Rewinding of Motor Pump sets and its allied works for Water Treatment Plant for Daman District at Dabhel, Magarwad, Dunetha and Bamanpuja Checkdam for the period of 02 Years. (E-47545)

Items

Rewinding of Horizontal type submersible motor pump set by using ISI marked finolex or equivalent approved make PVC insulated Water Proof Copper winding wires of suitable size comp. with connection for following. Incl. transportation i.e. from site to workshop & vice versa & loading unloading charges etc. complete also including all taxes & GST directed by Engineer incharge. (a) 30 HP Three phase 440 V.

Replacement of the accessories of std make suitable for Horizontal type submersible motor pump set 30HP incl. turning, welding, cutting, transportation, loading unloading charges etc.complete also including all taxes & GST directed by Engineer incharge. (a) Thrust bearing set (bronze/carbon).

(b) Centre bearing.

(c) Bush Set (Motor) (Bronze/LB)

(d) C.I. Impeller.

(e) Mech. Seal.

Rewinding of Polder / Oil fill sewage type motor pump set by using ISI marked finolex or equivalent approved make PVC insulated Water Proof Copper winding wires of suitable size comp. with connection for following. Incl. transportation i.e. from site to workshop & vice versa & loading unloading charges etc.complete also including all taxes & GST directed by Engineer incharge. (a) 40 HP Three Phase 440 V. (Calama / MBH / Kirloskar)

Rewinding of Induction type motor by using super enamelled copper wire and putting the same in working condition as per original incl. transportation i.e. from site to workshop & vice versa & loading unloading charges etc. complete also including all taxes & GST directed by Engineer incharge. (a) 10 HP.

Replacement of accessories suitable for Polder / Oil fill type pump 40 HP calama / MBH / Kirloskar make incl. tunning, welding, cutting, loading unloading charges etc. complete also including all taxes & GST directed by Engineer incharge. (1) Thrust bearing.

(2) Mechanical seal / Oil seal.

(3) Impeller.

(4) Brg. Bush for suction housing.

(5) Brg. Bush upper / lower.

(6) Rotor sleeve inner.

(7) Rotor sleeve outer.

(8) T.B. Block / Centre bearing.

(9) Lock nut for impeller.

(10) ‘O’ Ring.

(11) Rubber gasket.

(12) Stud for diffuser / flange.

(13) Lock nut for T.B. Block.

(14) Mechanical Water Seal (Kirloskar).

(15) Winding Oil.

(16) Cable water proof joint incl. copper ferul & ringlux

(17) Raller Bearing

(18) Ball Bearing

Charges for lifting & lowering Polder pump submersible motor pumpset 40 / 50 / 100 HP with M.S. Pipe line of 200 mm, casing pipe and pipe clamp etc. from intake well / sump / pond. Incl. transportation i.e. from site to workshop & vice versa, loading unloading charges etc. complete also including all taxes & GST directed by Engineer incharge.

Labour charges for repairing the following capacity motor pumpset electrical starter panel i.e. wiring, replacing of power contactor, relay and necessary wires and putting the starter in working condition etc.complete also including all taxes & GST directed by Engineer incharge. (1) Star – Delta Starter 22 HP.

(2) ATS Panel 40 HP.

(3) Dol Starter 2 / 3 / 5 HP.

(4) ATS Panel 30 HP.

(5) ATS Panel 120 HP.

Rewinding of Polder / Oil fill sewage type motor pumpset by using ISI marked finolex or equivalent approved make PVC insulated Water Proof Copper winding wires of suitable size comp. with connection for following. Incl. transportation i.e. from site to workshop & vice versa & loading unloading charges etc.complete also including all taxes & GST directed by Engineer incharge. (a) 100 HP Three Phase 440 V Water filled motor

Mechanical Hydra Charges for Motor Liftting & Lowring Submersible Motor Pump set 100 H.P with M.S Pipe line of 200 mm, casing Pipe & Pipe clamp etc. from Intek well / Lake / Rewer. Incl. transportation i.e. from site to Workshop & vice versa, loading unloading charges etc. complete also including all taxes & GST directed by Engineer incharge.

Rewinding of Induction type motor by using super enamelled copper wire and putting the same in working condition as per original incl. transportation i.e. from site to workshop & loading unloading charges etc.complete also including all taxes & GST directed by Engineer incharge. (a) 120 HP.

Rewinding of Polder / Oil fill sewage type pump motor pump set by using ISI marked finolex or equivalent approved make PVC insulated Water Proof Copper winding wires of suitable size comp. with connection for following. Incl. transportation i.e. from site to workshop & vice versa & loading unloading charges etc. complete also including all taxes & GST directed by Engineer incharge. (a) 50 HP Three Phase 440 V.

Charges for lifting & lowering Induction centrifugal motor pump set Incl. transportation i.e. from site to workshop & vice versa, loading unloading charges etc.complete also including all taxes & GST directed by Engineer incharge. (a) 120 HP

Replacement of Bearing for Induction motor. (a) 120 HP Roller Bearing

(b) 120 HP Ball Bearing

(c) 30 HP Ball Bearing

Replacement of accessories suitable for Polder pump 50 HP calama / MBH make incl. loading unloading Tunning, cutting etc. complete as directed by Engineer incharge. 1) Mechanical Water Seal

2) Mechanical oil seal.

3) Impeller.

4) Bronze bush for Suction Housing

5) Bronze bush Upper/Lower

6) Rotor sleeve inner.

7) Rotor sleeve outer.

8) T.B. Block / Centre bearing.

9) Lock nut for impeller.

10) ‘O’ Ring.

11) Rubber gasket.

12) Stud for diffuser / flange.

13) Lock nut for T.B. Block.

14) Cable water part Joning inc. copper Ferul & Ringlux

Rewinding of ATS Panel 120 HP Transformer by using ISI marked finolex or equivalent approved make Anamal Copper winding wires of suitable size comp. with connection for following. Incl. transportation i.e. from site to workshop & vice versa & loading unloading charges etc. complete also including all taxes & GST directed by Engineer incharge.

Rewinding of oil fill sewage pump motor pumpset by using ISI marked finolex or equivalent approved make Anamal Copper winding wires of suitable size comp. with connection for following. Incl. transportation i.e. from site to workshop & vice versa & loading unloading charges etc.complete also including all taxes & GST directed by Engineer incharge. (a) 22.5 HP Three Phase 440 V.

(b) 10 HP Three Phase 440 V.

Replacement of accessories suitable for oil fill sewage pump 22.5 HP make incl. loading unloading , turnning, cutting complete as directed by Engineer incharge. 1) Mechanical Water Seal

2) Mechanical seal oil seal.

3) Impeller.

4) Roller Bearing.

5) Ball Beraring.

6) Rotor sleeve inner.

7) Rotor sleeve outer.

8) T.B. Block / Centre bearing.

9) Lock nut for impeller.

10) ‘O’ Ring.

11) Rubber gasket.

12) Stud for diffuser / flange.

13) Lock nut for T.B. Block.

14) Winding oil

15) Cable water proof Joning incl. Copper Ferul & Ringlux

Charges for lifting & lowering oil fill sewage submersible motor pump set. 22.5/10 HP Incl. transportation i.e. from site to workshop & vice versa, loading unloading charges etc.complete also including all taxes & GST directed by Engineer incharge.