SITC for Shifting / Modification of 33kV, 11kV and LT Electrical Utilities of TPDDL and dismantling of Street Light Poles infringing in Delhi Portion of Rithala Kundli Corridor of Delhi Metro Phase - IV.

Total Amount including GST

Hi- Pot & Insulation Resistance Testing before energisation of 33kV Cable.

Total of Part A2 (Labour) :

Summary of Estimate

Amount (₹)

Total of Part B2 (Labour)) :

2.5% on Total Amount

Schedule : B (11kV & LT)

Part A 2 (Labour)

Part B 1 (Supply)

Part B 2 (Labour)

Schedule : C (Credit against Released Items)

Total amount of : SCH A + SCH B - SCH C + SCH D

Applicable GST @ 18%

ESTIMATE

Total of Part B2 (Labour)) :

Schedule : A (33kV)

(PART A1) : SUPPLY

Supply of 33kV, 3Cx400 sq.mm power cable having stranded compacted Aluminium Conductor, Screened, XLPE insulated, Extruded semiconducting compound, Water Swellable tape, Copper tape, extruded PVC inner sheathed, Galvanised steel Round wire armoured bind by rubberized cotton tape and PVC outer sheath as TPDDL specifications.

Supply of Heat Shrinkable Outdoor Terminations with Mechanical Lug and possessing UV & Fire retardant property for 33kV, 3Cx400 sq.mm Aluminium Conductor XLPE insulated screened and armoured cables as per TPDDL specifications

Supply of RFID Ball Markers

Supply of Heat Shrinkable Straight Through Joints with shear head bolt (Hexagonal shape) type mechanical connector for jointing of 33kV, 3Cx400 sq.mm Aluminium Conductor XLPE Insulated screened and armoured cable, as per TPDDL specifications.

Supply of HDPE pipe PE-63 grade, DN-200mm and PN-6 Class

Supply of Rail Pole painted with red oxide & aluminium paint.

Supply of Earthing with GI Earth Pipe 40 mm dia, 4.5 Mtr. long with charcol & salt including with enclosure, accessories etc.

Supply of Earthing GI Strip size 50 X 5 mm

Supply of 150 mm dia GI Pipe (Medium Class)

Supply of ACSR WOLF Conductor.

Supply of 33 kV Pin Insulator with Pin washers and Nuts

Supply of Number plate with clamp with all required accessories and complete in all respects.

Supply of Danger plate with clamp with all required accessories and complete in all respects.

Supply of Bow stay set complete (galvanised) with19/20 mm dia x 1.8 mtr long stay rod, anchor plate of size 45cm x 45 cm x 7.5 mm, thimble, stay clamps, bow tightner, 7/4.0mm dia G.I. Stay wire and strain / guy insulator etc.

Supply of Anti Climbing Device for Pole

Supply of cable Route Marker / Joint Marker as per Approved design and specifications.

Supply of Structural Steel Materials like channel, angles, flats, cross arms, clamps, hardware, nut-bolts etc. (GI Type) as per directions of Engineer.

Supply of single piece 33 kV Lightning Arrestor set with complete accessories.

Supply of OFC (48 fibre)

Supply of HDPE PLB Duct(40 mm)

Supply of Joint Enclosure for OFC (Splice)

Supply of Precast RCC Ring Chamber

Total of Part A1 (Supply) :

(PART A2) : LABOUR

Laying, testing and commissioning of on

e number 33 kV Aluminum Conductor XLPE insulated Armoured Cable of 3Cx400 Sq.mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Laying, testing and commissioning of one number additional 33 kV Aluminum Conductor XLPE Insulated Armoured Cable of 3Cx400 Sq.mm size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Laying, testing and commissioning of one number 33 kV Aluminum Conductor XLPE insulated Armoured Cable of 3Cx400 Sq.mm size in the existing Pipe (RCC/ Hume pipe/ Metal Pipe/ HDPE) as required on site.

