Construction of building for Vanniyampathy (Washermenpet) Fire and Rescue Service Station at North Chennai District under CM Announcement scheme for the year 2021-22

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

7.2) Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with Excavated Earth

21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3) S&F of Magnetic door catches

25) M.S.Holdfast

30) Ellispattern

31) Weathering course

37.1) White washing 3 coats (slaked)

39) M.s Grills

40) Painting - New "wood work"

41) Painting - New "iron work"

46) S & F 20 mm dia Alu. Hanger Rod

47) S & F Alu Towel rail 75 cm long

48) S & F 5 pin Coat stand

49) S & F chromium plated 8 guage Picture Hook

50.3) Supply and planting avenue trees

50.4) Providing Tree guard

52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

53.3) C.I. Steps ( 5 kg)

Electrical arrangements 72) Box type Fibre Fan hook

73.1) 6 way - D.B.

73.2) 4 way - D.B.

74) Charges for fixing of "Fan"

76) 8 SWG wire

77.3) S&F of TV/Telephone line Socket

77.4) S&F of 20mm dia PVC pipe for TV/Telephone line

78) Earthing Station IS3043 (Type I)

86) Anti termite treatment

112) S & F of Exsaust Fan 300 mm dia

238) Anticorrosive treatment for steel grills

Annexure 2.1.1) Filling C.S. sand

2.15) Supplying and filling stone dust

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.1) P.C.C. 1:2:4 for Foundation & Basement and other similar works

6.2.3) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

8.2.3.2) Standardised concrete Mix using M30 Grade Concrete a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third floor

f. In fourth floor

g. In fifth floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor/Stilt floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

f. In Fifth floor

10.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) b. In Ground Floor/stilt floor

c. In First Floor

d. In Second Floor

e. In Third Floor

f. In Fourth Floor

11.2.2) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

15.4.1) Cuddappa slab 20 mm tk.for C/B slab. a. Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

15.5.1) Cuddappa slab 40 mm tk.for C/B slab. a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

18.1) Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

f.Curved surface

18.9) Double centering

21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame

21.5.6.1) Supplying and fixing of solid core flush door shutter of thickness 35mm a). Door size 1.000 m x 2.100 (Single Leaf)

b). Door size 0.900 m x 2.100 (Single Leaf)

21.6.1.4) R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using M30 grade ( with out vibrating charges) a. 900 x 2100 mm

22.3.3) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

22.3.9.1) T.W. frame & TW styles & rails with BWR double leaf shutters for SPECIAL cup board/ ward robes including two coat enamel paint & one coat primer.

26.1) Flooring in C.C.1:5:10

28.1) Floor plastering in C.M. 1:4, 20 mm tk.

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound

33.2) Plastering in C.M. 1:5, 12 mm tk.

34.2) Plastering in C.M. 1:4, 12 mm tk.

35.3) Spl. Ceiling plastering in C.M. 1:3, 10 mm tk.

36.1) Cement mortar Border in C.M. 1:5, 12 mm tk. a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

43.2.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.(BINDING WIRE insulated with PVC)

44.2.1.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M30)

b) Augering 30cm dia

44.5.3.1) Providing Rain Water Harvesting well ring circular shape of 90cm dia, 60cm depth,50mm thick using M30 grade concrete including steel fabrication.

44.6.1) PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe(UPVC SPECIAL CLAMP )

45.2) Providing Colour Marble chips of size 10mm and below using 72Kgs of cement and 0.15 cum of Colour Marble chips for every 10 sqm over the existing plastered surface

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm

50.5.1) Supplying. Fabricating and erection of M.S Scheme Name board

52.1.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials a. 32 mm dia

b. 25 mm dia

52.2.1) Supplying, laying & jointing the following UPVC pipes as per D 1785 of schedule 40 with UPVC Specials d).40 mm dia UPVC pipes (Above GL)

52.2.2) Supplying, laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials d).40 mm dia UPVC pipes (below GL)

52.4.1) c. 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

52.9) Supplying and fixing of following materials of best approved quality for erection of submersible pumpset etc., e. M.S clamp set 40mm dia

53.4) S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5) Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.2) S & F of 15mm dia Engineering Polymer Tap (long body )

54.2.2) S & F of 15mm dia Engineering Polymer Tap short body tap

56.4.2) S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.1) S & F of E.W.C.(White) 500 mm with PVC SWR grade.

