WBPHED/07_01/AE-III/CMD/24-25

Amount

Supply and delivery at site of vertical submersible pumping machinery directly coupled with wet winding type suitable size submersible motor with following specification: Pump : Discharge (Q) : 27mᶟ/Hr., Head (H) : 51 mtrs. Method of starting : DOL, Shaft-stainless steel, Impeller- S.S / GM, Outlet - 38/65/80 mm dia Motor : Operating Voltage : 415 (± 10 %), Phase : 3ph, 50 Hz ± 6% Speed : 2900 RPM, Method of starting : S/D Make : KSB / Grundfos / Texmo / CRI / KBL / MBH / or any approved vendor. ( N.B : Manufacturer's test certificate along with charecteristics curve and gurantee certyificate have to be submitted at the time of delivery.)

Supply delivery at site of 4sqmm 3 core 1.1 KV Grade flat submersible copper conductor cable . (Make:- Finolex / Gloster / Polycab / Mescab / or any Approved Vendor list of PHED.)

Supply & delivery at site of 10 mm² x 3 core size Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC. (Make:- Gloster / Polycab / Mescab / or any Approved Vendor list of PHED.)

Supply & delivery of 63 Amps re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC600947-1&3). (Make: Approved Vendor list of PHED.)

Supply & delivery of Three Phase Submersible Pump Controllers (with Single Phase Preventer) for Submersible Pump with Realy Range (13-21)A. Coil voltage - 415V, [Model - DOL, (With Wideband Coil)], (Make-L&T/PHE dte approved make)

3mtr long 50mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

1.5 mtr long 50mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

50mm dia. CI Top & Bottom adopter.

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.

Heavy type 300mm dia./suitable Split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design.

Anti snapping safety device for pump set by supplying suitable size of MS angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials.

Installation of Submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover and specials of above with protection pipe and supply of MS clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of all actuator cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of EIC. This including the cost for installation of main switch on wall after necessary power cable connection after laying of cable on wall with using saddles and Commissioning of the whole installation and testing as per instruction of EIC.

Add: GST @ 18% on sum of Item No: 1 to 12

Add Cess @1% on sum of Item No. 13

SUNIL RABIDAS (BID ID -5707013)

Massk Engineering Works (BID ID -5707098)