Excavation of Pits for identification of U/G cable or other utility by manual means over areas (All kinds of soil) and Backfilling of the same as per directions of Engineer-in-charge

Laying of Pipes (HDPE / GI / MS / RCC) exceeding 80 mm dia but No.t exceeding 300 mm dia, including jointing them / providing sockets etc, by Manual Moling or by excavation upto 1.5 Mtr depth, dressing of sides, ramming of bottoms and then returning the soil as required, in layers No.t exceeding 20cm in depth, consolidating each deposited layers by ramming, watering, etc and disposing of surplus excavated soil within a lead of 50 m as per directions of Engineer. .

Making, Testing & Commissioning of Heat Shrinkable Type Straight through Joint Box for 33kV XLPE Insulated Cable of size 3C x 400 Sq.mm, by Authorised / Approved Jointer by OEMs / TPDDL only to claim warranty.

Making, Testing & Commissioning of Heat Shrinkable Type Outdoor termination for 33kV XLPE Insulated Cable of size 3C x 400 Sq.mm by Authorised / Approved Jointer by OEMs / TPDDL only to claim warranty.

Laying/ Installation of 100 mm dia GI Pipe (Medium Class)

Laying/ Installation of 150 mm dia GI Pipe (Medium Class)

Stringing, Testing & Commissioning of ACSR WOLF Conductor.

Installation of 33 kV Pin Insulator with Pin washers and Nuts in complete

Fixing of Danger plate with clamp with all required accessories and complete in all respects.

Erection of Bow stay set complete (galvanised) with19/20 mm dia x 1.8 mtr long stay rod, anchor plate of size 45cm x 45 cm x 7.5 mm, thimble, stay clamps, bow tightner, 7/4.0mm dia G.I. Stay wire and strain insulator etc in cement concrete 1:3:6 grade foundation including excavation and backfilling also with 0.6m long brace of size 50 mm x 50 mm x 6mm angle iron with 50 mm dia pulley fixed at one end of the brace as required.

Installation Testing & Commissioning of Anti Climbing Device for Poles.

SITC of Wooden Cleats set, MS Strip and hardware for fixing of cable including painting one coat of red oxide & two coat of black paint.

SITC of HDPE Cleats set, MS Strip and hardware for fixing of cable including painting one coat of red oxide & two coat of black paint.

Erection of PCC/ Rail / ST Pole (Above 8 mtr and upto 13 Mtr long) in brick ballast and ramming the foundation with cement concrete (1:2:4) included excavation, backfilling & disposal of surplus mulba within 50 metres lead as per directions of Engineer.

Painting of Pole with Black & Yellow Strips / Zebra as per TPDDL Specification

Painting of Cable with Fire Retardant Paint (Supply of Paint includes) as per TPDDL Specification. This items will be used on the externally exposed cable.

Fixing & Painting of wire mesh fencing for protection of Transformer, RMU etc. as per approved design, specifications and site requirements.

Fixing of cable Route Marker / Joint Marker as per Approved design and specifications.

Dismantling of overhead line comprising of copper / Aluminium over head conductor, AB cables, G.I. Wire, cross arms, insulator, hardware fittings, etc as required (Mtr/ckt) including earth, guard wire etc.

Dismantling of pole (PCC / Rail / ST) complete.

HDD Work (Trenchless) of PLB duct 40mm (This item is applicable, where no other HDD for Power cable is being done)

Performing of Fault Locating / Tracing of Cable Route by using modern technology.

OFC Laying (inside through duct)

Hi- Pot & Insulation Resistance Testing before energisation of 11kV & LT Cable.

Splicing of 48 Fibre OFC

ESTIMATE

Schedule : B (11kV & LT)

(PART B1) : SUPPLY

Supply of 11kV power cable having stranded compacted Aluminium Conductor, screened, XLPE Insulated, extruded semiconducting compound, water swellable tape,Copper tape, extruded PVC inner sheathed, Galvanised Steel Round wire armoured bind by rubberized cotten tape and PVC outer sheath, of following sizes as per TPDDL specifications.

Supply of Heat Shrinkable Straight Through Joints with shear head bolt (Hexagonal shape) type mechanical connector for jointing of 11kV Aluminium Conductor XLPE Insulated screened and armoured Cables of following sizes as per TPDDL specifications. 3Cx400 sq. mm. – 3Cx400 sq. mm. or 3Cx400 sq. mm. – 3Cx300 sq. mm.