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1) Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm

60.1) PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1) PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

62.2.1) PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

b. 160 mm dia PVC Equal tee

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.( PVC Box , Fire Retarded Box) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(PVC Electrical Box )

66.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Bo )

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS:694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box )

68.3.2) Wiring for lift well light point and socket outlet with 2 x 1.5 sqmm FRLS PVC insulated stranded copper conductor of 1100V grade along with 1 x 1.5 sqmm FRLS PVC insulated stranded copper conductor cable

69.2) Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.7) Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

78.4) Earthing as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe

80.2) 450 x 375 x 20 mm thick TW plank

82.3) Supply and fixing of LED road way lightiing luminaries b) 30W LED

84.3) Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.1) Supplying and delivery of Three phase ELCB/RCCB

93.1.1) Plastering with CM 1:3, 12mm with WPC

96.2.7) Supply and Laying Rubber Moulded Hydraulic Pressed Paver Block 83 mm thick including labour charges for laying.

98.5.1) TW double leaves shutter of size with brass fittings a.1200 x 2100mm (double leaves door)

105.3) Run of 4 Wires of 6 sqmm PVC insulated single core multi strand

107.3) Run of 4 Wires of 10 sqmm PVC insulated single core multi strand

144.2.1) Supplying and fixing of 250 Watts Metal halide Flood light etc.,

156.2) Supply and fixing of 125 amps capacity floor mounting panel board (cubical type)

171.1.2) Labour charges for the erection of submersible pumpset in borewell/ openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth. Upto 5HP

171.2.8) Supply and Delivery of borewell Submersible motor Pumpset with ISI mark IS 8034 without Panel Board of capacity 50LPM X 100m head (Three phase)

171.2.9) Supply and Delivery of Three phase Openwell Submersible motor Pumpset 100LPM X 50m

175.1.2) Supply and fixing of triple pole and neutral four way 7 segment 3 tier compartmental type MCB distribution board

175.2.3) S&F TPN 4 way DB

180.1.1) Providing and fixing 25mm x 3mm copper strip on surface or in recess for connections as required

180.1.2) Providing and fixing 25mm x 6mm copper strip on surface or in recess for connections as required for alternator neutral

180.1.4) Supply and run of 2 of No.8 copper wire for earth connections

184.2.2) Supply and fixing of 2 x 2' 4000K square type recessed / surface mounted fitting with 36 W LED bulbs and with necessary connection (higher end))

184.2.3) Supply and fixing of 75 W mid bay LED luminaire on the main portico with necessary internal connections. (The type of luminaire shall be got approved from the Executive Engineer)

207.3.1) Providing two coats of Plastic Emulsion PAINT including primer for inner walls

207.3.8) Providing two coats of Exterior Emulsion PAINT including primer for outer walls

213) S & F of SFRC Manhole cover b) 750 x 750mm

238.1) Anticorrosive treatment for window grills

255.6.2) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

255.7.2) Supply and fixing of LED bulb. a. 9W LED bulb

b. 12W LED bulb

344.2) S&F of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.2) Concrete designer tiles flooring

361.6) Vitrified Tiles ( Ivory ) 600 x 600 x 8mm Flooring in C.M 1:3

365.1) Supplying & fixing of Stainless steel Hand Rails for Staircase

367.1) Providing wooden Melamine polish for new wood work

379.7.1.1) Supply and Fixing of PVC Trim (beeding)

379.8.2.3) Supplying and laying of 10mm thicj Ruby red Granite tiles Flooring in CM 1:3, 20mm tk

379.8.7.1) Granite Tile wall cladding using 10mmtk (Ruby red) tile in C.M 1:2, 10mm tk .

450) Supplying and fixing of 160mm dia PVC end cap for borewell of best approved quality

450.9.2) Supplying and fixing of CP shower arm with overhead shower rose

451.1) Supplying and fixing of 15mm dia stop cock

451.2) Supplying and fixing of angle cock

451.4) Supply and fixing of Bibcock with Health faucet approved quality with ISI mark

504) Supplying and delivery of 12 mm thick nylon rope

513.1) Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe

532.2) Providing one coat of Wallputty for new plastered surface

540.1.6.2) Supply & Installtion of 3 star rated Air- Conditioner with copper coil including cost of 3m copper tube and fixing charge etc b. 1.5 TR Split Type AC unit

540.1.8.1) Supply and fixing of AC drain pipe

540.1.9.2) Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay

540.2.1) Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metrs supplied with AC unit)

609.6.1) Supply and delivery of 150mm OD PVC casing pipes (6kg/cm2) as per IS 12818/1992 of approved quality for borewells

609.6.2) Supply and delivery of 150mm OD PVC Ribbed screen pipes (6kg/cm2) as per IS 12818/1992 of approved quality for borewells

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) a) 150mm dia PVC casing pipes assembly.

615.3.2) Supplying, delivery and fixing of MS fabricated DOL panel control board with ISI mark for three phase a) 4 HP

615.3.5) Supplying, delivery and fixing of 1.5 HP MS Fabricated DOL panel control board with ISI Mark for single phase

616.4.3) Supplying and fixing the following dia HDPE pipes of approved make a. 40 mm dia HDPE 10 Kg/cm2 pipe

619) Supplying and fixing of following plumbing fittings / specials confirming to I.S Specifications a. 50 mm dia GM non return valve

707.3.2) Supplying and laying 3 core 4 sqmm flat type copper cable with ISI mark including cost of all materials and specials.

724.5) Supply and clamping of following PVC armoured LTUG cable (Above Ground level) a) 3.5C x 120 Sqmm PVC armoured LTUG cable

b) 3.5C x 70 Sqmm PVC armoured LTUG cable

c) 4C x 16 Sqmm PVC armoured LTUG cable

724.6) Supplying and laying of following size PVC armoured LTUG cable (Below Ground level) b) 3.5C x 70 Sqmm PVC armoured LTUG cable

724.7) Supplying and fixing of brass cable gland suitable for a) 3.5 x 120 sqmm PVC armoured LTUG cable

b) 3.5C x 70 Sqmm PVC armoured LTUG cable

724.8) Supplying and fixing of cable end termination suitable for a) 3.5 x 120 sqmm PVC armoured LTUG cable

b) 3.5C x 70 Sqmm PVC armoured LTUG cable

741.8) Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in Flush with wall with earth connection ( For AC Plug ) Legrand ( MDS) / Hager( L& T) Equivalent/ Superior variety

799.1.1) Drilling of 150mm dia borewell anywhere including transportation from one place to another place in alluvial soil or sedimentary starta mud circulation method a) Drilling of borewell in upto 60m

799.2.1) Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officers. a) Reaming of borewell in upto 60m

799.3.1) Charges for developing the borewell for the entire depth with air compressor of 300cfm capacity [Minimum 8 hours]

828.3) Supply and laying of Hard core layer 200mm

832.5.2) Supplying and fixing in position of UPVC window of casement type( open) for all sizes

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

943.6) Supply and installation of CO2 type fire extinguishers,wall mounting type, cylindrical in shape, with discharge horn. Capacity 2 kgs. ISI Marked

943.7) Supply and Installation of ABC type Fire Extinguishers, cylindrical in shape, wall mounting type, with initial charge, and discharge nozzle, capacity 6 Kgs. ISI marked.

958) Design, Supply, Delivery, Installation,Testing, and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 13 Persons (Gearless lift without machine room)

960.2) Providing suitable foundation for accomodating the 62.5 KVA DG set.

960.3) Supply, installation, testing and commissioning of 62.5 KVA Diesel Generator set

960.3.1) Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets)

960.3.2) Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator.

960.3.3) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m

960.3.4) Supply and installation of MS exhaust pipe of suitable thickness with 125 mm dia complete with MS wall / ceiling support, etc.

960.3.5) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool

960.3.6) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe

960.3.7) Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval

960.4.5.1) Supply and fixing of 4' 18 watts LED Tube Light

961) Supply and fixing of Aluminium TNPHC Emblem of 18" height

961.1) Supplying and fixing of following height aluminium letters a) 12" height aluminium letters

b) 9" height Aluminium letters

961.2) Supply and fixing of plastic foam name plate with vinyl cutting letter with approved colours etc., complete as directed by the departmental officers a) 20"x 5"

Unic Associates

P GANGADARAN

Bidder Name

Unic Associates

P GANGADARAN

EEE PEE S AND CO