SPECIAL REPAIRS TO SEWAGE LINE OF CENTRAL MI ROOM AND ATTACHED LIVING OF GRN BN AND CERTAIN REVENUE AND MINOR WORKS UNDER GE (WEST) COLABA

Amount

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in any type of hard / loose soil complete all as specified and directed

M & L for cement concrete 1:4:8 Type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M & L for PCC 1:5:10 type E1 (using 40mm graded stone aggregate) in lean concrete / filling concrete in sunken portion complete all as specified and directed.

M & L for cement concrete 1:3:6 type C-2 (using 20mm graded stone aggregate) as in sub base, floor, 75mm thick complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Brick work with sub class 'B' Brick straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M & L for hard core with broken stone or boulders of gauge n.exc 63 mm, deposited, spread & levelled in layers n.exc 100 cm thick watered & rammed to a true true surface complete all as specified and directed.

S & F joist, channel, angle, tee section or MS pipes fixed independently, without connecting plates etc Fe-290 (Gde E-165) (cut to ordinary lengths i.e. with in 20mm of the length indicated) complete all as specified and directed.

S & F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws / J hooks including flat iron wind ties complete all as specified and directed.

M & L for Rendering 15mm thick in cement mortar 1:4 using intergral water proofing compound on fair faces of brick work to be finished even and smooth (with out using extra cement) complete all as specified and directed. Note: Integral liquid water proofing compound to be used in per bag of cement shall be as per manufacturers instructions and paid separately under respective items.

Supply only integral waterproofing compound

M & L for rendering 15mm thick on fair faces of concrete/brick surface in CM 1:6 finished surface fair and even with out using extra cement complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over one coat of primer complete all as specifeid.

M & L for preparation of newly plaster surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc over 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for digital coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over and including rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and directed.

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing given in SSR part- II 2010 complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed.

S & F 150mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed.

S & F Butt hinges 100mm in size medium weight, cold rolled mild steel and fixed complete all as specified and directed..

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for Vitreous China water closet (Squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests and 'P' trap (excluding flushing cistern and flush pipe) complete all as specified and directed. Make : Hindware / Parryware / Cera sample as approved by GE.

S & F low level PVC flushing cistern of heavy duty, 10 Litres capacity syphonic action type complete with inlet, ball valve, float and handle including cast iron bracket and 32mm bore PVC flush pipe and connection to WC complete all as specified and directed.

S & F PVC connection 15mm outer dia, 450 long with two brass nut & rubber washer complete all as specified and directed.

S & F vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets, waste coupling and waste pipe complete all as specified and directed. Make : Hindware / Prayag as approved by GE.

S & F 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.

S & F vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. Make : Hindware / Parryware / Cera sample as approved by GE.

Material and labour for 18-20 mm thick granite (of any type and colour) machine cut as in urinal partitions and all other similar works including grinding, polishing, cutting grooves in wall for fixing granite with cement mortar 1:2 and all other arrangments complete all as specified and directed.

S & F urinals spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum wt 60 gms) fixed in position complete all as specified and directed. Make : Prayag / Polytuf sample as approved by GE.

S & F fancy type CP Towel Rail 60 cm long complete all as specified and directed. Make : Jaguar / Prayag as approved by GE.

S & F CP soap dish of approved pattern complete all as specified and directed. Make : Jaguar / Prayag as approved by GE.

Material and labour for PVC (SWR) floor trap, plain with grating including jointing with solvent cement of dia 75mm complete all as specified and directed.

Supply & Fix PVC soil, waste and rain water (SWR) drainage pipes 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply & Fix PVC soil, waste and rain water (SWR) drainage pipes 75mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F PVC (SWR) bends 75mm radius complete all as specified and directed.

S&F PVC (SWR) bends 110mm radius complete all as specified and directed.

M & L for RCC 1:2:4 type B0 (using 20mm graded aggregate) in lintels including use & Waste of formwork complete all as specified and directed.

M & L for Mild steel deformed bars 6 to 8mm dia cut to length bent to shape required including cranking and binding with mild steel wire not less than 0.9mm dia complete all as specified and directed.

S&F GI tubing, medium grade, 15mm bore with all fittings and laid / fixed to walls and ceilings complete all as specified and directed.

S & F stop valves,15mm dia cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F 15 mm dia bib taps, cast copper alloy with Chromium plated crutch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make :Jaguar / Prayag as approved by GE.