Supply of Heat Shrinkable Outdoor Terminations with crimping Al. Lug and possessing UV & Fire retardant property for 11kV Aluminium Conductor XLPE insulated screened and armoured cable of following sizes as per TPDDL specifications

Supply of Heat Shrinkable Indoor Terminations with crimping Al. Lug and possessing UV & Fire retardant property for 11kV Aluminium Conductor XLPE insulated screened and armoured cable of following sizes as per TPDDL specifications.

Supply of 1.1 kV (LT) power cable, having stranded compacted Aluminium Conductor, XLPE Insulated, Extruded PVC Inner sheath, Galvanised Steel Round Armoured and PVC outer sheathed, of following sizes as per TPDDL specifications.

Supply of Heat Shrinkable Straight Through Joints with long barrel Aluminium Ferrules for 1.1 kV ( LT) Aluminium conductor XLPE insulated unscreened and armoured cable of following sizes as per TPDDL specifications.

Supply of RFID Ball Markers

Supply of Heat Shrinkable Outdoor Terminations with crimping Al. Lug and possessing UV & Fire retardant property for 1.1 kV ( LT) Aluminium conductor XLPE insulated unscreened and armoured cable of following sizes as per TPDDL specifications.

Supply of HDPE pipe PE-63 grade, DN-160mm and PN-6 Class

Supply of 11 Meter long PCC Pole having working load capacity of 365kg and as per latest version of IS:1678, as per TPDDL specification.

Supply of 9 Meter long PCC Pole having working load capacity of 160kg and as per latest version of IS:1678 as per TPDDL Specification.

Supply of HT (11 kV) AB Cable 3Cx185 sq.mm + 1Cx150 sq mm messeger wire, as per latest version of IS: 7098 (part-2) and IS: 398 as per TPDDL specifications.

Supply of Single core heat shrink joint for HT (11 kV) 3Cx150 sq mm. AB cable with all required acessories and complete in all respect as per TPDDL specifications.

Supply of Single core heat shrink O/D Termination for HT (11 kV) 3Cx150 sq mm. AB cables with all required acessories and complete in all respect as per TPDDL Specification.

Supply of 1100 V AB Cable 4C X150 sq.mm + 1C X 16 sq.mm + 1C X 150 sq mm messeger wire, complete as per TPDDL Specification.

Supply of 100 mm dia GI Pipe (Medium Class)

Supply of Earthing with GI Earth Pipe 40 mm dia, 4.5 Mtr. long with charcol & salt including with enclosure, accessories etc.

Supply of Earthing GI Strip size 50 X 5 mm

Supply of Earthing GI Strip size 25 X 5 mm

Supply of Earthing GI wire size of 6 S.W.G .

Supply of 11kV 3 way Non-motorized operated (2 LBS+1 VCB) both side extensible outdoor RMU complete in all respects as per TPDDL Specification.

Supply of 11kV 4 way Non-motorized operated (2 LBS+2 VCB) both side extensible outdoor RMU complete in all respects as per TPDDL Specification.

Supply of (3P + 1N) LT ACB - 400 Amp O/D manually Operated complete in all respects as per TPDDL specification.

Supply of Distribution Box with 100 A, 25kA TP MCCB, 5 Nos O/G as per TPDDL Specification.

Supply of Distribution Box with 250 A, 35kA TP MCCB, 10 Nos O/G as per TPDDL specification.

Supply of 25 KVA, 1 PH, 6.35 kV/ 250 V Transformer as per TPDDL specification.

Supply of 100 KVA, 3 PH, 11 kV/ 433 V Transformer as per TPDDL specification.

Supply of 11kV Lightenung Arrestor of (1 Set-3 piece)

Supply of GO and DO switch for 11kV, 200 Amp (Polymeric) with required fuse in complete in all respect.

Supply of ACSR DOG Conductor.

Supply of 11 KV Polymeric Disc Insulator

Supply of 11 KV Polymeric Pin Insulator

Supply of H/W Fitting for 11kV Disc Insulator in complete

Supply of Number plate with clamp with all required accessories and complete in all respects.

Supply of Danger plate with clamp with all required accessories and complete in all respects.

