports 2, Power supply AC 100 - 240 Volts, 50-60 Hz, Operating System WebOS, Resolution Type HD Bluetooth Support Yes, Special Features Bluetooth Audio Playback (2 Way), Mounting Type Table & Wall Mount Speaker Maximum Output Power 10 Watts Speaker Configuration 2 Channel Wireless and Hardware Connection Interfaces Wi-Fi (Built-in), Bluetooth, LAN, USB, HDMI, ARC, Digital Audio Out (Optical) Make: Samsung/LG/Panasonic

Supply and Installation of HDMI Splitter having 1 HDMI IN Port and 4 HDMI Out port to Share screen between Popup Box to Projector and LED TV with all Installation Accessories as required Make: Bestnet/Creston/Techut

Supply and Installation of POPUP Box having 2 Port of 6A Power Socket, 1 HDMI, 1 VGA, 2 LAN, 1 C Type, 1 USB Port Complete in all respect Make: Bestnet/Creston/Techut

Supply and Installation of Audio multistrend Cable for Speakers

Accessories for Interconnection of Audio Conference System to Video Conference System including Aplifier and Speakers with Mics