Supply and Installation of Furniture at Library and Computer Building at COEP Technological University Pune

Furniture

Library chair -01 -SEAT SIZE: 50.0cm. (W) x 48.0 cm. (D) -BACK SIZE: 53.0 cm. (W) x 39.0cm. (H) -Injection moulded Seat with High Resilience polyurethane seat foam with density 45 kg/m³ & hardness 16 kgf. (Vendor to submit foam density and hardness laboratory test certificate) -M.S. Powder Coated Frames (DFT 50 microns) For 4 Leg Chairs -M. S pipe Dia 25mm (Vendor to submit powder coating laboratory test certificate) -Glass filled Polypropylene Armrest with the tubular frame. -Vendor should submit detail shop drawings with all dimensions.

Office chair SEAT SIZE- 53.5 cm. (W) x 51.0 cm. (D), of 1.5 cm thickness plywood preferably hot-pressed, furnished with fabric covers -MESH BACK SIZE- 51.0 cm. (W) x 70.0 cm. (H) -Seat with High Resilience polyurethane seat foam with density 45 kg/m³ and hardness 16 kgf (Vendor to submit foam density and hardness laboratory test certificate) -Glass filled Nylon Armrest with the tubular frame of 6 cm hight(Adjustable) -Center Tilt Synchro Mechanism with Seat Slide & Multi Lock, revolving 360° -Head rest sub-assembly with hight adjustment up to 4 cm. -Pneumatic height adjustment of 9.5cm, Pedestal Assembly of Polished Aluminium with twin wheel injection moulded soft castors of Nylon with PU lining, having up to 6 cm wheel Diameter. -Vendor should submit detail shop drawing with all dimensions.

Workstation Chair SEAT SIZE- 53.5 cm. (W) x 51.0 cm. (D), of thickness 1.5 cm plywood preferably hot-pressed, furnished with fabric covers. -MESH BACK SIZE- 51.0 cm. (W) x 70.0 cm. (H) -Seat with High Resilience polyurethane seat foam with density 45 kg/m³ and hardness 16 kgf (Vendor to submit foam density and hardness laboratory test certificate) -Glass filled Nylon Armrest with the tubular frame of 6 cm hight(Adjustable) -Center Tilt Synchro Mechanism with Seat Slide & Multi Lock, revolving 360° anti-shock mechanism. -Pneumatic height adjustment of 9.5cm, Pedestal Assembly of Polished Aluminium with twin wheel injection moulded soft castors of Nylon with PU lining, having 6 cm wheel Diameter. -Vendor should submit detail shop drawing with all dimensions.

Conference chair SEAT SIZE: 49.0 cm. (W) x 51.4 cm. (D) of thickness 1.2 cm plywood preferably hot-pressed, furnished with synthetic leather over moulded High Resilience Polyurethane foam. -MID BACK SIZE: 51.6 cm. (W) x 65.7 cm. (H) -Seat with High Resilience polyurethane seat foam with density 55 kg/m³ and hardness 16 kgf (Vendor to submit foam density and hardness laboratory test certificate) -chrome plated Up-Down adjustment armrest of 8 steps. -360° revolving type Front Pivot Synchro Mechanism, 4-position locking with anti-shock feature, tilting ratio of 1:2, Single point control. -Back Height Adjustability, adjusted in 5 positions. -Pneumatic height adjustment of 10cm, Pedestal Assembly (pedestal- 65 cm, pitch-center dia. 75cm) of Polished Aluminium with twin wheel injection moulded castors. -Vendor should submit detail shop drawing with all dimensions.

Study Chair with Writing Pad SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D) furnished with fabric covers and moulded Polyurethane foam -BACK SIZE : 53.0 cm. (W) x 39.0cm. (H) -Seat with High Resilience polyurethane seat foam with density 45 kg/m³ and hardness 16 kgf (Vendor to submit foam density and hardness laboratory test certificate) -M.S. Powder Coated Frames Dia 25mm (DFT 50 microns) For 4 Leg Chairs with glass filled Polypropylene shoe (Vendor to submit powder coating laboratory test certificate) -The Full Desklet made of 1.3 cm. thick, compact laminate board. having Front and back adjustment of 4 cm -Outer Dimension 59.5±0.1cm. (W) X 29.0±0.1cm -Vendor should submit detail shop drawing with all dimensions.