S & F concealed Stop cocks, fancy type, chromium plated, with long shank & cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed. Make :Jaguar / Prayag as approved by GE.

S & F powder coated any colour (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc and aluminum grills for windows complete all as specified and directed.

Material and labour for for anodised aluminium window and ventilator shutter, louvers type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading , screws and frosted glass panes of louvers complete all as specified and directed.

Supply and fix 5.50 mm thick frosted glass n.exc 0.5 sqm in each pane fixed to aluminium frames complete all as specified and directed.

Returning filling in including spreading, levelling, watrering an well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing of excavated material out of MOD land complete all as specified and directed.

Demolition of cement cocrete (unreinforced) not exceeding 15 cm thickness (above or below ground level) complete all as specified and directed.

Excavating in trenches not exc. 1.5 m wide and exc. 1.5 m but n.exc. 3.00 m depth for cesspits, manholes etc. and getting out in any type of soil even in foul position complete all as specified and directed.

Dismantling brickwork of stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brick work with use of old bricks (except bricks) obtained from dismantling built in cement mortar 1:4 material and labour complete all as specified and directed. Note :- Old serviceable bricks obtained from Srl No 52 shall be reused after proper cleaning.

M & L for PCC (1:3:6), type C-2 (using 40 mm graded stone aggregate ) in foundation filling, surface channels and mass concrete for bottom of manholes complete all as specified and directed.

Cutting into existing manhole for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC1:2:4 type B1, smooth finished and reforming benching as required for internal pipe of dia 100 mm complete all as specified and directed.

Cutting into existing manhole for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC1:2:4 type B1, smooth finished and reforming benching as required for internal pipe of dia 150 mm complete all as specified and directed.

Demolition and breaking of drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia 100 mm complete all as directed.

Demolition and breaking of drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia 150 mm complete all as specified and directed.

M & L for PCC 1:3:6 type C-2, (using 40 mm graded stone aggragate) as in concrete bed to 100 mm bore drain pipe including packing under and hunching against the sides of pipes after pipe laid and tested complete all as specified and directed.

M & L for PCC 1:3:6 type C-2, (using 40 mm graded stone aggragate) as in concrete bed to 150 mm bore drain pipe including packing under and haunching against the sides of pipes after pipe laid and tested complete all as directed.

M & L for 100 mm bore (internal dia of pipe) salt glazed stoneware drain pipe grade A laid in trenches and jointed complete all as directed.

M & L for 150 mm bore (internal dia of pipe) salt glazed stoneware drain pipe grade A laid in trenches and jointed complete all as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for RCC (1:2:4), type B-1 (using 20 mm graded stone aggregate) in Precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and direceted.

M & L in repair for PVC (SWR) gully trap in repair 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M & L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in coping, bed concrete and all other similar works including use and waste of form work complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forming moulds, mitered/stopped ends etc. complete all as specified and directed.

M & L for Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) exc 1.50 sqm but n exc 4.00 sqm each complete all as specified and directed.

S &F Door closer hydraulically regulated, Alluminium (extruded section body), designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg complete all as specified and directed.

M & L for floor door stopper of aluminium alloy body and tongue, anodised , with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed.

S & F stainless steel tube, channel, plates etc. made out of stainless steel sheet of grade X02Cr19NilO (304 S2), surface finish No. 4 as per IS 6911: 1992 as in framed work such as railing, walkway, staircase railing etc., welded suitably as per IS 5206: 1983 including necessary nuts, bolts etc. complete all as specified and directed by Engineer-in-charge.

M & L for Granite ( of any type ) stone / tiles 18-20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 15mm thick screed bed in CM 1:4 above Cill of Window/Ventilator and counter including rounding edges, rubbing and polishing complete all as specified and directed.

M & L for 75 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate ) as in floors, footpaths and pavings with broom finishing including necessary formwork complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Material and labour for 75 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in flooring / road subbase and all other similar works complete all as specified and directed.

M & L rubber moulded glossy finished precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over 25mm thick sand cushioning including compaction of paver blocks using surface vibrator all as specified and directed. Note: Sand cushioning will be measured and paid seperately.

S & F in repair counter sunk wash basin oval shape 450mm x 350 mm complete all as specified and directed. Make: Cat Part No. C0407 of Parryware or equivalent in CERA/Jaquar/Hindware.

