Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹4.9 LAdmitted-Finance 115 5 NADIBHAG 1ST LANE BADU ROAD MADHYAMGRAM KOLKATA 700128 | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700128 | L1 | Admitted-Finance | ||
| 2 | L2₹4.9 L+₹1,617.50 (0.33%)Admitted-Finance | L2 | Admitted-Finance | ||
| 3 | L3₹5.1 L+₹17,155.34 (3.50%)Admitted-Finance 21 KBM CHAKDAH P O P S CHAKDAH DIST NADIA PIN 741222 | CHAKDAH | NADIA | WEST BENGAL | 741222 | L3 | Admitted-Finance |
Tender Value
₹4.9 L
EMD Value
₹10,000
Closing Date
20 Aug 2026, 2:00 pmClosed
DG(W_S)
5 S N Banerjee Road, Kol-13
INSTALLATION OF 900 MM DIAMETER BUTTERFLY VALVE ON 1200 MM DIAMETER INLET PIPELINE WITH SPACER AND ALLIED WORKS AT DASPARA BPS
2026_KMC_1037140_1
WS/DSPBPC/26-27/05
Open Tender
MECHANICAL
Percentage
15 days
Kalight BPS
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹10,000
9 Oct 2026
10 Aug 2026
22 Aug 2026
10 Aug 2026
20 Aug 2026
10 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I. / D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.3.7Supplying and fabricating 20 mm to 32mm thick (finished thickness) M.S flange. properly ribbed, one face machined, including drilling holes as perstandard table, fitting and fixing the same with M.S. pipe by electric arc welding as per relevant I.S. specification using standard electrodes and direction of the Engineer-in-Charge. [ The Engineer-in-Charge shall approve the electrodes for arc welding before use] 900mm dia | 4 | EACH | 24,926 | ₹99,704 |
| 2 | M.S PLATE AS PER IS : 2062 -2011/LATEST REVISION, MAKE :
SAIL/ TATA/JINDAL 1.B) ABOVE 2 MM UPTO 10 MM THICKNESS
(USOR (M&E) WEF 10TH MAY,2022, IRRIGATION & WATERWAYS
DEPARTMENT, GOVT. OF WB) | 110.92 | KILOGRAM | 73 | ₹8,097.2 |
| 3 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,
GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with
gas or electric: (b) Continuous weld. | 9,796.8 | PER CM RUNNING | 9 | ₹88,171.2 |
| 4 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,
GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with
gas or electric: (a) Tack weld | 340 | POINT | 9 | ₹3,060 |
| 5 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I.
/ D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.4Valves 2.4.1
Lowering, fitting and fixing of all types of valves in proper position and
alignment using chain pully block or crane(for diameter above 250
mm) by providing temporary support,as required,gaskets,nuts& bolts
etc.all cornplete as per specification and direction of the
Engineer-in-Charge.[The rate Includes cost of flange joints]900mm
dia. | 1 | EACH | 14,941 | ₹14,941 |
| 6 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I.
/ D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.1.6 Flange joint
to C.l./D.l/MS. pipes and specials including supply of rubber gasket.
nuts. bolts. washers etc. of best quality to make the joint watertight at
required hydraulic pressure all complete as per specification &
direction of the Engineer-in-Charge. Diameter in mm 900mm dia. | 4 | EACH | 6,877 | ₹27,508 |
| 7 | Hiring charge of 1 no. 125KVA 3 Phase silent DG set including supply
& fixing of 400 Amp 4 pole changeover switch and laying of required
capacity and lenght of cable with connection as reqd. (on temporary
basis) and engaged one generator operator round the clock to run the
generator as and when required(Including Fuel). | 3 | DAILY | 6,350 | ₹19,050 |
| 8 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I.
/ D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.3 M.S. Pipes
2.3.1 Gas cutting of M.S. pipes and/or M.S. plates of different
thickness all complete as per specification and direction of the
Engineer-in- Charge. Thikness in mm 5mm to 8mm thick plate | 30.93 | METER | 298 | ₹9,217.74 |
| 9 | CHAPTER - VII MISCELLANEOUS ITEMS Dewatering by pumps
including all leads, lifts and making all arrangements of disposal.
where continuous flow of water from a source other than natural or
ground water is encountered in case of emergency maintenance
works related to leakage. breakage and making wet connections.
[Note ;- In case of any other situation demanding such emergency
dewatering. use of this item is to be approved by the Superintending
Engineer/Tender Accepting Authority. This item shall be executed on
the specific direction duly supported by proper clarification of the
E.I.C. who will be satisfied in absolute discretion that such work has
not been necessitated due to any natural source of water or any fault
of the Contractor] | 1,312 | HORSE POWER HOUR | 33 | ₹43,296 |
| 10 | CHAPTER - VII MISCELLANEOUS ITEMS Coating of 'Food Gr.
Epoxy' Resin of thickness not less than 240 micron with a
low-viscosity, crystallization-resistant food grade epoxy resin base
with a reactive diluents combined with high build epoxy amine
adducts as per BS 5493 standard and a polyamide or amido
polyamine or any other suitable hardener. It shall react with epoxy
resin at normal ambient temperature, suitable for solvent-free
coatings as per recommended proportion for use on metal, concrete
and wood surface to protect from corrosion, give anti-fungal
properties ,as per guide line of FDA and USDA as well as damage
from chemical reaction after making the surface free from dust, oil
and moisture etc. all complete as per instruction and to the
satisfaction of ElC. [ This item will be operated on prior permission from the concerned SE/Dy Chief Engineer] | 10.17 | SQUARE METER | 802 | ₹8,159.23 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.98 MB
BOQ_2547578.xls
BOQ • 0.28 MB
TD.pdf
Tender Documents • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .