REPAIRS TO MES INSTALLATION PUMP HOUSE TO CERTAIN BUILDINGS AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion: - Material and labour for preparation of plastered or unplastered surfaces of wall including cornies, pillasters by brooming down or steel wire smoke, root moulds, moss and efflorescent salt and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and as directed.

Description all as per Ser item No 1.00 here-in-before but one coat of white wash on ceiling complete all as specified and as directed.

Description all as per Ser item No 1.00 here-in-before but one coat of Oil bound distemper complete all as specified and as directed.

Description all as per Ser item No 1.00 here-in-before but applying one coat of cement based paint complete all as specified and as directed.

Material and labour for preparation of old surfaces and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed.

Taking down cement plaster of any description on bricks or stone walls or from concrete surfaces including racking out joints, hacking for key, scrubbing complete all as specified and directed.

Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick surfaces finished even and smooth without using extra cement complete all as specified and as directed. (including all necessary scaffolding, lifting arrangement for external surfaces).

Material and labour for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing plastered new surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour for applying two coats of cement based paint including preparation of new plastered surfaces including one coat of primer complete all as specified and as directed.

Material and labour for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.

Material and labour for preparation of new plastered wall surfaces and applying two coats of weather proof exterior emulsion paint over one coat of primer after making surfaces even and smooth, including any colour upto 12 metre height complete all as specified and directed, color as approved by Engineer-in-Charge.

Material and labour for preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down or steel wire smoke, root moulds, moss and efflorescent salt and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying two coats of weather proof exterior emulsion paint, over one coat of primer after making surfaces even and smooth including any colour, chajjas and fascias complete all as specified and as directed. (All scaffolding arrangement up to three storey building).

Material and labour for complete removal of vegetations, roots and shrubs from wall and making good the wall with cement, brick work and plastering including all scaffolding up to 4 storey building complete all as specified and as directed.

Demolition of brick or stone / boulders masonary, built in cement mortar including all quoins, arches, pillars etc, excluding ashlar facing dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified and as directed.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar (1:4) etc complete all as specified and as directed.

Description all as per Ser item No 18.00 here-in-before but except stone complete all as specified and as directed.

Material and labour for flush pointing to block course or ashlar masonary or concrete block walling in cement mortar (1:4) etc complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping, finishing, throating etc complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) embedded in concrete, brick work, masonry, etc any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh, barbed wire any type complete all as specified and as directed.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 cm long dia of shank diameter of neck in 5 to 10 mm complete all as specified and as directed.

Material and labour for hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe-290 Grade E-165 complete all as specified and as directed.

Supply and fixing in repairs galvanised, two stranded, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (Each line wire to be measured).

Material and labour for mild steel round bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply only mild steel galvanised chain link fencing having main wires of dia 5.3mm and cross wires of dia 3.6mm and oblong mesh size 100 x 150mm fixed to any type of straps, standards complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft / loose soil each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.

Material and labour for cement concrete in foundations, filling and mass concrete (1:4:8), type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4 Sqm each and removing from site all as specified and as directed.

Description all as per item No 32.00 here-in-before but not exceeding 1.5 m each complete all as specified and as directed.

Taking down shutters from the frame of any description exceeding 1 Sqm but not exceeding 2 Sqm each leaf and removing from site all as specified and as directed.

Material and labour for cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) filling in, pressed steel chowkhats, bed block for holdfast and the like complete all as specified and as directed.

Supply and fixing 35mm thick second class hard wood panelled shutter plain, framed with panels of timber flat on both sides supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing 35 mm thick second class hard wood glazed and skelton shutters sizes of members as specified in SSR (Part-I) clause 8.24 (a), open, rebated and prepared to receive glass or gauge (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauge etc all as specified and as directed.

Supply and fixing pressed steel frames of size 105 X 60mm made of 1.25 mm thick mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete and fixed all as specified and as directed. Note: - PCC for filling of hollow portion shall be measured and paid for separately.

Supply and fixing pressed steel frames of size 125 X 60mm made of 1.25 mm thick mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete and fixed all as specified and as directed. Note: - PCC for filling of hollow portion shall be measured and paid for separately.

Supply and fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube supplying, fixing in opening as per specification and drawing as in door complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplied and fitted in the frame at site as per specification and drawing shown in SSR Part-II complete all as specified and as directed.

Supply and fixing in repairs box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick mild steel sheet tube factory made with double side shutters wire gauged shutter and glass glazed shutter with side hung shutters with mild steel handles and mild steel peg stay dovetailed or welded including 02 No's, mild steel tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on drawing welded to mild steel flat iron frame work, including other fittings, hinges, mild steel handles, tarred hold fasts, PCC blocks for hold fasts etc all as shown on drawing No CEPZ/TD-354/09 sheet 1/3 to 3/3 including one coat of red oxide zinc primer. The following items shall also be included in quoted rate of this item: - (a) 3 mm thick sheet glass ordinary quality and glazing with oil putty in square. (b) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts 150 mm size and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts 200 mm size and fixed complete all as specified and as directed.