Supply of Bow stay set complete (galvanised) with19/20 mm dia x 1.8 mtr long stay rod, anchor plate of size 45cm x 45 cm x 7.5 mm, thimble, stay clamps, bow tightner, 7/4.0mm dia G.I. Stay wire and strain / guy insulator etc.

Supply of Anti Climbing Device for Pole

Supply of cable Route Marker / Joint Marker as per Approved design and specifications.

Supply of Structural Steel Materials like channel, angles, flats, cross arms, clamps, hardware, nut-bolts etc. (GI Type) as per directions of Engineer.

Supply of wire mesh fencing for protection of Transformer, RMU etc. as per approved design, specifications and site requirements.

Total of Part B1 (Supply) :

(PART B2) : LABOUR

Laying, Testing and Commissioning of one number XLPE Insulated and PVC sheathed power cable of 11 kV grade of size (120sq.mm - 400sq.mm) direct in ground including excavation, sand cushioning, protective covering, refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Laying, Testing and Commissioning of one number additional XLPE Insulated and PVC sheathed power cable of 11 kV grade of size (120sq.mm - 400sq.mm) direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering, refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Laying Testing and Commissioning of one number XLPE Insulated and PVC sheathed power cable of 11 kV grade of size (120sq.mm - 400sq.mm) in the existing Pipe (RCC / HUME / METAL / HDPE) as required on site.

Making, Testing & Commissioning of Heat Shrinkable Type Straight through Joint Box for 11kV XLPE Insulated Cable of size 3C x 400 or 3C x 300 Sq.mm, by Authorised / Approved Jointer by OEMs / TPDDL only to claim warranty.

Making, Testing & Commissioning of Heat Shrinkable Type Outdoor or Indoor termination for 11kV XLPE Insulated Cable of size 3C x 400 or 3C x 300 Sq.mm by Authorised / Approved Jointer by OEMs / TPDDL only, to claim warranty.

Laying Testing and Commissioning of one number XLPE / PVC Insulated and PVC sheathed power cable of 1.1 kV (LT) grade of following sizes, direct in ground including excavation, sand cushioning, protective covering, refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Laying, Testing and Commissioning of one number additional XLPE / PVC Insulated and PVC sheathed power cable of 1.1 kV (LT) grade of following sizes direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Laying of one number XLPE / PVC Insulated and PVC sheathed power cable of 1.1 kV (LT) grade of size 185sq.mm - 400sq.mm in the existing RCC / HUME / METAL / HDPE pipes as required.

Making,Testing & commissioning of Heat Shrinkable Type Outdoor Termination for 1.1 KV (LT) cable complete in all respect.

Making,Testing & commissioning of Heat Shrinkable Type Straight Through Joint for 1.1 KV (LT) Cable complete in all respect.

Excavation of Pits for identification of U/G cable or other utility by manual means over areas (All kinds of soil) and Backfilling of the same as per directions of Engineer-in-charge

Laying of Pipes (HDPE / GI / MS / RCC) exceeding 80 mm dia but No.t exceeding 300 mm dia, including jointing them / providing sockets etc, by Manual Moling or by excavation upto 1.5 Mtr depth, dressing of sides, ramming of bottoms and then returning the soil as required, in layers No.t exceeding 20cm in depth, consolidating each deposited layers by ramming, watering, etc and disposing of surplus excavated soil within a lead of 50 m as per directions of Engineer. .

Crossing of Roads by Trenchless technology and laying of HDPE / Metal Pipes of dia 160 mm including jointing of pipes etc. as required at site.

Stringing, Testing & Commisioning of 11 kV, HT AB Cable 3C X185 sq.mm + 1C X 150 sq mm messeger wire, complete as per direction of Engineer and site requirement.

Making, Testing & Commissioning of Single core heat shrink joint for HT (11 kV) 3C x 185 sq mm. AB cables with all required ace

ssories and complete in all respect.

Making Testing & Commissioning of Single core heat shrink O/D Termination for HT (11 kV) 3C x 185 sq mm. AB cables with all required acessories and complete in all respect.

Stringing, Testing & Commisioning of 1100 V AB Cable 4C X150 sq.mm + 1C X 16 sq.mm + 1C X 150 sq mm messeger wire, complete as per direction of Engineer and site requirement.