Conference Table with seating capacity of 18seats 2 STR MAIN - 1350 X 600 X 740 - 2 nos. -2 STR SHARED - 1350 X 600 X 740 - 2 nos. -2350W - 2350 X 850 X 740 - 2 nos. -Work Surface made of 25mm Thick Pre-laminated twin board with a high-quality wood matching 2 mm thick PVC lipping; Plastic access flap is provided for easy access to wires and cables -Under Structure consists of 18mm Thick Pre-laminated twin board wood matching 2 mm thick PVC lipping -Modesty Panel-Made of 18mm Thick Pre-laminated twin board of wood matching 2 mm thick PVC lipping -Powder coated accent metal strip provided below work surface made of 0.8mm CRCA or equivalent grade steel or equivalent steel, epoxy polyester powder coated (DFT 40-60 microns). (Vendor to submit powder coating laboratory test certificate) -Wire Management- An array of panels made of 0.8mm CRCA or equivalent grade steel or equivalent, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount 6 module electric switch plate is provided below worktop. Cut-out on top with two-piece injection moulded plastic part polymer component is fitted to pull out audio, video cables onto worktop and connect devices charger to power socket below worktop. Vendor should submit detail shop drawing with all dimensions.

Conference Table with seating capacity of 30 seats 2 STR MAIN - 1350 X 600 X 740 - 2 nos. -2 STR SHARED - 1350 X 600 X 740 - 8 nos. - 2STR -2350 X 850 X 740 - 2 nos. -Work Surface made of 25mm Thick Pre-laminated twin board with wood matching 2 mm thick PVC lipping; Plastic access flap is provided for easy access to wires and cables -Under Structure consists of 18mm Thick Pre-laminated twin board of high-quality wood matching 2 mm thick PVC lipping -Modesty Panel-Made of 18mm Thick Pre-laminated twin board of high-quality wood matching 2 mm thick PVC lipping -Powder coated accent metal strip provided below work surface made of 0.8mm CRCA or equivalent grade steel or equivalent steel, epoxy polyester powder coated (DFT 40-60 microns). (Vendor to submit powder coating laboratory test certificate) -Wire Management- An array of panels made of 0.8mm CRCA or equivalent grade steel or equivalent, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount 6 module electric switch plate is provided below worktop. Cut-out on top with two-piece injection moulded plastic part polymer component is fitted to pull out audio, video cables onto worktop and connect devices charger to power socket below worktop. Vendor should submit detail shop drawing with all dimensions.

Two-Seater Sofa Seat is made up of PU foam in Density 28 kg/cu.mtr with an additional top layer of super soft PU foam furnished with fabric or leatherette.(Vendor to submit foam density and hardness laboratory test certificate) -Back is made up of PU foam in Density 28 kg/cu. mtr with two additional top layers of super soft foam furnished with fabric or leatherette. -Under structure is made up of 1.2 cm. thick hot-pressed plywood with moisture resistance & termite proof. -6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over under structure for cushioning purpose. -Leg Assembly is a welded Assembly made in Stainless steel tube & plate with plastic endcap of 146 x 90 x 85.5 cm with Seat Height of 45 cm. Vendor should submit detail shop drawing with all dimensions.

Three-Seater Sofa Seat is made up of PU foam in Density 28 kg/cu.mtr with an additional top layer of super soft PU foam furnished with fabric or leatherette. (Vendor to submit foam density and hardness laboratory test certificate) -Back is made up of PU foam in Density 28 kg/cu. mtr with two additional top layer of super soft foam furnished with fabric or leatherette. -Under structure is made up of 1.2 cm. thick hot-pressed plywood with moisture resistance & termite proof. -6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over under structure for cushioning purpose. -Stainless steel (grade SS 202) o equivalent grade tube welded Leg Assembly with plastic endcap of 206 x 90 x 85 cm Seat Height 45cm. Vendor should submit detail shop drawing with all dimensions.