S & F repair 15mm nominal size, central hole basin mixture with U shaped round casted spout with 450mm long pipe connection with aerator complete all as specified and directed. Make : Jaquar / Parko / Prayag as approved by GE.

M & L for machine cut, polished kota stone work 20 to 25 mm thick (Top rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over and including 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using with admixture of pigment to match with stone shade complete all as specified and directed.

M&L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (wall hung) white,incl. flushing cistern( Cat Part No. 21032 of Hindware) trap, connection to drain and flushing pipe, seat cover for wall hung pan including all fixing arrangments complete all as specified and dirceted. Make: Cat Part No. 20048 of Hindware or equivalent in CERA/Jaquar/Parryware

S&F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F 8mm thick HDHMR antifungal, borer resistant water resistant prelaminated board both sides wall panelling complete all as specified and directed. Make : Action Tesa

S&F PVC(SWR) branch piece, single (single Y) equal or unequal 110mm bore complete all as specified and directed.

S&F PVC(SWR) branch piece, single (single T) equal or unequal 110mm bore complete all as specified and directed.

M & L in repair 15 mm bore fancy type health faucet with SS hose complete all as specified and directed. Make : Jaquar / Prayag as approved by GE.

M&L rubber moulded glossy finished precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 80 mm thickness, M-35 Grade with grey cement and pigment laid over 25mm thick sand cushioning, incl. coping all around and including compaction of paver blocks using surface vibrator complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/ loose soil each n exc 0.5 Cum, getting out, returning, filling in , removing surplus soil to distance not exceeding 50.00 mtr and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified and directed.

S & F aluminium Deco grill Cat No-104 6 mm thick, cut to required size & shape and fixed in position with aluminium beading complete all as specified and directed by Engr- In - Charge.

M & L 75x75x6mm angle iron as in fencing post, incl cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mess) incl all necessary drilling , bolting or reveting etc

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured).

M & L for preparing new surfaces of steel and iron work of any description and girth at treated area n.exc 0.5 sq each and treated with Tar/ Coal tar black paint.

Material and labour for point wiring, in and including rigid non-metallic PVC casing capping, 19/ 20 mm dia suitable size, cutting chases for sinking for concealed boxes for wiring with 1.5 sqmm FRLSH PVC insulated, unsheathed, multi stranded copper conductor cable single core, 1100 volts grade with flush type metal boxes suitable for fixing switches, sockets and fan regulator etc., white or any colour cover plate with brass screws and cup washers including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part-I complete for one light point controlled by one switch.

All as per serial no.1 here-in but for One Exhaust Fan controlled by one switch and regulator

All as per srl item no 1 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified & directed by engr-in-charge.

S&F Switch piano, flush type single pole, one way 5 Amp. Make: Anchor / Fine / SSK sample as approved by GE.

S&F Switch socket combination, 6/16 Amp 2/3 pin 2/3 pin 15 Amp. Make: Anchor / Fine / SSK sample as approved by GE.

Supply & Fix ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and as directed. Make: Anchor / Fine / SSK sample as approved by GE.

Supply and Fix 20 watt LED, 6500 K, in repair, 4 feet long fixed including on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed Make:Havells cat pt no LHEXBXPNIN1W020 equivalent model in Wipro model no - Wipro Garnet 20 W LED Batten 6500K / Philips model No - BN150W LED 20S-6500 PSE ODGR / OSRAM.

Supply and fix MCB SP, 240 volt, 6 to 32 Amps complete all as specified and directed.

Supply and fix MCB SPN, 240 volt, 40 Amps complete all as specified and directed.

Supply and fix sheet metal enclosures for DBs, double door when MCBs to be used 240 volts 4 way, with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply & fix Exhaust Fans, AC single phase 230/ 240 V of size 250 mm sweep with louver, including making electrical connections with stranded copper conductor cable of size minimum 0.5 sqmm from ceiling rose to fan connector, necessary clamps, nuts bolts and washers complete all as specified and as directed by Engr-in-Charge. Make : Havells / Almonard / Crompton

S&F Sub main wiring with two run of 4 sqmm stranded copper conductor FRLSH wire with one run of 4 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 25 mm dia) for housing the wires for one AC point complete all as specified. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable with PVC conduite shall be measured as one length.

Mayur Enterprises

Vandan Enterprises

ASHOK CONSTRUCTION

Bidder Name

Unitech Enterprises

ASHOK CONSTRUCTION

Mayur Enterprises

Vandan Enterprises