Laying/ Installation of 100 mm dia GI Pipe (Medium Class)

Installation of Earthing with GI Earth Pipe 40 mm dia, 4.5 Mtr. long in complete..

Laying of Earthing GI Strip size 50 X 5 mm & 25 x 5 mm

Laying of Earthing GI wire size of 6 S.W.G .

Installation,Testing & Commissioning of New 11kV RMU (3 Way / 4 Way) including making of foundation, making all electrical connections complete as per directions of Engineer.

Removing of all existing electrical connections from existing RMU as required for shifting of the equipment as per site requirements.

Shifting of 11 kV existing RMU from existing place with the help of crane or chain pulling block and Installation at new place with proper safety measures including Making of all necessary electrical connections complete in all respects.

Dismantling of ACBs from old location including removing of all existing electrical connections and Installation at new place.

Making all electrical connections of LT cable / overhead LT Line with ACBs as per site requirements.

Shifting, Installation, testing & commissioning of Existing LT Feeder pillar / Service Pillar including making all electrical connections complete in all respects as per directions of Engineer.

Installation, testing & commissioning of New / Existing 3-phase LT junction/ Distribution box and making all electrical connections of LT cable, service mains etc. complete as per directions of Engineer.

Removing of all existing electrical connections from 250 KVA to 990 KVA transformers , as required for shifting of the equipment as per site requirements.

Shifting of 11 kV Distribution transformer (250 KVA-990 KVA) from existing place with the help of crane or chain pulling block and Installation at new place with proper safety measures including Making of all necessary electrical connections complete in all respects.

Installation of 11kV, LA (1 set = 3 Nos)

Installation, Testing & Commissioning of GO and DO switch for 11kV, 200 Amp (Polymeric) with connecting required fuse in complete in all respect.

Stringing, Testing & Commissioning of ACSR DOG Conductor.

Installation of 11 KV Pin Insulator & Disc Insulator with all hardware fittings & accessories.

Fixing of Danger plate with clamp with all required accessories and complete in all respects.

Erection of Bow stay set complete (galvanised) with19/20 mm dia x 1.8 mtr long stay rod, anchor plate of size 45cm x 45 cm x 7.5 mm, thimble, stay clamps, bow tightner, 7/4.0mm dia G.I. Stay wire and strain insulator etc in cement concrete 1:3:6 grade foundation including excavation and backfilling also with 0.6m long brace of size 50 mm x 50 mm x 6mm angle iron with 50 mm dia pulley fixed at one end of the brace as required.

Installation Testing & Commissioning of Anti Climbing Device for Poles.

SITC of Wooden Cleats set, MS Strip and hardware for fixing of cable including painting one coat of red oxide & two coat of black paint.

SITC of HDPE Cleats set, MS Strip and hardware for fixing of cable including painting one coat of red oxide & two coat of black paint.

Erection of PCC/ Rail / ST Pole (Above 8 mtr and upto 13 Mtr long) in brick ballast and ramming the foundation with cement concrete (1:2:4) included excavation, backfilling & disposal of surplus mulba within 50 metres lead as per directions of Engineer.

Painting of Pole with Black & Yellow Strips / Zebra as per TPDDL Specification

Painting of Cable with Fire Retardant Paint (Supply of Paint includes) as per TPDDL Specification. This items will be used on the externally exposed cable.

Fabrication, Straightening, cutting, bending, and placing in position of GI Structural Steel.

Fixing & Painting of wire mesh fencing for protection of Transformer, RMU etc. as per approved design, specifications and site requirements.

Fixing of cable Route Marker / Joint Marker as per Approved design and specifications.

Dismantling of overhead line comprising of copper / Aluminium over head conductor, AB cables, G.I. Wire, cross arms, insulator, hardware fittings, etc as required (Mtr/ckt) including earth, guard wire etc.

Dismantling of pole (PCC / Rail / ST) complete.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 ( 1 cement and 4 coarse sand).

Providing and Laying of cement concrete mix of grade 1:1.5:3 (M-20) grade.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 mtr lead as per directions of Engineer-In-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Hi- Pot & Insulation Resistance Testing before energisation of 11kV & LT Cable.

Performing of Fault Locating / Tracing of Cable Route by using modern technology.