One Seater Sofa Seat is made up of PU foam in Density 28 kg/cu.mtr with an additional top layer of super soft PU foam furnished with fabric or leatherette. (Vendor to submit foam density and hardness laboratory test certificate) -Back is made up of PU foam in Density 28 kg/cu. mtr with two additional top layers of super soft foam furnished with fabric or leatherette. -Under structure is made up of 1.2 cm. thick hot-pressed plywood with moisture resistance & termite proof. -6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over under structure for cushioning purpose. -Stainless steel (grade SS 202) or equivalent grade tube welded Leg Assembly with plastic endcap of 86 x 90 x 85 cm Seat Height 45cm. -Vendor should submit detail shop drawing with all dimensions. Under structure is made up of 1.2 cm. thick hot-pressed plywood with moisture resistance & termite proof. -6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over under structure for cushioning purpose. -Stainless steel (grade SS 202) o equivalent grade tube welded Leg Assembly with plastic endcap of 86 x 90 x 85 cm Seat Height 45cm. Vendor should submit detail shop drawing with all dimensions.

Mobile Compactor storage unit-01 3 Bay Drive type Compactors with 3 Bay SD - 1 no, 3 Bay TD - 1 no, 3 Bay SL - 1 no. 3 -Size of compactor 2361H mm X 915 W mm x 457D mm, 3 Bay Channel 2400 mm - 3 no, 3 Bay Channel 800 mm - 3 no. -MAIN BODY: Rigid Knock Down construction made of 0.8 mm thick. CRCA or equivalent grade steel having 5 loading levels formed by 4 adjustable shelves for 1980 mm Height body and 6 loading levels with 5 adjustable shelves for 2361mm height body. -MAIN BODY FINISH: antirust surface treatment coated with epoxy polyester powder of approved colour & shade with a Dry Film Thickness of minimum 40 microns. (Vendor to submit powder coating laboratory test certificate) -SHELF CONSTRUCTION: Rigid Knock Down construction made of 0.8 thick CRCA or equivalent grade steel. Each body block consists of 1 Main unit & then Add-on units. -FRONT COVER made of 0.8 thick CRCA or equivalent grade steel which the handles Drive unit having holes on the front surface for ventilation purpose. -BACK COVER made of 0.8 thick CRCA or equivalent grade steel which the handles Drive unit having holes on the front surface for ventilation purpose. -BACK PANEL made of 0.6 thick CRCA or equivalent grade steel fixed together using machine screws to prevent access to inside files from the outside. -DOOR FRAME made of 0.8 thick CRCA or equivalent grade steel of 2 vertical door stiffeners providing rigidity to the entire body. -SHELF FINISH: antirust surface treatment coated with epoxy polyester powder of approved colour & shade with a Dry Film Thickness of minimum 40 microns. (Vendor to submit powder coating laboratory test certificate) -SHELF CONSTRUCTION 12-bend panel made of 0.7 thick CRCA or equivalent grade steel having max load bearing capacity is 100 Kg uniformly distributed per shelf, height of 351mm between two shelves. The last loading level for shelf is 1721mm from ground level for 1980H body and 2107mm from ground for 2361H body. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitches. There are 4 adjustable shelves per body for 1980H and 5 adjustable shelves per body for 2361H, giving 5 and 6 loading levels for 1980H and 2361H body respectively. -STORAGE CAPACITY made of 0.8thick CRCA or equivalent grade steel having hinged door have recessed Die cast Handle cum lock with 3 way locking through a lever & shooting bolt and can hold up to 10 nos. of box files -UNDER STRUCTURE CONSTRUCTION welded frame suitably fabricated to bear the loads based on configuration consists of the Main channel, body-fixing channel, U-channel, and Z-channel made of HR sheet 3 mm thick. -UNDER STRUCTURE CONSTRUCTION FINISH epoxy polyester powder coat of approved colour & shade with a Dry Film Thickness of minimum 40 microns. (Vendor to submit powder coating laboratory test certificate) -MOVEMENTS OF THE SYSTEM is Drive Type Configuration achieved by rotating a PU hand wheel connected to the rollers through a ‘Sprocket-Chain’ arrangement mounted on the side of the body covered by a 1 mm thick CRCA or equivalent grade steel sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm -RAIL CHANNELS- a ‘C’ section 3 mm thick HR sheet on which Rail MS bright bar of sq 25.4mm is firmly fixed from bottom using counter sunk screws. The rail channels are of 3 lengths i.e., 800mm, 1600mm and 2400mm. Label Holder is an aluminium extrusion of length 453mm for LD/SD and 910mm for TD, fitted on to front cover of body. Vendor should submit detail shop drawing with all dimensions.

