CIVIL REPAIR AND RENOVATION INCLUDING REPLACEMENT OF PUBLIC HEALTH FIXTURES OF 40 Nos. SEATS AND TWO STORE ROOM OF CT BLOCKS, NEAR GOVT. SCHOOL H.M AND NEAR ROUND ABOUT AT R.D. CHD

Manufacturing, fabrication and fixing of MS doors size 6’-0” x 3’-0” made out of MS sheet having gauge of 1 mm thick , MS angle MS sheet, MS flat, Hold fast, Kundi, handle, hinges, electric rods charges, gen set, charges, welding and finishing with good quality paint ( Two coats) Complete in all respects. (NS)

Repair of MS doors of size 6'-0" x 3'-0" including the cost of cutting welding complete in all respect as per satisfaction of EIC. (NS)

Providing and fixing of MS Hardware Kundi, handle, hinges, kabza including cost of nut bots and electric rods charges, generator set charges, welding and finishing with good quality paint (Two coats) complete in all respects. (NS)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) (As per DSR I. No. 14.1.2)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (As per DSR I. No. 15.2.1)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (As per DSR I. No.2.8.1)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (As per DSR I. No. 15.60)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) :10 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) ) (As per DSR I. No. 4.1.10A)

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) (As per DSR I. No. 4.1.4)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (As per DSR I. No. 6.1.1)

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm (As per DSR I. No. 14.80.2)

Providing and fixing Grab rail of stainless steel pipe 1" dia. chrome platted stainless steel grab rail at Height of 2'-6" with minimum 2" clearance and fitting of grade AISI 304 as per JIS standard 3448 including fitting and fixing of pipe with clamps at 1.00 m spacing including cutting and making good the walls complete as per direction of Engineer-in-charge. (NS)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR I. No. 17.2.1)

Providing and replacement of PVC Tee/oblique in 110mm i/d (Diplast/prince kisan/supreme make) and cost of solvent salutation etc complete in all respects. (NS)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (As per DSR I. No. 17.7.3)

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122 mm long, weighing not less than 99 gms (As per DSR I. No. 18.54.2)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe. 40 mm dia (As per DSR I. No. 17.28.2.2)

Providing and fixing PTMT grating of approved quality and colour. Circular type. 125 mm nominal dia with 25 mm waste hole (As per DSR I. No. 18.58.1.2)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm (DSR I. No. 17.32.2)

Providing and fixing of PVC pipe including specials labour for fixing trenching refilling PVC solvent and testing as per satisfaction of EIC. 110 mm dia. PVC pipe. Make: PRINCE/DIPLAST/SUPREME/ JINDAL (NS)

Providing and fixing of PVC pipe including specials labour for fixing trenching refilling PVC solvent and testing as per satisfaction of EIC. 2’’ dia. PVC pipe. Make: PRINCE/DIPLAST/SUPREME/JINDAL (NS)

Plastic Mug (1.5 litre)(milton) Cello, polyset (NS)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes. (DSR I. No. 18.7.2)

25 mm nominal dia Pipes (DSR I. No. 18.7.3)

Providing and fixing PTMT, push cock of approved quality and colour. (DSR I. No. 18.57.1)

Providing and fixing gate valve made PTMT/ CPVC or other equal brand for water tank of approved quality and colour. (NS)

Providing and fixing union made PTMT/ CPVC or other equal brandfor water tank of approved quality and colour. (NS)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore (DSR I. No. 18.18.2)

Repair of damaged existing Constructing brick masonary chamber for under ground C.I. inspection chamber including repair of damaged bricks, chamber walls , benching and cleaning of inspection chamber complete in all respects as per satisfaction of EIC. (NS)

C.I. cover and frame 300x300 mm inside (NS)

C.I. cover without frame 300x300 mm inside weight not less than 4.50 kg (NS)

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality M D - 10 Square shape 450 mm internal dimension (DSR I. No. 19.19.2.1)

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter (As per DSR I. No. 19.21.1)

Providing and fixing 40 watt Solar LED flood light with bracket outside on the wall complete (Make : Graptom,Luxmi Solar) (NS)

Providing and fixing of LED bulb (9 Watt) including the cost of holder complete in all respect with entire satisfaction of EIC (Philips/Hevells) (NS)

PVC insulated copper conductor single core FRLS Cable ISI Marked overall 1.5 sqmm,1100 volts garde (NS)

Supply and Erection of PVC pipe heavy Duty & HDPE pipe HD (fire Retardant) for wiring process including bends, inspection boxes etcHDPE Electrical conduit pipe 20mm dia (ISI marked) flushed (make Diplast, Suprem, polydet) (NS)

Supplying and fixing following size/ modules, GI /PVC box alongwith modular base & cover plate for modular switches in recess etc.as required. 1.27.4 6 Module (200mmX75mm) (Elect. DSR I. No. 1.23.1)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Elect. DSR I. No. 1.23.1E)

1.24.1 5/6 A switch

1.24.3 15/16 A switch

1.24.4 3 pin 5/6 A socket outlet

1.24.5 6 pin 15/16 A socket outlet

Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire (As per DSR I. No. 16.17.1)

Supplying at site : R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6 mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). (As per DSR I. No. 16.15.1)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (As per DSR I. No. 10.25.2)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping , sand papering and preparing the surface smooth including necessary repairs to starches. (NS)

Factory made 50mmx47 mm with a wall thickness of 5 mm door frame PVC extruded sheet including carriage. Two or more coats on new work (As per DSR I. No. 13.61.1)

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (As per DSR I. No. 13.80)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (As per DSR I. No. 13.46.1)

Writing of slogan and making drawing/images regarding promotion of Swatch Bharat Abhiyan etc. including cost of 1 quality paint, brush, labour etc. Complete in all respects as per direction of EC. (NS)

Proving and fixing of Laminated Sun Sign Board Material for indication of various sign board in Toilet Block of Sizes: (NS)

36”X30”(Toilet ID Board)

12”X12”(MALE/FEMALE),Differently abled, Child Friendly

8”X12”(Google Map), (Sanitary Napkin Machine), QR Code

12’’X8”(No Smoking) (Transgender)

Providing and fixing of aluminum 10 mm 2 core make Shalimar /havells complete in all respects. (NS)

Repair of damaged exiting construction water tank size more than 6’X6’ approximately including repair of damaged brick and cleaning etc completed in all respects as per direction Of EIC. (NS)

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore (As per DSR I. No. 18.11.2)

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore (As per DSR I. No. 18.46.3)

Garbage Large Dust bin (plastic) 48liters (Make Diplast, Aristo) cello (NSI)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe (As per DSR I. No. 19.3.2)

Providing and fixing Crompton greaves and other equal brand 1 HP water Pump with help of fastners to be fixed at side as per direction of Engineer-in-charge. (NS)

Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil. Pipes, cables etc, not exceeding 80 mm dia. (As per DSR I. No. 2.10.1.1)

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required. 2.23.1 For 6 way, Double door SPN MCBD (Elect. DSR I. No. 2.23)

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. (DSR I. No. 2.25A)

Providing and fixing M. S. sheetFrame Size 18”X19” with M.S angle , fasteners with the help of mason, labor& electric cutter including welding set with welding rods , gen set, welding and finishing with good quality paint ( Two coats) Complete in all respects. (NS)

Credit against old material. (NS)

Please Enable Macros to View BoQ information