Supply and fixing 150 mm aluminium handle cast type complete all as specified and as directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

Supply and fixing in repairs butt hinges 100 mm long, stainless steel, medium weight and fixed complete all as specified and as directed.

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate fixed / welded to door frame complete all as specified and as directed.

Material and labour for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Hacking out old broken glass panes (any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.5 Sqm each pane complete all as specified and as directed.

Description all as per Ser item No. 53.00 here-in-before but figured glass, pin head type complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for vitrified light shade ceramic tiles 10mm thick (square / rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for vitrified light shade ceramic tiles 10mm thick (square / rectangular) polished area of each tile not exceeding 0.36 Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar (1:4) complete all as specified and as directed.

Material and labour for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar (1:3) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size 450mm x 300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for machine cut Kota stone slab flooring not less than 19mm thick (size of stone shall not be less than 55cm x 55cm), 75mm wide white marble border allround, laid over and including 20 mm thick screed base in cement mortar (1:6), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine complete all as specified and as directed.

Material and labour for machine cut Kota stone slab not less than 19mm thick as in riser of steps, skirting, dado and pillar laid over and cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine complete all as specified and as directed.

Demolition of cement concrete in ground floor any thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 75 mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair complete all as specified and directed.

Material and labour for 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in floor as sub base complete all as specified and directed.

Material and labour for chequered tiles of size 300 x 300 x 25 mm thick, screed bed or bedding layer of mortar 15mm thick for finishes in cement mortar (1:4) set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size / shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-0 (using 20 mm graded crushed stone aggregate) as in getting proper slope / covering complete all as specified and as directed. (average thickness 50mm).

Demolition of RCC of any description and in any position not otherwise specifically provided for and removing the debris complete all as specified and as directed. (reinforcement cut as required to facilitate demolition).

Material and labour for precast RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) in cover slabs of open drains including of formwork and set in cement mortar (1:4) complete all as specified and as directed.

Material and labour for TMT bars of 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed.

Supply and fixing in repairs cast copper chromium plated concealed stop cock screwed down high pressure capstan head with chromium plated flange suitable for 15mm bore pipe marked with hot or cold in the head complete including dismantling of tiles / any surface finishes and making good complete all as specified and as directed.

Supply and fixing in repairs 15mm bore pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks three layers of 500 litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I including 20mm thick Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 grams) including dismantling of old broken water tanks and refixing of inlet, outlet and overflow pipe etc complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks three layers of 1000 litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I including 20mm thick Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 grams) including dismantling of old broken water tanks and refixing of inlet, outlet and overflow pipe etc complete all as specified and as directed.

Supply and fixing in repair vitreous china squatting pan Orrissa pattern, long pan, size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) but including provision of lime concrete complete all as specified and as directed.

Supply and fixing in repair vitreous china washdown water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing in repairs PVC low level flushing cistern 10 litres capacity white with inlet, ball valve, float valve and handle including brackets, PVC flush pipe complete all as specified and as directed.

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 450mm complete all as specified and as directed.

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 600mm complete all as specified and as directed.

Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550 x 400 mm excluding tap but including brackets fixing to wall and two No's 10mm dia 100mm long nut and bolt over brackets and chromium plated waste coupling complete all as specified and as directed.

Supply and fixing in repairs towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden / Plastic cleats (Minimum weight 190 gram) complete all as specified and as directed.

Supply and fixing in repairs Bib tap 15mm bore standard PTMT, any colour high pressure screwed for iron pipes and fixed complete all as specified and as directed.

Taking up or down galvanised iron tubing 15mm bore including removal to store complete all as specified and as directed.

Taking up or down galvanised iron tubing 20mm bore including removal to store complete all as specified and as directed.

Supply and fixing steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

Refixing old steel tubing 15 mm bore and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and as directed.

Supply and fixing steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

Refixing old steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and as directed.

Supply and fixing in repairs 100 mm dia chromium plated steel grating with or without waste hole complete all as specified and as directed.

Supply and fixing in repairs 125 mm chromium plated stainless steel grating with or without waste hole complete all as specified and as directed.

Taking down eaves, gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.

Supply and fixing 50 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kg / cm² laid in trenches complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.

Supply and fixing PVC (SWR) bends 110 mm radius complete all as specified and as directed.

Supply and fixing 110 mm PVC (SWR) junction single (T) equal / unequal complete all as specified and as directed.

Supply and fixing PVC (SWR) bends / shoes any radius of 75 mm dia complete all as specified and as directed.

Supply and fixing PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and as directed.

Supply and fixing PVC (SWR) bends any radius provided with access door of 75mm dia complete all as specified and as directed.