Mobile Compactor Storage unit -02 3 Bay Drive type Compactors with 3 Bay SD - 1 no, 3 Bay TD - 2 no, 3 Bay SL - 1 no. -Size of compactor 2361H mm X 915 W mm x 457D mm, 3 Bay Channel 2400 mm - 1 no, 3 Bay Channel 800 mm - 1 no. -MAIN BODY : Rigid Knock Down construction made of 0.8 thick. CRCA or equivalent grade steel having 5 loading levels formed by 4 adjustable shelves for 1980 mm Height body and 6 loading levels with 5 adjustable shelves for 2361mm height body. -MAIN BODY FINISH: antirust surface treatment coated with epoxy polyester powder of approved colour & shade with a Dry Film Thickness of minimum 40 microns. (Vendor to submit powder coating laboratory test certificate) -SHELF CONSTRUCTION: Rigid Knock Down construction made of 0.8 thick CRCA or equivalent grade steel. Each body block consists of 1 Main unit & then Add-on units. -FRONT COVER made of 0.8 thick CRCA or equivalent grade steel which the handles Drive unit having holes on the front surface for ventilation purpose -BACK COVER made of 0.8 thick CRCA or equivalent grade steel which the handles Drive unit having holes on the front surface for ventilation purpose. -BACK PANEL made of 0.6 thick CRCA or equivalent grade steel fixed together using machine screws to prevent access to inside files from the outside -DOOR FRAME made of 0.8 thick CRCA or equivalent grade steel of 2 vertical door stiffeners providing rigidity to the entire body -SHELF FINISH: antirust surface treatment coated with epoxy polyester powder of approved colour & shade with a Dry Film Thickness of minimum 40 microns. (Vendor to submit powder coating laboratory test certificate) -SHELF CONSTRUCTION 12-bend panel made of 0.7 thick CRCA or equivalent grade steel having max load bearing capacity is 100 Kg uniformly distributed per shelf, height of 351mm between two shelves. The last loading level for shelf is 1721mm from ground level for 1980H body and 2107mm from ground for 2361H body. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitches. There are 4 adjustable shelves per body for 1980H and 5 adjustable shelves per body for 2361H, giving 5 and 6 loading levels for 1980H and 2361H body respectively. -STORAGE CAPACITY made of 0.8thick CRCA or equivalent grade steel having hinged door have recessed Die cast Handle cum lock with 3 way locking through a lever & shooting bolt and can hold up to 10 nos. of box files -UNDER STRUCTURE CONSTRUCTION welded frame suitably fabricated to bear the loads based on configuration consists of the Main channel, body-fixing channel, U-channel, and Z-channel made of HR sheet 3 mm thick. -UNDER STRUCTURE CONSTRUCTION FINISH epoxy polyester powder coat of approved colour & shade with a Dry Film Thickness of minimum 40 microns. (Vendor to submit powder coating laboratory test certificate) -MOVEMENTS OF THE SYSTEM is Drive Type Configuration achieved by rotating a PU hand wheel connected to the rollers through a ‘Sprocket-Chain’ arrangement mounted on the side of the body covered by a 1 mm thick CRCA or equivalent grade steel sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm -RAIL CHANNELS- a ‘C’ section 3 mm thick HR sheet on which Rail MS bright bar of sq 25.4mm is firmly fixed from bottom using counter sunk screws. The rail channels are of 3 lengths i.e., 800mm, 1600mm and 2400mm. Label Holder is an aluminium extrusion of length 453mm for LD/SD and 910mm for TD, fitted on to front cover of body. Vendor should submit detail shop drawing with all dimensions.