ESTIMATE

(Schedule C) : CREDIT against RELEASED MATERIAL

Release of PCC poles

Release of Steel / Iron scrap

Release of Al. Conductor (Dog, Wolf, Weisel, Goat etc.)

Release of LT AB Conductor & Cable

Release of HT AB Conductor & Cable

Release of LT U/G cables in scrap

Release of HT U/G cables in scrap

Total of Schedule C (Credit against Released Material) :

ESTIMATE

Schedule : D (High Mast & Street Lights)

Supply of XLPE insulated PVC sheathed AL. cond. Armoured cable of 1.1 KV grade conforming to IS: 7098 part - 1 of following size.

Supply and Laying of 3 core 2.5 sqmm copper conductor FR PVC cable

Supply and Laying of 4 core 6 sqmm copper conductor FR PVC cable

Supply and Laying of DWC Pipes OD 63mm in existing trench, complete as required at site

Supply and Laying of DWC Pipes OD 90mm in existing trench, complete as required at site

Supply and Laying of DWC Pipes OD 120mm in existing trench, complete as required at site

Laying of One number PVC Insulated LT cable (1100 V) direct in ground including excavtaion, sand cushioning, protective covering and refilling the trench.

Supplying and fixing 4 Nos. 25 mm. dia X 700 mm. long GI foundation bolt (EN8grade) with nuts, washer including 2 Nos. template of 3 mm. thick size 240 X 240 mm. with 4 Nos. 28 mm. dia holes, to match with PCD of Pole base plate as reqd (For 8 Mtr. 9Mtr & 10 Mtr. Pole)

Supplying and fixing 4 Nos. 25 mm. dia X 800 mm. long GI foundation bolt (EN8grade) with nuts, washer including 2 Nos. template of 4 mm. thick size 310 X 310 mm. with 4 Nos. 28 mm. dia holes, to match with PCD of Pole base plate as reqd (For 12 M Poles)

Excavation of Pits for identification of U/G cable or other utility by manual means over areas (All kinds of soil) and Backfilling of the same as per directions of Engineer-in-charge

Providing and Laying of cement concrete mix of grade 1:1.5:3 (M-20) grade.

Supply, straightening, cutting, bending, binding and placing in position of TMT bars (Fe- 500D or More)

Providing of 12 mm cement plaster of mix : 1 cement: 4 fine sand)

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, columns etc

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 ( 1 cement and 4 coarse sand).

Dismantling of Street lights poles embedded in cement concrete foundation etc. including removal of lamp fittings, accessories completely as per directions of Engineer-In-Charge.

Erection of Street Light Pole with installation of Single / Double Arm, Fittings, Luminaries, Making Connection etc in complete

Dismantling of High Mast along with Fittings, Steel rope, Motor etc in complete

Erection of High Mast along with Fittings, Steel rope, Motor etc in complete

Shifting of St light Poles / High Mast alongwith accessories complete in a trailer vehicle from one place to other designated place, as per the direction of Engineer in charge (Transportation & handling includes)

Supply of Type A feeder Pillar as per specification of Owing agency

Supply of Type B feeder Pillar as per specification of Owing agency

Supply of Service Pillar as per specification of Owing agency

Installation Testing & Commissioning of Feeder Pillar / Service pillar with making foundation & all electrical connections etc in complete.

Supply, Installation, Testing and Commissioning of LED street Light fixtures as per the specifications of Owing agency in complete.

Supply & Instalation of 6mm thick laminated sheet with 4P, 63 Amp terminal block for suitable for 25 sq mm conductor - 4 nos. & shorting links on DIN channel i/c pdg and fixing DIN channel of suitable length - 2 nos. on the existing laminated sheet and including supplying and fixing 6 amp. SPMCB 'C' Characteristics curve

Providing round the clock security guard without gun for watch & ward of Government premises and its all belongings by deployingneatly dressed security guards in 8 hour’s shift including necessary T&P like torch, lathi and uniform etc.complete,as per the direction of Engineer-in-charge.(One job means 8 hour’s duty). In case of theft / pilferage, the cost of missing items shall be recovered from the contractor.

Total of Schedule D (High Mast & Street Lights) :