Taking down rolling shutters of sizes, area not exceeding 8 Sqm each, replacing worn out / unserviceable parts with new ones, overhauling, applying grease / oil, refixing in position and making functional complete all as specified and as directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Taking down rolling shutters of sizes, area exceeding 8 Sqm but not exceeding 12 Sqm each, replacing worn out / unserviceable parts with new ones, overhauling, applying grease / oil, refixing in position and making functional complete all as specified and as directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Taking down rolling shutters of sizes, area exceeding 12 Sqm but not exceeding 20 Sqm each, replacing worn out / unserviceable parts with new ones, overhauling, applying grease / oil, refixing in position and making functional complete all as specified and as directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Taking down rolling shutters of sizes, area exceeding 20 Sqm but not exceeding 26 Sqm each, replacing worn out / unserviceable parts with new ones, overhauling, applying grease / oil, refixing in position and making functional complete all as specified and as directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Material and labour for overhauling of rolling shutter of area not exceeding 8 Sqm (without taking down from position but by opening hood cover), applying grease for trouble free operation, refixing the hood cover in position and making functional complete all as specified and directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Material and labour for overhauling of rolling shutter of area exceeding 8 Sqm but not exceeding 12 Sqm each (without taking down from position but by opening hood cover), applying grease for trouble free operation, refixing the hood cover in position and making functional complete all as specified and directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Material and labour for overhauling of rolling shutter of area exceeding 12 Sqm but not exceeding 20 Sqm each (without taking down from position but by opening hood cover), applying grease for trouble free operation, refixing the hood cover in position and making functional complete all as specified and directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Material and labour for overhauling of rolling shutter of area exceeding 20 Sqm but not exceeding 26 Sqm each (without taking down from position but by opening hood cover), applying grease for trouble free operation, refixing the hood cover in position and making functional complete all as specified and directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Supply and fixing in repairs mild steel worn wheel and gear wheel fitted to suspension shaft of the rolling shutter and connecting rod respectively all as specified and directed. Note: - Suspension shaft and connecting rod will be measured and paid for separately.

Supply and fixing in repairs mild steel sheet 1.00mm thick as in hood cover of any shape with flat iron stiffeners at both edges and fixed to the bracket plate complete all as specified and as directed. Note: - Stiffeners will be measured and paid for separately.

Supply and fixing in repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Supply and fixing in repairs mild steel guide channel of size 65mm depth, 25mm width and 3.15mm thick including fixing of cleats or supports (not exceeding 750mm centre to centre) for attachment to the wall or column by means of bolts or screws all as specified and directed.

Supply and fixing in repairs 25mm dia mild steel connecting rod fitted to gear wheel and bevel gear complete all as specified and directed.

Supply and fixing in repairs lath section made from cold rolled steel strips 1.20 mm thick with interlocking curls at both edges and a deep corrugation at the centre with a bridge depth of not less than 12 mm and each lath section shall be continous single piece without any welding joint complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

E/M Portion: - Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and in any type of switch board wooden / iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 3 run 6 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour for point wiring one light point or one fan point controlled by one switch complete with 1.50 Sqmm copper conductor multistranded PVC insulated FRLS and unsheathed cable in existing PVC rigid concealed conduit with new cast iron / pressed steel sunk terminal box covered with 3 mm thick laminated sheet hylam brand IS-2036 marked with continuous PVC insulated multistranded copper wire 1.50 Sqmm dia FRLS PVC insulated complete all as specified and as directed.

Description all as per Ser item No 119.00 here-in-before but for multi 5 pin 5 amp socket outlet on same board complete all as specified and as directed.

Description all as per Ser item No 119.00 here-in-before but for multi 3 pin socket outlet 5 amp socket on independent board complete all as specified and as directed.

Description all as per Ser item No 119.00 here-in-before but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20 / 25 mm dia and unsheathed copper conductor multistranded cable 2.5 Sqmm as earth wire FRLS PVC insulated in green color complete with new cast iron / pressed steel sunken black with hylum top sheet cover complete all as specified and as directed.

Supply and fixing in replacement of existing boxes with modular metal flush box ½ module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement of existing boxes with modular metal flush box 4 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement of existing boxes with modular metal flush box 8 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement of modular white cover plate with frame 1 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement of modular white cover plate with frame 2 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement of modular white cover plate with frame 4 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement of modular white cover plate with frame 8 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement of modular switch 1 way 6 A, 1 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement of modular socket, 6A - 6 pin combined 3 module complete all as specified and directed.

Supply and fixing in replacement of modular switch socket combination 16 A, 6 pin, 3 module complete all as specified and as directed.

Supply and fixing in replacement of ceiling rose, 3 Phase / PVC / polycarbonate isolated body complete all as specified and as directed.

Supply and fixing in replacement of modular fan step regulator, 120 W, 1 module, 240 volts ISI marked complete all as specified and directed.

Material and labour in replacement for lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Material and labour in replacement of self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Supply and fixing in replacement of LED lights fitting 1 x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

Supply and fixing in replacement of LED light fitting 1 x 9 W / 1 X 10 W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Material and labour for replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing in replacement of SPN 40 amp to 63 Amp rating 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor > 0.95, 100 lumen/watt, CCT min 5700K complete all as specified and as directed.

Supply and fixing in replacement of Acrylic customizable LED message signage boards of 1.2m x 0.4m size with message written in capital letters on it complete all as specified and as directed.

Material and labour in repair for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 metre deep below normal ground level with top edge of the earth plate not less than 1.5 metre below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 pre-cast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed.

M/S RAVINDER SINGH

M/S VED PAUL MAHAJAN

M/S Sukhmani Construction Co.

M/S ANIL MAHAJAN

M/S TRIKUTA BUILDERS