Magazine Stand Overall Dimensions 900mm(W)x450mm(D)x1830mm(H). -Steel Periodical Display Rack Providing, placing and supplying of display rack. -Rigid Knockdown construction, Panels shall be made from CRCA or equivalent grade steel 0.6 mm thick -Front frame shall be made from CRCA or equivalent grade steel 0.8 mm thick. CRCA or equivalent grade steel D grade. -There shall be 5 level racks, suitable for full cape size magazines, periodicals, aesthetically appealing metal tray at an angle for easy viewing. -Receding facility to access the storage behind. -Uniformly Distributed Load capacity per each shelf is 40 kg. -Shall be epoxy polyester powder coated to the thickness of 50 microns. (Vendor to submit powder coating laboratory test certificate) Vendor should submit detail shop drawing with all dimensions.

Storage Cabinet 1 Body made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edge band. The shelves is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The Back panel is 9mm White PLT assembled with suitable fittings. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. -Doors made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the centre of the door having suitable hinges and HDU is fitted with height adjustment and has a three-point lock. -All the storages are fitted with a 6 mm leveller at bottom for levelling as per order. Vendor should submit detail shop drawing with all dimensions

Storage Cabinet -02 Body made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edge band. The shelves is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The Back panel is 9mm White PLT assembled with suitable fittings. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. -Doors made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the centre of the door having suitable hinges and HDU is fitted with height adjustment and has a three-point lock. -All the storages are fitted with a 6 mm leveller at bottom for levelling as per order. Vendor should submit detail shop drawing with all dimensions

Library Table 1 1650 x 600 desk based modular workstation with System ht-750 mm. -PARTIAL SCREENS: Fabric T- mould, 19mm thick Screen of 450mm ht., mounted on Studs. -LEGS: Providing metal powder coated Cube leg vertical (40x40mm)& Rigid Support (50X30mm). Legs are for standard workstation height of 750mm. All legs have levelling screws for adjustment in case of uneven floor. -UNDERSTRUCTURE Comprising of metal powder coated cross, Made up of metal powder coated finish -WIRE MANAGEMENT: Electric Switch plate of 8+3 module for Power and Data points. -WORKSURFACE – 25 mm thick prelaminated particle board with flat pvc lipping edge banding of size 1650 mm W x 600 mm D. -Vendor should submit detail shop drawing with all dimensions.

Library Table -2 2400 x 1200 Providing and placing modular workstation desk based modular workstation with System ht - 750 mm. -LEGS: Providing metal powder coated Cube leg. Legs are for standard workstation height of 750mm. All legs have levelling screws for adjustment in case of Uneven floor. -UNDERSTRUCTURE Comprising of metal powder coated cross, Made up of metal powder coated finish -WIRE MANAGEMENT: Electric Switch plate of 8+3 module for Power and Data points. -WORKSURFACE – 25 mm thick prelaminated particle board with flat pvc lipping edge banding of size 2400 mm W x 1200 mm D. Vendor should submit detail shop drawing with all dimensions.

Reception Table WORK SURFACE made of 25mm Thick Pre-laminated twin board of high quality Wood and approved shade confirming to Edge banded with matching 2 mm thick PVC lipping. -WIRE MANAGEMENTU-Access Flap along with a Grommet is provided on work surface for wire management. Power box made with 0.8 mm thick CRCA OR EQUIVALENT GRADE STEEL, with Electric switch plate of 8+3 Module which is fixed with worktop along the width atAccess Flap position. Wire Riser made of 0.8mm CRCA or equivalent grade steel is provided for proper wire management. -Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of high quality wood and approved shade, Edge banded with matching 2 mm thick PVC lipping. -Under Structure and TOP shelf – Made of 18 mm Thick Pre-laminated twin board of high-quality wood and approved shade, Edge banded with matching 2 mm thick PVC lipping - Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of high quality wood and approved shade, Edge banded with matching 2 mm thick PVC lipping. Drawer bottom is made of 5.5thick MDF whiteboard Handle is provided for ease of opening. HDU and Drawer are provided with cam lock for security. -Organizer Plate made of 1.2mm CRCA or equivalent grade steel is provided for magnetic sticky notes. -Bag Hanger Hook made of 1.2mm CRCA or equivalent grade steel is provided for bag hanging 2400 x 1770 x 870 mm

Side Table Providing, supplying and placing of side table. -SIDE TABLE GLASS is 10 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade or equivalent for facing with under structure. -Under structure is a welded Assembly made in SS202 or equivalent grade -Width of table= 60.0 cm, Depth=60.0 cm, height=34.9 cm. Vendor should submit detail shop drawing with all dimensions

Central Table Providing, supplying and placing of coffee table. -CENTER TABLE GLASS is 10 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 or equivalent grade for facing with under structure. -Under structure is a welded Assembly made in SS202 grade or equivalent -Width of table= 112.0 cm, Depth=60.0 cm, height=34.9 cm. Vendor should submit detail shop drawing with all dimensions

Round Table Circular 900mm Providing and placing meeting tables with worktop height - 750 mm. Cube legs vertical (40X40mm).Rigid Support-(50x30mm) are available for work top level 750 mm from base. -WORKTOP is 25mm thick prelaminated particle board with pvc lipping as per order. Vendor should submit detail shop drawing with all dimensions

Table A- 750X1500 Providing and placing desk based modular workstation with System height - 750 mm. -Legs Providing metal powder coated Cube leg vertical (40x40mm) Rigid Support (50x30mm). Legs are for standard workstation height of 750mm. All legs have levelling screws for adjustment in case of uneven floor. -Under structure made up of metal powder coated finish and the entire assembly are fixed to the worktop. -Wire Management will be provided with electric switch plate of 8+3 module, considered for Power and Data points. . (Vendor to submit powder coating laboratory test certificate) -Metal modesty and wooden modesty are mounted on the worktop perforated with the help of the modesty mounting brackets at 400 mm from ground. -Worksurface of 25 mm thick prelaminated particle board with flat pvc lipping edge banding of size 1500x 750 mm for Main table as per order. Vendor should submit detail shop drawing with all dimensions

Meeting Table Eight-Seater 2350 X 1150 mm WORK TOP Made of 25mm Thick Pre-laminated twin board of high-quality Wood; Edge banded with matching 2 mm thick PVC lipping. Access panels provided with soft closing hinges. -Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of high-quality Wood; Edge banded with matching 2 mm thick PVC lipping. Access panels provided with soft closing hinges. Aluminium alloy 63400 or equivalent - WP profile is added at bottom edges for improving the aesthetics. -Wire Management will be provided with electric switch plate of 8+3 module, considered for Power and Data points. Beside each cut-out, an additional cut-out with plate is provided for mounting Audio-Visual Cables (e.g. HDMI, VGA-A, etc.) Vendor should submit detail shop drawing with all dimensions

Table B Supplying and placing in position Main Table, of dimension 1800x2100x750 mm. -Primary Work Surface Made of 25mm thick MDF one side pre-laminate board with 0.4mm PVC. -Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board with 0.4mm PVC. -Under structure Made of 25mm Thick Pre-laminated twin board of high quality wood, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of High-Quality Wood, Edge banded with matching 2 mm thick PVC lipping.  Drawer fronts made of 25mm thick MDF one side pre-laminate board with 0.4mm PVC membrane pressed on to top. Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Vendor should submit detail shop drawing with all dimensions.

Modular, space-optimizing Desk with Bench N (Three-Seater Curved) Providing, supplying and placing of Desk cum Bench N Seater product which provides an elegant, modular solution with 360-degree swivel seat for easy entry/exit and height-adjustable -Legs are made of MS ERW or equivalent tube section of size 75x25x2 mm thick oval tube with 5 mm thick HR bracket sand 2mm thick CRCA or equivalent grade steel brackets on to the tubes. -Assembly is powder coated with epoxy polyester. Leg height varies from 705 to 1005 in pitch of 50 as per layout. Sturdy anchoring by anchor bolts on to base of 8mm thick plate for proper resting of Leg. Shoe made of Nylon are provided at the bottom for covering the base plate. -Two side clads made of e18 mm thick plate with 0.8mm thick pvc lapping and on the outside covered with welded metal structure made of 2 mm thick CRCA or equivalent grade steel powder coated with Epoxy polyester. -Worktop are made of 25 mm thick Pre-Laminated Board of High-Quality Wood; All the edge of work surface should provide with machine pressed 2 mm thick pvc edge band glued with hot melt glue. -Seat has self-closing mechanism. Seat under structure is made from combination of welded fabricated structure of 5mm Thick HR and 8mm thick ply with moulded PU foam of density 55 kg/cu.mtr. with stitched fabric made of leatherette or foam back fabric. (Vendor to submit foam density and hardness laboratory test certificate) -Seat back is made from combination of 8mm thick ply with moulded foam on top which in turn is covered with stitched upholstery made leatherite as per or foam back fabric. (Vendor to submit foam density and hardness laboratory test certificate) -Seat support frame is made from combination of MS ERW or equivalent grade tube section of size 80x40x2.5 mm thick rectangular tube and MS ERW tube section of size 48x19.1x2 mm thick oval tube welded together. Assembly is powder coated with Epoxy polyester. -Modesty is made of 25mm thick pre-laminated twin board of high-quality wood, All the edge of modesty are provided with machine pressed 2 mm Thick pvc edge band glue with hot melt glue. Vendor should submit detail shop drawing with all dimensions .

Table c 1650x600x770mm Providing, supplying and placing of conference table with Product size 1650 X 600 X 770mm -Worktop should be made of 25mm thick high-quality wood, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. -All tables are provided with heavy duty table connector made with metal integrated Engineering plastic. -Modesty should be made of 15mm high quality wood, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. -Recta table modesty is provided with a latch made of 2mm thick CRCA or equivalent grade steel and is powder coated with min 45-micron thickness of epoxy polyester coating. Latch is fixed with knurled bush made of 20mm Dia MS Rod in a black finish. Latch can be used to align modesty if two or more recta tables are connected side by side. (Vendor to submit powder coating laboratory test certificate) -Modesty is provided with rubber stopper made of TPE rubber to reduce banging while folding table. -Legs should be made by welding the combination of MS ERW or equivalent grade round Tube Ø63.5 X 2mm thick, flanges made CRCA or equivalent grade steel sheet of 1.6mm thick and 1.2mm thick inside plates made of HR 5mm thick Sheet. Assembly is epoxy polyester powder coated (Min 45 micron). -Legs are provided with casters of Ø65 mm lockable type for ease of movement and can be locked when required at any position. Each castor is also provided with 2 knurled disk of 50mm dia and 5 mm thick made of MS bar with ZN black finish for levelling adjustment of 10mm.. -Table top connected with spring loaded mechanism with pull handle made of MS ERW Ø16x1.2mm thick with an insert tube of Ø12.7x1.6mm thick tube. Coated with epoxy polyester powder coated (Min 45 micron) to operate table top. (Vendor to submit powder coating laboratory test certificate) -Table top with modesty folds upside at offset centre pivot provided on support bracket which is Aluminium alloy pressure die cast part coated with epoxy polyester powder coat (Min 45 micron). Modesty is connected to worktop with 90 deg rotating hinge made of Engineering plastic. -All type of tables are provided with power box which has two universal power socket of 2 AMP each, one switch of16 AMP and 1 fuse of 4 AMP with 1000mm cable with male and female GST connector. -All tables are provided with wire channel and wire clip made of 1.2mm thick Spring steel and is powder coated with min 45 micron thickness of epoxy polyester coating (Vendor to submit powder coating laboratory test certificate) Vendor should submit detail shop drawing with all dimensions.

Workstation L Type Providing and placing desk based modular workstation with System height - 1200 mm. -PARTIAL SCREENS: Fabric T- mould, 19mm thick Screen of 450mm ht., mounted on Studs. -Legs Providing metal powder coated Cube leg. Legs are for standard workstation height of 750mm. -Under structure made up of metal powder coated finish and the entire assembly is fixed to the worktop. -Wire Management will be provided with Electric Switch plate of 8+3 module, considered for Power and Data points. -Worksurface of 25 mm thick prelaminated particle board with flat pvc lapping edge banding of size 1500x1500x600 mm. -Metal and wooden modesty are mounted on the worktop with the help of the modesty mounting brackets. -Nova Free Standing Pedestal With Flat Metal Front Of Size 390w X 435d X 646ht, 1dr = 1 Box + 1 File, Central Locking. Vendor should submit detail shop drawing with all dimensions.

workstation 2 -900x600mm Providing and placing high-functionality, modular office workstation system & tile based modular workstation, with partition thickness as 52.4 mm thick and ht - 1200 including powder coated aluminium trims. -FIN are 22.5 mm thick panel which are 18 mm thick ply boards wrapped with fabric at intermediate level. Top block finished in fabric finish. Bottom block is finished in metal finish. -WIRE MANAGEMENT: Wires shall be taken into the system through cable ducts from the junction boxes and it is carried up to the panels through concealed conduits inside the blocks. -Half Screen with Frame at intermediate position between 2 people and at the end above worktop in Fabric finish. -Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. All partitions and side panels have levelling screws for adjustment in case of Uneven floor -WORK SURFACE of 25 mm thick prelaminated particle board with flat pvc lapping edge banding of size 900 mm w1 X600 mm d as per order. -Vendor should submit detail shop drawing with all dimensions.

Workstation 3- 900x600mm Providing and placing high-functionality, modular office workstation system & tile based modular workstation, with partition thickness as 52.4 mm thick and ht – 1050mm including powder coated aluminium trims. -FIN are 22.5 mm thick panel which are 18 mm thick ply boards wrapped with fabric at intermediate level. Bottom block is finished in metal finish. -WIRE MANAGEMENT: Wires shall be taken into the system through cable ducts from the junction boxes and it is carried up to the panels through concealed conduits inside the blocks. -Half Screen with Frame at intermediate position between 2 people and at the end above worktop in Fabric finish. -Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. All partitions and side panels have levelling screws for adjustment in case of Uneven floor -WORK SURFACE of 25 mm thick prelaminated particle board with flat pvc lapping edge banding of size 900 mm w1 X600 mm d as per order. -Vendor should submit detail shop drawing with all dimensions.

Main Table 1650 X 750, ERU- 1200W X 450D with pedestal Modular desk-based system of height 750 mm. -Cube legs are fabricated by Argo Shield & have a square section. Cube legs(40x40mm) and Rigid Support (50x30mm) are available for work top level 750 mm from base. -WIRE MANAGEMENT: Single Power box with raiser for Manager Modules, Single tables (8+3 Anchor Roma). Soft closing access flap with brush. -Metal modesty is made from 0.8 mm thick CRCA OR EQUIVALENT GRADE STEEL. Metal modesty is mounted on the worktop with the help of the modesty mounting brackets. -Worktop of 25mm thick prelaminated particle board with pvc lapping. -Nova Free Standing Pedestal with Flat Metal Front of Size 390x435x646 mm, 1dr = 1 Box + 1 File, Central Locking. Vendor should submit detail shop drawing with all dimensions

Modular, space-optimizing Desk Legs are made of MS ERW or equivalent grade tube section of size 75x25x2 mm thick oval tube with 5 mm thick HR brackets and 2mm thick CRCA or equivalent grade steel brackets welded on to the tubes. Assembly is powder coated with epoxy polyester. Leg height varies from 705 to 1005 in pitch of 50 as per layout. Sturdy anchoring by anchor bolts on to base of 8mm thick plate for proper resting of Leg. -Shoe Made Of Nylon are provided at the bottom for covering the base plate. -Two side clads made of 18 mm thick plate with 0.8mm thick pvc lapping and on the outside covered with welded metal structure made of 2 mm thick CRCA or equivalent grade steel powder coated with Epoxy polyester. -Worktop are made of 25 mm thick Pre-Laminated Board of El-P2 Grade and approved shade. All the edge of work surface are provided with machine pressed 2mm thick pvc edge band glued with hot melt glue. -Modesty is made of 25mm thick pre-laminated twin board of E1-P2 Grade and approved shade. All the edge of modesty are provided with machine pressed 2 mm Thick pvc edge band glue with hot melt glue as per order. -Vendor should submit detail shop drawing with all dimensions.

Please Enable Macros to View BoQ information